ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.239.8.0/22
network10.239.8.0/22
broadcast10.239.11.255
first host10.239.8.1
last host10.239.11.254
subnet mask255.255.252.0
wildcard0.0.3.255
addresses1,024
usable hosts1,022
classA
ipcalc 10.239.8.0/22
address00001010.11101111.00001000.00000000
subnet mask11111111.11111111.11111100.00000000
network00001010.11101111.00001000.00000000
broadcast00001010.11101111.00001011.11111111
green = network part, grey = host part
hex0x0aef0800
decimal183437312
reverse dns0.8.239.10.in-addr.arpa
ipv4-mapped::ffff:aef:800

/22 split into /27 · 32 subnets

close ×
#networkhost rangebroadcast
110.239.8.0/2710.239.8.1 – 10.239.8.3010.239.8.31
210.239.8.32/2710.239.8.33 – 10.239.8.6210.239.8.63
310.239.8.64/2710.239.8.65 – 10.239.8.9410.239.8.95
410.239.8.96/2710.239.8.97 – 10.239.8.12610.239.8.127
510.239.8.128/2710.239.8.129 – 10.239.8.15810.239.8.159
610.239.8.160/2710.239.8.161 – 10.239.8.19010.239.8.191
710.239.8.192/2710.239.8.193 – 10.239.8.22210.239.8.223
810.239.8.224/2710.239.8.225 – 10.239.8.25410.239.8.255
910.239.9.0/2710.239.9.1 – 10.239.9.3010.239.9.31
1010.239.9.32/2710.239.9.33 – 10.239.9.6210.239.9.63
1110.239.9.64/2710.239.9.65 – 10.239.9.9410.239.9.95
1210.239.9.96/2710.239.9.97 – 10.239.9.12610.239.9.127
1310.239.9.128/2710.239.9.129 – 10.239.9.15810.239.9.159
1410.239.9.160/2710.239.9.161 – 10.239.9.19010.239.9.191
1510.239.9.192/2710.239.9.193 – 10.239.9.22210.239.9.223
1610.239.9.224/2710.239.9.225 – 10.239.9.25410.239.9.255
1710.239.10.0/2710.239.10.1 – 10.239.10.3010.239.10.31
1810.239.10.32/2710.239.10.33 – 10.239.10.6210.239.10.63
1910.239.10.64/2710.239.10.65 – 10.239.10.9410.239.10.95
2010.239.10.96/2710.239.10.97 – 10.239.10.12610.239.10.127
2110.239.10.128/2710.239.10.129 – 10.239.10.15810.239.10.159
2210.239.10.160/2710.239.10.161 – 10.239.10.19010.239.10.191
2310.239.10.192/2710.239.10.193 – 10.239.10.22210.239.10.223
2410.239.10.224/2710.239.10.225 – 10.239.10.25410.239.10.255
2510.239.11.0/2710.239.11.1 – 10.239.11.3010.239.11.31
2610.239.11.32/2710.239.11.33 – 10.239.11.6210.239.11.63
2710.239.11.64/2710.239.11.65 – 10.239.11.9410.239.11.95
2810.239.11.96/2710.239.11.97 – 10.239.11.12610.239.11.127
2910.239.11.128/2710.239.11.129 – 10.239.11.15810.239.11.159
3010.239.11.160/2710.239.11.161 – 10.239.11.19010.239.11.191
3110.239.11.192/2710.239.11.193 – 10.239.11.22210.239.11.223
3210.239.11.224/2710.239.11.225 – 10.239.11.25410.239.11.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /22
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,0221
/23255.255.254.05125102 split →
/24255.255.255.02562544 split →
/25255.255.255.1281281268 split →
/26255.255.255.192646216 split →
/27255.255.255.224323032 split →
/28255.255.255.240161464 split →
/29255.255.255.24886128 split →
/30255.255.255.25242256 split →
/31255.255.255.25422512 split →
/32255.255.255.255111,024 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →