ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.232.76.192/27
network10.232.76.192/27
broadcast10.232.76.223
first host10.232.76.193
last host10.232.76.222
subnet mask255.255.255.224
wildcard0.0.0.31
addresses32
usable hosts30
classA
ipcalc 10.232.76.192/27
address00001010.11101000.01001100.11000000
subnet mask11111111.11111111.11111111.11100000
network00001010.11101000.01001100.11000000
broadcast00001010.11101000.01001100.11011111
green = network part, grey = host part
hex0x0ae84cc0
decimal182996160
reverse dns192.76.232.10.in-addr.arpa
ipv4-mapped::ffff:ae8:4cc0

/27 split into /32 · 32 subnets

close ×
#networkhost rangebroadcast
110.232.76.192/3210.232.76.192 – 10.232.76.19210.232.76.192
210.232.76.193/3210.232.76.193 – 10.232.76.19310.232.76.193
310.232.76.194/3210.232.76.194 – 10.232.76.19410.232.76.194
410.232.76.195/3210.232.76.195 – 10.232.76.19510.232.76.195
510.232.76.196/3210.232.76.196 – 10.232.76.19610.232.76.196
610.232.76.197/3210.232.76.197 – 10.232.76.19710.232.76.197
710.232.76.198/3210.232.76.198 – 10.232.76.19810.232.76.198
810.232.76.199/3210.232.76.199 – 10.232.76.19910.232.76.199
910.232.76.200/3210.232.76.200 – 10.232.76.20010.232.76.200
1010.232.76.201/3210.232.76.201 – 10.232.76.20110.232.76.201
1110.232.76.202/3210.232.76.202 – 10.232.76.20210.232.76.202
1210.232.76.203/3210.232.76.203 – 10.232.76.20310.232.76.203
1310.232.76.204/3210.232.76.204 – 10.232.76.20410.232.76.204
1410.232.76.205/3210.232.76.205 – 10.232.76.20510.232.76.205
1510.232.76.206/3210.232.76.206 – 10.232.76.20610.232.76.206
1610.232.76.207/3210.232.76.207 – 10.232.76.20710.232.76.207
1710.232.76.208/3210.232.76.208 – 10.232.76.20810.232.76.208
1810.232.76.209/3210.232.76.209 – 10.232.76.20910.232.76.209
1910.232.76.210/3210.232.76.210 – 10.232.76.21010.232.76.210
2010.232.76.211/3210.232.76.211 – 10.232.76.21110.232.76.211
2110.232.76.212/3210.232.76.212 – 10.232.76.21210.232.76.212
2210.232.76.213/3210.232.76.213 – 10.232.76.21310.232.76.213
2310.232.76.214/3210.232.76.214 – 10.232.76.21410.232.76.214
2410.232.76.215/3210.232.76.215 – 10.232.76.21510.232.76.215
2510.232.76.216/3210.232.76.216 – 10.232.76.21610.232.76.216
2610.232.76.217/3210.232.76.217 – 10.232.76.21710.232.76.217
2710.232.76.218/3210.232.76.218 – 10.232.76.21810.232.76.218
2810.232.76.219/3210.232.76.219 – 10.232.76.21910.232.76.219
2910.232.76.220/3210.232.76.220 – 10.232.76.22010.232.76.220
3010.232.76.221/3210.232.76.221 – 10.232.76.22110.232.76.221
3110.232.76.222/3210.232.76.222 – 10.232.76.22210.232.76.222
3210.232.76.223/3210.232.76.223 – 10.232.76.22310.232.76.223
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /27
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.1926462-
/27255.255.255.22432301
/28255.255.255.24016142 split →
/29255.255.255.248864 split →
/30255.255.255.252428 split →
/31255.255.255.2542216 split →
/32255.255.255.2551132 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →