ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.26.96.0/19
network10.26.96.0/19
broadcast10.26.127.255
first host10.26.96.1
last host10.26.127.254
subnet mask255.255.224.0
wildcard0.0.31.255
addresses8,192
usable hosts8,190
classA
ipcalc 10.26.96.0/19
address00001010.00011010.01100000.00000000
subnet mask11111111.11111111.11100000.00000000
network00001010.00011010.01100000.00000000
broadcast00001010.00011010.01111111.11111111
green = network part, grey = host part
hex0x0a1a6000
decimal169500672
reverse dns0.96.26.10.in-addr.arpa
ipv4-mapped::ffff:a1a:6000

/19 split into /24 · 32 subnets

close ×
#networkhost rangebroadcast
110.26.96.0/2410.26.96.1 – 10.26.96.25410.26.96.255
210.26.97.0/2410.26.97.1 – 10.26.97.25410.26.97.255
310.26.98.0/2410.26.98.1 – 10.26.98.25410.26.98.255
410.26.99.0/2410.26.99.1 – 10.26.99.25410.26.99.255
510.26.100.0/2410.26.100.1 – 10.26.100.25410.26.100.255
610.26.101.0/2410.26.101.1 – 10.26.101.25410.26.101.255
710.26.102.0/2410.26.102.1 – 10.26.102.25410.26.102.255
810.26.103.0/2410.26.103.1 – 10.26.103.25410.26.103.255
910.26.104.0/2410.26.104.1 – 10.26.104.25410.26.104.255
1010.26.105.0/2410.26.105.1 – 10.26.105.25410.26.105.255
1110.26.106.0/2410.26.106.1 – 10.26.106.25410.26.106.255
1210.26.107.0/2410.26.107.1 – 10.26.107.25410.26.107.255
1310.26.108.0/2410.26.108.1 – 10.26.108.25410.26.108.255
1410.26.109.0/2410.26.109.1 – 10.26.109.25410.26.109.255
1510.26.110.0/2410.26.110.1 – 10.26.110.25410.26.110.255
1610.26.111.0/2410.26.111.1 – 10.26.111.25410.26.111.255
1710.26.112.0/2410.26.112.1 – 10.26.112.25410.26.112.255
1810.26.113.0/2410.26.113.1 – 10.26.113.25410.26.113.255
1910.26.114.0/2410.26.114.1 – 10.26.114.25410.26.114.255
2010.26.115.0/2410.26.115.1 – 10.26.115.25410.26.115.255
2110.26.116.0/2410.26.116.1 – 10.26.116.25410.26.116.255
2210.26.117.0/2410.26.117.1 – 10.26.117.25410.26.117.255
2310.26.118.0/2410.26.118.1 – 10.26.118.25410.26.118.255
2410.26.119.0/2410.26.119.1 – 10.26.119.25410.26.119.255
2510.26.120.0/2410.26.120.1 – 10.26.120.25410.26.120.255
2610.26.121.0/2410.26.121.1 – 10.26.121.25410.26.121.255
2710.26.122.0/2410.26.122.1 – 10.26.122.25410.26.122.255
2810.26.123.0/2410.26.123.1 – 10.26.123.25410.26.123.255
2910.26.124.0/2410.26.124.1 – 10.26.124.25410.26.124.255
3010.26.125.0/2410.26.125.1 – 10.26.125.25410.26.125.255
3110.26.126.0/2410.26.126.1 – 10.26.126.25410.26.126.255
3210.26.127.0/2410.26.127.1 – 10.26.127.25410.26.127.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /19
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,1901
/20255.255.240.04,0964,0942 split →
/21255.255.248.02,0482,0464 split →
/22255.255.252.01,0241,0228 split →
/23255.255.254.051251016 split →
/24255.255.255.025625432 split →
/25255.255.255.12812812664 split →
/26255.255.255.1926462128 split →
/27255.255.255.2243230256 split →
/28255.255.255.2401614512 split →
/29255.255.255.248861,024 split →
/30255.255.255.252422,048 split →
/31255.255.255.254224,096 split →
/32255.255.255.255118,192 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →