ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.26.232.0/21
network10.26.232.0/21
broadcast10.26.239.255
first host10.26.232.1
last host10.26.239.254
subnet mask255.255.248.0
wildcard0.0.7.255
addresses2,048
usable hosts2,046
classA
ipcalc 10.26.232.0/21
address00001010.00011010.11101000.00000000
subnet mask11111111.11111111.11111000.00000000
network00001010.00011010.11101000.00000000
broadcast00001010.00011010.11101111.11111111
green = network part, grey = host part
hex0x0a1ae800
decimal169535488
reverse dns0.232.26.10.in-addr.arpa
ipv4-mapped::ffff:a1a:e800

/21 split into /26 · 32 subnets

close ×
#networkhost rangebroadcast
110.26.232.0/2610.26.232.1 – 10.26.232.6210.26.232.63
210.26.232.64/2610.26.232.65 – 10.26.232.12610.26.232.127
310.26.232.128/2610.26.232.129 – 10.26.232.19010.26.232.191
410.26.232.192/2610.26.232.193 – 10.26.232.25410.26.232.255
510.26.233.0/2610.26.233.1 – 10.26.233.6210.26.233.63
610.26.233.64/2610.26.233.65 – 10.26.233.12610.26.233.127
710.26.233.128/2610.26.233.129 – 10.26.233.19010.26.233.191
810.26.233.192/2610.26.233.193 – 10.26.233.25410.26.233.255
910.26.234.0/2610.26.234.1 – 10.26.234.6210.26.234.63
1010.26.234.64/2610.26.234.65 – 10.26.234.12610.26.234.127
1110.26.234.128/2610.26.234.129 – 10.26.234.19010.26.234.191
1210.26.234.192/2610.26.234.193 – 10.26.234.25410.26.234.255
1310.26.235.0/2610.26.235.1 – 10.26.235.6210.26.235.63
1410.26.235.64/2610.26.235.65 – 10.26.235.12610.26.235.127
1510.26.235.128/2610.26.235.129 – 10.26.235.19010.26.235.191
1610.26.235.192/2610.26.235.193 – 10.26.235.25410.26.235.255
1710.26.236.0/2610.26.236.1 – 10.26.236.6210.26.236.63
1810.26.236.64/2610.26.236.65 – 10.26.236.12610.26.236.127
1910.26.236.128/2610.26.236.129 – 10.26.236.19010.26.236.191
2010.26.236.192/2610.26.236.193 – 10.26.236.25410.26.236.255
2110.26.237.0/2610.26.237.1 – 10.26.237.6210.26.237.63
2210.26.237.64/2610.26.237.65 – 10.26.237.12610.26.237.127
2310.26.237.128/2610.26.237.129 – 10.26.237.19010.26.237.191
2410.26.237.192/2610.26.237.193 – 10.26.237.25410.26.237.255
2510.26.238.0/2610.26.238.1 – 10.26.238.6210.26.238.63
2610.26.238.64/2610.26.238.65 – 10.26.238.12610.26.238.127
2710.26.238.128/2610.26.238.129 – 10.26.238.19010.26.238.191
2810.26.238.192/2610.26.238.193 – 10.26.238.25410.26.238.255
2910.26.239.0/2610.26.239.1 – 10.26.239.6210.26.239.63
3010.26.239.64/2610.26.239.65 – 10.26.239.12610.26.239.127
3110.26.239.128/2610.26.239.129 – 10.26.239.19010.26.239.191
3210.26.239.192/2610.26.239.193 – 10.26.239.25410.26.239.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /21
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,0461
/22255.255.252.01,0241,0222 split →
/23255.255.254.05125104 split →
/24255.255.255.02562548 split →
/25255.255.255.12812812616 split →
/26255.255.255.192646232 split →
/27255.255.255.224323064 split →
/28255.255.255.2401614128 split →
/29255.255.255.24886256 split →
/30255.255.255.25242512 split →
/31255.255.255.254221,024 split →
/32255.255.255.255112,048 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →