ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.239.41.0/24
network10.239.41.0/24
broadcast10.239.41.255
first host10.239.41.1
last host10.239.41.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.239.41.0/24
address00001010.11101111.00101001.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.11101111.00101001.00000000
broadcast00001010.11101111.00101001.11111111
green = network part, grey = host part
hex0x0aef2900
decimal183445760
reverse dns0.41.239.10.in-addr.arpa
ipv4-mapped::ffff:aef:2900

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.239.41.0/3010.239.41.1 – 10.239.41.210.239.41.3
210.239.41.4/3010.239.41.5 – 10.239.41.610.239.41.7
310.239.41.8/3010.239.41.9 – 10.239.41.1010.239.41.11
410.239.41.12/3010.239.41.13 – 10.239.41.1410.239.41.15
510.239.41.16/3010.239.41.17 – 10.239.41.1810.239.41.19
610.239.41.20/3010.239.41.21 – 10.239.41.2210.239.41.23
710.239.41.24/3010.239.41.25 – 10.239.41.2610.239.41.27
810.239.41.28/3010.239.41.29 – 10.239.41.3010.239.41.31
910.239.41.32/3010.239.41.33 – 10.239.41.3410.239.41.35
1010.239.41.36/3010.239.41.37 – 10.239.41.3810.239.41.39
1110.239.41.40/3010.239.41.41 – 10.239.41.4210.239.41.43
1210.239.41.44/3010.239.41.45 – 10.239.41.4610.239.41.47
1310.239.41.48/3010.239.41.49 – 10.239.41.5010.239.41.51
1410.239.41.52/3010.239.41.53 – 10.239.41.5410.239.41.55
1510.239.41.56/3010.239.41.57 – 10.239.41.5810.239.41.59
1610.239.41.60/3010.239.41.61 – 10.239.41.6210.239.41.63
1710.239.41.64/3010.239.41.65 – 10.239.41.6610.239.41.67
1810.239.41.68/3010.239.41.69 – 10.239.41.7010.239.41.71
1910.239.41.72/3010.239.41.73 – 10.239.41.7410.239.41.75
2010.239.41.76/3010.239.41.77 – 10.239.41.7810.239.41.79
2110.239.41.80/3010.239.41.81 – 10.239.41.8210.239.41.83
2210.239.41.84/3010.239.41.85 – 10.239.41.8610.239.41.87
2310.239.41.88/3010.239.41.89 – 10.239.41.9010.239.41.91
2410.239.41.92/3010.239.41.93 – 10.239.41.9410.239.41.95
2510.239.41.96/3010.239.41.97 – 10.239.41.9810.239.41.99
2610.239.41.100/3010.239.41.101 – 10.239.41.10210.239.41.103
2710.239.41.104/3010.239.41.105 – 10.239.41.10610.239.41.107
2810.239.41.108/3010.239.41.109 – 10.239.41.11010.239.41.111
2910.239.41.112/3010.239.41.113 – 10.239.41.11410.239.41.115
3010.239.41.116/3010.239.41.117 – 10.239.41.11810.239.41.119
3110.239.41.120/3010.239.41.121 – 10.239.41.12210.239.41.123
3210.239.41.124/3010.239.41.125 – 10.239.41.12610.239.41.127
3310.239.41.128/3010.239.41.129 – 10.239.41.13010.239.41.131
3410.239.41.132/3010.239.41.133 – 10.239.41.13410.239.41.135
3510.239.41.136/3010.239.41.137 – 10.239.41.13810.239.41.139
3610.239.41.140/3010.239.41.141 – 10.239.41.14210.239.41.143
3710.239.41.144/3010.239.41.145 – 10.239.41.14610.239.41.147
3810.239.41.148/3010.239.41.149 – 10.239.41.15010.239.41.151
3910.239.41.152/3010.239.41.153 – 10.239.41.15410.239.41.155
4010.239.41.156/3010.239.41.157 – 10.239.41.15810.239.41.159
4110.239.41.160/3010.239.41.161 – 10.239.41.16210.239.41.163
4210.239.41.164/3010.239.41.165 – 10.239.41.16610.239.41.167
4310.239.41.168/3010.239.41.169 – 10.239.41.17010.239.41.171
4410.239.41.172/3010.239.41.173 – 10.239.41.17410.239.41.175
4510.239.41.176/3010.239.41.177 – 10.239.41.17810.239.41.179
4610.239.41.180/3010.239.41.181 – 10.239.41.18210.239.41.183
4710.239.41.184/3010.239.41.185 – 10.239.41.18610.239.41.187
4810.239.41.188/3010.239.41.189 – 10.239.41.19010.239.41.191
4910.239.41.192/3010.239.41.193 – 10.239.41.19410.239.41.195
5010.239.41.196/3010.239.41.197 – 10.239.41.19810.239.41.199
5110.239.41.200/3010.239.41.201 – 10.239.41.20210.239.41.203
5210.239.41.204/3010.239.41.205 – 10.239.41.20610.239.41.207
5310.239.41.208/3010.239.41.209 – 10.239.41.21010.239.41.211
5410.239.41.212/3010.239.41.213 – 10.239.41.21410.239.41.215
5510.239.41.216/3010.239.41.217 – 10.239.41.21810.239.41.219
5610.239.41.220/3010.239.41.221 – 10.239.41.22210.239.41.223
5710.239.41.224/3010.239.41.225 – 10.239.41.22610.239.41.227
5810.239.41.228/3010.239.41.229 – 10.239.41.23010.239.41.231
5910.239.41.232/3010.239.41.233 – 10.239.41.23410.239.41.235
6010.239.41.236/3010.239.41.237 – 10.239.41.23810.239.41.239
6110.239.41.240/3010.239.41.241 – 10.239.41.24210.239.41.243
6210.239.41.244/3010.239.41.245 – 10.239.41.24610.239.41.247
6310.239.41.248/3010.239.41.249 – 10.239.41.25010.239.41.251
6410.239.41.252/3010.239.41.253 – 10.239.41.25410.239.41.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →