ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.26.96.0/19
network10.26.96.0/19
broadcast10.26.127.255
first host10.26.96.1
last host10.26.127.254
subnet mask255.255.224.0
wildcard0.0.31.255
addresses8,192
usable hosts8,190
classA
ipcalc 10.26.96.0/19
address00001010.00011010.01100000.00000000
subnet mask11111111.11111111.11100000.00000000
network00001010.00011010.01100000.00000000
broadcast00001010.00011010.01111111.11111111
green = network part, grey = host part
hex0x0a1a6000
decimal169500672
reverse dns0.96.26.10.in-addr.arpa
ipv4-mapped::ffff:a1a:6000

/19 split into /25 · 64 subnets

close ×
#networkhost rangebroadcast
110.26.96.0/2510.26.96.1 – 10.26.96.12610.26.96.127
210.26.96.128/2510.26.96.129 – 10.26.96.25410.26.96.255
310.26.97.0/2510.26.97.1 – 10.26.97.12610.26.97.127
410.26.97.128/2510.26.97.129 – 10.26.97.25410.26.97.255
510.26.98.0/2510.26.98.1 – 10.26.98.12610.26.98.127
610.26.98.128/2510.26.98.129 – 10.26.98.25410.26.98.255
710.26.99.0/2510.26.99.1 – 10.26.99.12610.26.99.127
810.26.99.128/2510.26.99.129 – 10.26.99.25410.26.99.255
910.26.100.0/2510.26.100.1 – 10.26.100.12610.26.100.127
1010.26.100.128/2510.26.100.129 – 10.26.100.25410.26.100.255
1110.26.101.0/2510.26.101.1 – 10.26.101.12610.26.101.127
1210.26.101.128/2510.26.101.129 – 10.26.101.25410.26.101.255
1310.26.102.0/2510.26.102.1 – 10.26.102.12610.26.102.127
1410.26.102.128/2510.26.102.129 – 10.26.102.25410.26.102.255
1510.26.103.0/2510.26.103.1 – 10.26.103.12610.26.103.127
1610.26.103.128/2510.26.103.129 – 10.26.103.25410.26.103.255
1710.26.104.0/2510.26.104.1 – 10.26.104.12610.26.104.127
1810.26.104.128/2510.26.104.129 – 10.26.104.25410.26.104.255
1910.26.105.0/2510.26.105.1 – 10.26.105.12610.26.105.127
2010.26.105.128/2510.26.105.129 – 10.26.105.25410.26.105.255
2110.26.106.0/2510.26.106.1 – 10.26.106.12610.26.106.127
2210.26.106.128/2510.26.106.129 – 10.26.106.25410.26.106.255
2310.26.107.0/2510.26.107.1 – 10.26.107.12610.26.107.127
2410.26.107.128/2510.26.107.129 – 10.26.107.25410.26.107.255
2510.26.108.0/2510.26.108.1 – 10.26.108.12610.26.108.127
2610.26.108.128/2510.26.108.129 – 10.26.108.25410.26.108.255
2710.26.109.0/2510.26.109.1 – 10.26.109.12610.26.109.127
2810.26.109.128/2510.26.109.129 – 10.26.109.25410.26.109.255
2910.26.110.0/2510.26.110.1 – 10.26.110.12610.26.110.127
3010.26.110.128/2510.26.110.129 – 10.26.110.25410.26.110.255
3110.26.111.0/2510.26.111.1 – 10.26.111.12610.26.111.127
3210.26.111.128/2510.26.111.129 – 10.26.111.25410.26.111.255
3310.26.112.0/2510.26.112.1 – 10.26.112.12610.26.112.127
3410.26.112.128/2510.26.112.129 – 10.26.112.25410.26.112.255
3510.26.113.0/2510.26.113.1 – 10.26.113.12610.26.113.127
3610.26.113.128/2510.26.113.129 – 10.26.113.25410.26.113.255
3710.26.114.0/2510.26.114.1 – 10.26.114.12610.26.114.127
3810.26.114.128/2510.26.114.129 – 10.26.114.25410.26.114.255
3910.26.115.0/2510.26.115.1 – 10.26.115.12610.26.115.127
4010.26.115.128/2510.26.115.129 – 10.26.115.25410.26.115.255
4110.26.116.0/2510.26.116.1 – 10.26.116.12610.26.116.127
4210.26.116.128/2510.26.116.129 – 10.26.116.25410.26.116.255
4310.26.117.0/2510.26.117.1 – 10.26.117.12610.26.117.127
4410.26.117.128/2510.26.117.129 – 10.26.117.25410.26.117.255
4510.26.118.0/2510.26.118.1 – 10.26.118.12610.26.118.127
4610.26.118.128/2510.26.118.129 – 10.26.118.25410.26.118.255
4710.26.119.0/2510.26.119.1 – 10.26.119.12610.26.119.127
4810.26.119.128/2510.26.119.129 – 10.26.119.25410.26.119.255
4910.26.120.0/2510.26.120.1 – 10.26.120.12610.26.120.127
5010.26.120.128/2510.26.120.129 – 10.26.120.25410.26.120.255
5110.26.121.0/2510.26.121.1 – 10.26.121.12610.26.121.127
5210.26.121.128/2510.26.121.129 – 10.26.121.25410.26.121.255
5310.26.122.0/2510.26.122.1 – 10.26.122.12610.26.122.127
5410.26.122.128/2510.26.122.129 – 10.26.122.25410.26.122.255
5510.26.123.0/2510.26.123.1 – 10.26.123.12610.26.123.127
5610.26.123.128/2510.26.123.129 – 10.26.123.25410.26.123.255
5710.26.124.0/2510.26.124.1 – 10.26.124.12610.26.124.127
5810.26.124.128/2510.26.124.129 – 10.26.124.25410.26.124.255
5910.26.125.0/2510.26.125.1 – 10.26.125.12610.26.125.127
6010.26.125.128/2510.26.125.129 – 10.26.125.25410.26.125.255
6110.26.126.0/2510.26.126.1 – 10.26.126.12610.26.126.127
6210.26.126.128/2510.26.126.129 – 10.26.126.25410.26.126.255
6310.26.127.0/2510.26.127.1 – 10.26.127.12610.26.127.127
6410.26.127.128/2510.26.127.129 – 10.26.127.25410.26.127.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /19
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,1901
/20255.255.240.04,0964,0942 split →
/21255.255.248.02,0482,0464 split →
/22255.255.252.01,0241,0228 split →
/23255.255.254.051251016 split →
/24255.255.255.025625432 split →
/25255.255.255.12812812664 split →
/26255.255.255.1926462128 split →
/27255.255.255.2243230256 split →
/28255.255.255.2401614512 split →
/29255.255.255.248861,024 split →
/30255.255.255.252422,048 split →
/31255.255.255.254224,096 split →
/32255.255.255.255118,192 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →