ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.28.72.0/22
network10.28.72.0/22
broadcast10.28.75.255
first host10.28.72.1
last host10.28.75.254
subnet mask255.255.252.0
wildcard0.0.3.255
addresses1,024
usable hosts1,022
classA
ipcalc 10.28.72.0/22
address00001010.00011100.01001000.00000000
subnet mask11111111.11111111.11111100.00000000
network00001010.00011100.01001000.00000000
broadcast00001010.00011100.01001011.11111111
green = network part, grey = host part
hex0x0a1c4800
decimal169625600
reverse dns0.72.28.10.in-addr.arpa
ipv4-mapped::ffff:a1c:4800

/22 split into /28 · 64 subnets

close ×
#networkhost rangebroadcast
110.28.72.0/2810.28.72.1 – 10.28.72.1410.28.72.15
210.28.72.16/2810.28.72.17 – 10.28.72.3010.28.72.31
310.28.72.32/2810.28.72.33 – 10.28.72.4610.28.72.47
410.28.72.48/2810.28.72.49 – 10.28.72.6210.28.72.63
510.28.72.64/2810.28.72.65 – 10.28.72.7810.28.72.79
610.28.72.80/2810.28.72.81 – 10.28.72.9410.28.72.95
710.28.72.96/2810.28.72.97 – 10.28.72.11010.28.72.111
810.28.72.112/2810.28.72.113 – 10.28.72.12610.28.72.127
910.28.72.128/2810.28.72.129 – 10.28.72.14210.28.72.143
1010.28.72.144/2810.28.72.145 – 10.28.72.15810.28.72.159
1110.28.72.160/2810.28.72.161 – 10.28.72.17410.28.72.175
1210.28.72.176/2810.28.72.177 – 10.28.72.19010.28.72.191
1310.28.72.192/2810.28.72.193 – 10.28.72.20610.28.72.207
1410.28.72.208/2810.28.72.209 – 10.28.72.22210.28.72.223
1510.28.72.224/2810.28.72.225 – 10.28.72.23810.28.72.239
1610.28.72.240/2810.28.72.241 – 10.28.72.25410.28.72.255
1710.28.73.0/2810.28.73.1 – 10.28.73.1410.28.73.15
1810.28.73.16/2810.28.73.17 – 10.28.73.3010.28.73.31
1910.28.73.32/2810.28.73.33 – 10.28.73.4610.28.73.47
2010.28.73.48/2810.28.73.49 – 10.28.73.6210.28.73.63
2110.28.73.64/2810.28.73.65 – 10.28.73.7810.28.73.79
2210.28.73.80/2810.28.73.81 – 10.28.73.9410.28.73.95
2310.28.73.96/2810.28.73.97 – 10.28.73.11010.28.73.111
2410.28.73.112/2810.28.73.113 – 10.28.73.12610.28.73.127
2510.28.73.128/2810.28.73.129 – 10.28.73.14210.28.73.143
2610.28.73.144/2810.28.73.145 – 10.28.73.15810.28.73.159
2710.28.73.160/2810.28.73.161 – 10.28.73.17410.28.73.175
2810.28.73.176/2810.28.73.177 – 10.28.73.19010.28.73.191
2910.28.73.192/2810.28.73.193 – 10.28.73.20610.28.73.207
3010.28.73.208/2810.28.73.209 – 10.28.73.22210.28.73.223
3110.28.73.224/2810.28.73.225 – 10.28.73.23810.28.73.239
3210.28.73.240/2810.28.73.241 – 10.28.73.25410.28.73.255
3310.28.74.0/2810.28.74.1 – 10.28.74.1410.28.74.15
3410.28.74.16/2810.28.74.17 – 10.28.74.3010.28.74.31
3510.28.74.32/2810.28.74.33 – 10.28.74.4610.28.74.47
3610.28.74.48/2810.28.74.49 – 10.28.74.6210.28.74.63
3710.28.74.64/2810.28.74.65 – 10.28.74.7810.28.74.79
3810.28.74.80/2810.28.74.81 – 10.28.74.9410.28.74.95
3910.28.74.96/2810.28.74.97 – 10.28.74.11010.28.74.111
4010.28.74.112/2810.28.74.113 – 10.28.74.12610.28.74.127
4110.28.74.128/2810.28.74.129 – 10.28.74.14210.28.74.143
4210.28.74.144/2810.28.74.145 – 10.28.74.15810.28.74.159
4310.28.74.160/2810.28.74.161 – 10.28.74.17410.28.74.175
4410.28.74.176/2810.28.74.177 – 10.28.74.19010.28.74.191
4510.28.74.192/2810.28.74.193 – 10.28.74.20610.28.74.207
4610.28.74.208/2810.28.74.209 – 10.28.74.22210.28.74.223
4710.28.74.224/2810.28.74.225 – 10.28.74.23810.28.74.239
4810.28.74.240/2810.28.74.241 – 10.28.74.25410.28.74.255
4910.28.75.0/2810.28.75.1 – 10.28.75.1410.28.75.15
5010.28.75.16/2810.28.75.17 – 10.28.75.3010.28.75.31
5110.28.75.32/2810.28.75.33 – 10.28.75.4610.28.75.47
5210.28.75.48/2810.28.75.49 – 10.28.75.6210.28.75.63
5310.28.75.64/2810.28.75.65 – 10.28.75.7810.28.75.79
5410.28.75.80/2810.28.75.81 – 10.28.75.9410.28.75.95
5510.28.75.96/2810.28.75.97 – 10.28.75.11010.28.75.111
5610.28.75.112/2810.28.75.113 – 10.28.75.12610.28.75.127
5710.28.75.128/2810.28.75.129 – 10.28.75.14210.28.75.143
5810.28.75.144/2810.28.75.145 – 10.28.75.15810.28.75.159
5910.28.75.160/2810.28.75.161 – 10.28.75.17410.28.75.175
6010.28.75.176/2810.28.75.177 – 10.28.75.19010.28.75.191
6110.28.75.192/2810.28.75.193 – 10.28.75.20610.28.75.207
6210.28.75.208/2810.28.75.209 – 10.28.75.22210.28.75.223
6310.28.75.224/2810.28.75.225 – 10.28.75.23810.28.75.239
6410.28.75.240/2810.28.75.241 – 10.28.75.25410.28.75.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /22
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,0221
/23255.255.254.05125102 split →
/24255.255.255.02562544 split →
/25255.255.255.1281281268 split →
/26255.255.255.192646216 split →
/27255.255.255.224323032 split →
/28255.255.255.240161464 split →
/29255.255.255.24886128 split →
/30255.255.255.25242256 split →
/31255.255.255.25422512 split →
/32255.255.255.255111,024 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →