ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.252.78.0/24
network10.252.78.0/24
broadcast10.252.78.255
first host10.252.78.1
last host10.252.78.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.252.78.0/24
address00001010.11111100.01001110.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.11111100.01001110.00000000
broadcast00001010.11111100.01001110.11111111
green = network part, grey = host part
hex0x0afc4e00
decimal184307200
reverse dns0.78.252.10.in-addr.arpa
ipv4-mapped::ffff:afc:4e00

/24 split into /29 · 32 subnets

close ×
#networkhost rangebroadcast
110.252.78.0/2910.252.78.1 – 10.252.78.610.252.78.7
210.252.78.8/2910.252.78.9 – 10.252.78.1410.252.78.15
310.252.78.16/2910.252.78.17 – 10.252.78.2210.252.78.23
410.252.78.24/2910.252.78.25 – 10.252.78.3010.252.78.31
510.252.78.32/2910.252.78.33 – 10.252.78.3810.252.78.39
610.252.78.40/2910.252.78.41 – 10.252.78.4610.252.78.47
710.252.78.48/2910.252.78.49 – 10.252.78.5410.252.78.55
810.252.78.56/2910.252.78.57 – 10.252.78.6210.252.78.63
910.252.78.64/2910.252.78.65 – 10.252.78.7010.252.78.71
1010.252.78.72/2910.252.78.73 – 10.252.78.7810.252.78.79
1110.252.78.80/2910.252.78.81 – 10.252.78.8610.252.78.87
1210.252.78.88/2910.252.78.89 – 10.252.78.9410.252.78.95
1310.252.78.96/2910.252.78.97 – 10.252.78.10210.252.78.103
1410.252.78.104/2910.252.78.105 – 10.252.78.11010.252.78.111
1510.252.78.112/2910.252.78.113 – 10.252.78.11810.252.78.119
1610.252.78.120/2910.252.78.121 – 10.252.78.12610.252.78.127
1710.252.78.128/2910.252.78.129 – 10.252.78.13410.252.78.135
1810.252.78.136/2910.252.78.137 – 10.252.78.14210.252.78.143
1910.252.78.144/2910.252.78.145 – 10.252.78.15010.252.78.151
2010.252.78.152/2910.252.78.153 – 10.252.78.15810.252.78.159
2110.252.78.160/2910.252.78.161 – 10.252.78.16610.252.78.167
2210.252.78.168/2910.252.78.169 – 10.252.78.17410.252.78.175
2310.252.78.176/2910.252.78.177 – 10.252.78.18210.252.78.183
2410.252.78.184/2910.252.78.185 – 10.252.78.19010.252.78.191
2510.252.78.192/2910.252.78.193 – 10.252.78.19810.252.78.199
2610.252.78.200/2910.252.78.201 – 10.252.78.20610.252.78.207
2710.252.78.208/2910.252.78.209 – 10.252.78.21410.252.78.215
2810.252.78.216/2910.252.78.217 – 10.252.78.22210.252.78.223
2910.252.78.224/2910.252.78.225 – 10.252.78.23010.252.78.231
3010.252.78.232/2910.252.78.233 – 10.252.78.23810.252.78.239
3110.252.78.240/2910.252.78.241 – 10.252.78.24610.252.78.247
3210.252.78.248/2910.252.78.249 – 10.252.78.25410.252.78.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →