ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.26.85.64/27
network10.26.85.64/27
broadcast10.26.85.95
first host10.26.85.65
last host10.26.85.94
subnet mask255.255.255.224
wildcard0.0.0.31
addresses32
usable hosts30
classA
ipcalc 10.26.85.64/27
address00001010.00011010.01010101.01000000
subnet mask11111111.11111111.11111111.11100000
network00001010.00011010.01010101.01000000
broadcast00001010.00011010.01010101.01011111
green = network part, grey = host part
hex0x0a1a5540
decimal169497920
reverse dns64.85.26.10.in-addr.arpa
ipv4-mapped::ffff:a1a:5540

/27 split into /32 · 32 subnets

close ×
#networkhost rangebroadcast
110.26.85.64/3210.26.85.64 – 10.26.85.6410.26.85.64
210.26.85.65/3210.26.85.65 – 10.26.85.6510.26.85.65
310.26.85.66/3210.26.85.66 – 10.26.85.6610.26.85.66
410.26.85.67/3210.26.85.67 – 10.26.85.6710.26.85.67
510.26.85.68/3210.26.85.68 – 10.26.85.6810.26.85.68
610.26.85.69/3210.26.85.69 – 10.26.85.6910.26.85.69
710.26.85.70/3210.26.85.70 – 10.26.85.7010.26.85.70
810.26.85.71/3210.26.85.71 – 10.26.85.7110.26.85.71
910.26.85.72/3210.26.85.72 – 10.26.85.7210.26.85.72
1010.26.85.73/3210.26.85.73 – 10.26.85.7310.26.85.73
1110.26.85.74/3210.26.85.74 – 10.26.85.7410.26.85.74
1210.26.85.75/3210.26.85.75 – 10.26.85.7510.26.85.75
1310.26.85.76/3210.26.85.76 – 10.26.85.7610.26.85.76
1410.26.85.77/3210.26.85.77 – 10.26.85.7710.26.85.77
1510.26.85.78/3210.26.85.78 – 10.26.85.7810.26.85.78
1610.26.85.79/3210.26.85.79 – 10.26.85.7910.26.85.79
1710.26.85.80/3210.26.85.80 – 10.26.85.8010.26.85.80
1810.26.85.81/3210.26.85.81 – 10.26.85.8110.26.85.81
1910.26.85.82/3210.26.85.82 – 10.26.85.8210.26.85.82
2010.26.85.83/3210.26.85.83 – 10.26.85.8310.26.85.83
2110.26.85.84/3210.26.85.84 – 10.26.85.8410.26.85.84
2210.26.85.85/3210.26.85.85 – 10.26.85.8510.26.85.85
2310.26.85.86/3210.26.85.86 – 10.26.85.8610.26.85.86
2410.26.85.87/3210.26.85.87 – 10.26.85.8710.26.85.87
2510.26.85.88/3210.26.85.88 – 10.26.85.8810.26.85.88
2610.26.85.89/3210.26.85.89 – 10.26.85.8910.26.85.89
2710.26.85.90/3210.26.85.90 – 10.26.85.9010.26.85.90
2810.26.85.91/3210.26.85.91 – 10.26.85.9110.26.85.91
2910.26.85.92/3210.26.85.92 – 10.26.85.9210.26.85.92
3010.26.85.93/3210.26.85.93 – 10.26.85.9310.26.85.93
3110.26.85.94/3210.26.85.94 – 10.26.85.9410.26.85.94
3210.26.85.95/3210.26.85.95 – 10.26.85.9510.26.85.95
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /27
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.1926462-
/27255.255.255.22432301
/28255.255.255.24016142 split →
/29255.255.255.248864 split →
/30255.255.255.252428 split →
/31255.255.255.2542216 split →
/32255.255.255.2551132 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →