ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.28.0.0/15
network10.28.0.0/15
broadcast10.29.255.255
first host10.28.0.1
last host10.29.255.254
subnet mask255.254.0.0
wildcard0.1.255.255
addresses131,072
usable hosts131,070
classA
ipcalc 10.28.0.0/15
address00001010.00011100.00000000.00000000
subnet mask11111111.11111110.00000000.00000000
network00001010.00011100.00000000.00000000
broadcast00001010.00011101.11111111.11111111
green = network part, grey = host part
hex0x0a1c0000
decimal169607168
reverse dns0.0.28.10.in-addr.arpa
ipv4-mapped::ffff:a1c:0

/15 split into /21 · 64 subnets

close ×
#networkhost rangebroadcast
110.28.0.0/2110.28.0.1 – 10.28.7.25410.28.7.255
210.28.8.0/2110.28.8.1 – 10.28.15.25410.28.15.255
310.28.16.0/2110.28.16.1 – 10.28.23.25410.28.23.255
410.28.24.0/2110.28.24.1 – 10.28.31.25410.28.31.255
510.28.32.0/2110.28.32.1 – 10.28.39.25410.28.39.255
610.28.40.0/2110.28.40.1 – 10.28.47.25410.28.47.255
710.28.48.0/2110.28.48.1 – 10.28.55.25410.28.55.255
810.28.56.0/2110.28.56.1 – 10.28.63.25410.28.63.255
910.28.64.0/2110.28.64.1 – 10.28.71.25410.28.71.255
1010.28.72.0/2110.28.72.1 – 10.28.79.25410.28.79.255
1110.28.80.0/2110.28.80.1 – 10.28.87.25410.28.87.255
1210.28.88.0/2110.28.88.1 – 10.28.95.25410.28.95.255
1310.28.96.0/2110.28.96.1 – 10.28.103.25410.28.103.255
1410.28.104.0/2110.28.104.1 – 10.28.111.25410.28.111.255
1510.28.112.0/2110.28.112.1 – 10.28.119.25410.28.119.255
1610.28.120.0/2110.28.120.1 – 10.28.127.25410.28.127.255
1710.28.128.0/2110.28.128.1 – 10.28.135.25410.28.135.255
1810.28.136.0/2110.28.136.1 – 10.28.143.25410.28.143.255
1910.28.144.0/2110.28.144.1 – 10.28.151.25410.28.151.255
2010.28.152.0/2110.28.152.1 – 10.28.159.25410.28.159.255
2110.28.160.0/2110.28.160.1 – 10.28.167.25410.28.167.255
2210.28.168.0/2110.28.168.1 – 10.28.175.25410.28.175.255
2310.28.176.0/2110.28.176.1 – 10.28.183.25410.28.183.255
2410.28.184.0/2110.28.184.1 – 10.28.191.25410.28.191.255
2510.28.192.0/2110.28.192.1 – 10.28.199.25410.28.199.255
2610.28.200.0/2110.28.200.1 – 10.28.207.25410.28.207.255
2710.28.208.0/2110.28.208.1 – 10.28.215.25410.28.215.255
2810.28.216.0/2110.28.216.1 – 10.28.223.25410.28.223.255
2910.28.224.0/2110.28.224.1 – 10.28.231.25410.28.231.255
3010.28.232.0/2110.28.232.1 – 10.28.239.25410.28.239.255
3110.28.240.0/2110.28.240.1 – 10.28.247.25410.28.247.255
3210.28.248.0/2110.28.248.1 – 10.28.255.25410.28.255.255
3310.29.0.0/2110.29.0.1 – 10.29.7.25410.29.7.255
3410.29.8.0/2110.29.8.1 – 10.29.15.25410.29.15.255
3510.29.16.0/2110.29.16.1 – 10.29.23.25410.29.23.255
3610.29.24.0/2110.29.24.1 – 10.29.31.25410.29.31.255
3710.29.32.0/2110.29.32.1 – 10.29.39.25410.29.39.255
3810.29.40.0/2110.29.40.1 – 10.29.47.25410.29.47.255
3910.29.48.0/2110.29.48.1 – 10.29.55.25410.29.55.255
4010.29.56.0/2110.29.56.1 – 10.29.63.25410.29.63.255
4110.29.64.0/2110.29.64.1 – 10.29.71.25410.29.71.255
4210.29.72.0/2110.29.72.1 – 10.29.79.25410.29.79.255
4310.29.80.0/2110.29.80.1 – 10.29.87.25410.29.87.255
4410.29.88.0/2110.29.88.1 – 10.29.95.25410.29.95.255
4510.29.96.0/2110.29.96.1 – 10.29.103.25410.29.103.255
4610.29.104.0/2110.29.104.1 – 10.29.111.25410.29.111.255
4710.29.112.0/2110.29.112.1 – 10.29.119.25410.29.119.255
4810.29.120.0/2110.29.120.1 – 10.29.127.25410.29.127.255
4910.29.128.0/2110.29.128.1 – 10.29.135.25410.29.135.255
5010.29.136.0/2110.29.136.1 – 10.29.143.25410.29.143.255
5110.29.144.0/2110.29.144.1 – 10.29.151.25410.29.151.255
5210.29.152.0/2110.29.152.1 – 10.29.159.25410.29.159.255
5310.29.160.0/2110.29.160.1 – 10.29.167.25410.29.167.255
5410.29.168.0/2110.29.168.1 – 10.29.175.25410.29.175.255
5510.29.176.0/2110.29.176.1 – 10.29.183.25410.29.183.255
5610.29.184.0/2110.29.184.1 – 10.29.191.25410.29.191.255
5710.29.192.0/2110.29.192.1 – 10.29.199.25410.29.199.255
5810.29.200.0/2110.29.200.1 – 10.29.207.25410.29.207.255
5910.29.208.0/2110.29.208.1 – 10.29.215.25410.29.215.255
6010.29.216.0/2110.29.216.1 – 10.29.223.25410.29.223.255
6110.29.224.0/2110.29.224.1 – 10.29.231.25410.29.231.255
6210.29.232.0/2110.29.232.1 – 10.29.239.25410.29.239.255
6310.29.240.0/2110.29.240.1 – 10.29.247.25410.29.247.255
6410.29.248.0/2110.29.248.1 – 10.29.255.25410.29.255.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /15
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,0701
/16255.255.0.065,53665,5342 split →
/17255.255.128.032,76832,7664 split →
/18255.255.192.016,38416,3828 split →
/19255.255.224.08,1928,19016 split →
/20255.255.240.04,0964,09432 split →
/21255.255.248.02,0482,04664 split →
/22255.255.252.01,0241,022128 split →
/23255.255.254.0512510256 split →
/24255.255.255.0256254512 split →
/25255.255.255.1281281261,024 split →
/26255.255.255.19264622,048 split →
/27255.255.255.22432304,096 split →
/28255.255.255.24016148,192 split →
/29255.255.255.2488616,384 split →
/30255.255.255.2524232,768 split →
/31255.255.255.2542265,536 split →
/32255.255.255.25511131,072 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →