ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.29.128.0/17
network10.29.128.0/17
broadcast10.29.255.255
first host10.29.128.1
last host10.29.255.254
subnet mask255.255.128.0
wildcard0.0.127.255
addresses32,768
usable hosts32,766
classA
ipcalc 10.29.128.0/17
address00001010.00011101.10000000.00000000
subnet mask11111111.11111111.10000000.00000000
network00001010.00011101.10000000.00000000
broadcast00001010.00011101.11111111.11111111
green = network part, grey = host part
hex0x0a1d8000
decimal169705472
reverse dns0.128.29.10.in-addr.arpa
ipv4-mapped::ffff:a1d:8000

/17 split into /23 · 64 subnets

close ×
#networkhost rangebroadcast
110.29.128.0/2310.29.128.1 – 10.29.129.25410.29.129.255
210.29.130.0/2310.29.130.1 – 10.29.131.25410.29.131.255
310.29.132.0/2310.29.132.1 – 10.29.133.25410.29.133.255
410.29.134.0/2310.29.134.1 – 10.29.135.25410.29.135.255
510.29.136.0/2310.29.136.1 – 10.29.137.25410.29.137.255
610.29.138.0/2310.29.138.1 – 10.29.139.25410.29.139.255
710.29.140.0/2310.29.140.1 – 10.29.141.25410.29.141.255
810.29.142.0/2310.29.142.1 – 10.29.143.25410.29.143.255
910.29.144.0/2310.29.144.1 – 10.29.145.25410.29.145.255
1010.29.146.0/2310.29.146.1 – 10.29.147.25410.29.147.255
1110.29.148.0/2310.29.148.1 – 10.29.149.25410.29.149.255
1210.29.150.0/2310.29.150.1 – 10.29.151.25410.29.151.255
1310.29.152.0/2310.29.152.1 – 10.29.153.25410.29.153.255
1410.29.154.0/2310.29.154.1 – 10.29.155.25410.29.155.255
1510.29.156.0/2310.29.156.1 – 10.29.157.25410.29.157.255
1610.29.158.0/2310.29.158.1 – 10.29.159.25410.29.159.255
1710.29.160.0/2310.29.160.1 – 10.29.161.25410.29.161.255
1810.29.162.0/2310.29.162.1 – 10.29.163.25410.29.163.255
1910.29.164.0/2310.29.164.1 – 10.29.165.25410.29.165.255
2010.29.166.0/2310.29.166.1 – 10.29.167.25410.29.167.255
2110.29.168.0/2310.29.168.1 – 10.29.169.25410.29.169.255
2210.29.170.0/2310.29.170.1 – 10.29.171.25410.29.171.255
2310.29.172.0/2310.29.172.1 – 10.29.173.25410.29.173.255
2410.29.174.0/2310.29.174.1 – 10.29.175.25410.29.175.255
2510.29.176.0/2310.29.176.1 – 10.29.177.25410.29.177.255
2610.29.178.0/2310.29.178.1 – 10.29.179.25410.29.179.255
2710.29.180.0/2310.29.180.1 – 10.29.181.25410.29.181.255
2810.29.182.0/2310.29.182.1 – 10.29.183.25410.29.183.255
2910.29.184.0/2310.29.184.1 – 10.29.185.25410.29.185.255
3010.29.186.0/2310.29.186.1 – 10.29.187.25410.29.187.255
3110.29.188.0/2310.29.188.1 – 10.29.189.25410.29.189.255
3210.29.190.0/2310.29.190.1 – 10.29.191.25410.29.191.255
3310.29.192.0/2310.29.192.1 – 10.29.193.25410.29.193.255
3410.29.194.0/2310.29.194.1 – 10.29.195.25410.29.195.255
3510.29.196.0/2310.29.196.1 – 10.29.197.25410.29.197.255
3610.29.198.0/2310.29.198.1 – 10.29.199.25410.29.199.255
3710.29.200.0/2310.29.200.1 – 10.29.201.25410.29.201.255
3810.29.202.0/2310.29.202.1 – 10.29.203.25410.29.203.255
3910.29.204.0/2310.29.204.1 – 10.29.205.25410.29.205.255
4010.29.206.0/2310.29.206.1 – 10.29.207.25410.29.207.255
4110.29.208.0/2310.29.208.1 – 10.29.209.25410.29.209.255
4210.29.210.0/2310.29.210.1 – 10.29.211.25410.29.211.255
4310.29.212.0/2310.29.212.1 – 10.29.213.25410.29.213.255
4410.29.214.0/2310.29.214.1 – 10.29.215.25410.29.215.255
4510.29.216.0/2310.29.216.1 – 10.29.217.25410.29.217.255
4610.29.218.0/2310.29.218.1 – 10.29.219.25410.29.219.255
4710.29.220.0/2310.29.220.1 – 10.29.221.25410.29.221.255
4810.29.222.0/2310.29.222.1 – 10.29.223.25410.29.223.255
4910.29.224.0/2310.29.224.1 – 10.29.225.25410.29.225.255
5010.29.226.0/2310.29.226.1 – 10.29.227.25410.29.227.255
5110.29.228.0/2310.29.228.1 – 10.29.229.25410.29.229.255
5210.29.230.0/2310.29.230.1 – 10.29.231.25410.29.231.255
5310.29.232.0/2310.29.232.1 – 10.29.233.25410.29.233.255
5410.29.234.0/2310.29.234.1 – 10.29.235.25410.29.235.255
5510.29.236.0/2310.29.236.1 – 10.29.237.25410.29.237.255
5610.29.238.0/2310.29.238.1 – 10.29.239.25410.29.239.255
5710.29.240.0/2310.29.240.1 – 10.29.241.25410.29.241.255
5810.29.242.0/2310.29.242.1 – 10.29.243.25410.29.243.255
5910.29.244.0/2310.29.244.1 – 10.29.245.25410.29.245.255
6010.29.246.0/2310.29.246.1 – 10.29.247.25410.29.247.255
6110.29.248.0/2310.29.248.1 – 10.29.249.25410.29.249.255
6210.29.250.0/2310.29.250.1 – 10.29.251.25410.29.251.255
6310.29.252.0/2310.29.252.1 – 10.29.253.25410.29.253.255
6410.29.254.0/2310.29.254.1 – 10.29.255.25410.29.255.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /17
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,7661
/18255.255.192.016,38416,3822 split →
/19255.255.224.08,1928,1904 split →
/20255.255.240.04,0964,0948 split →
/21255.255.248.02,0482,04616 split →
/22255.255.252.01,0241,02232 split →
/23255.255.254.051251064 split →
/24255.255.255.0256254128 split →
/25255.255.255.128128126256 split →
/26255.255.255.1926462512 split →
/27255.255.255.22432301,024 split →
/28255.255.255.24016142,048 split →
/29255.255.255.248864,096 split →
/30255.255.255.252428,192 split →
/31255.255.255.2542216,384 split →
/32255.255.255.2551132,768 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →