ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.232.63.0/24
network10.232.63.0/24
broadcast10.232.63.255
first host10.232.63.1
last host10.232.63.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.232.63.0/24
address00001010.11101000.00111111.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.11101000.00111111.00000000
broadcast00001010.11101000.00111111.11111111
green = network part, grey = host part
hex0x0ae83f00
decimal182992640
reverse dns0.63.232.10.in-addr.arpa
ipv4-mapped::ffff:ae8:3f00

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.232.63.0/3010.232.63.1 – 10.232.63.210.232.63.3
210.232.63.4/3010.232.63.5 – 10.232.63.610.232.63.7
310.232.63.8/3010.232.63.9 – 10.232.63.1010.232.63.11
410.232.63.12/3010.232.63.13 – 10.232.63.1410.232.63.15
510.232.63.16/3010.232.63.17 – 10.232.63.1810.232.63.19
610.232.63.20/3010.232.63.21 – 10.232.63.2210.232.63.23
710.232.63.24/3010.232.63.25 – 10.232.63.2610.232.63.27
810.232.63.28/3010.232.63.29 – 10.232.63.3010.232.63.31
910.232.63.32/3010.232.63.33 – 10.232.63.3410.232.63.35
1010.232.63.36/3010.232.63.37 – 10.232.63.3810.232.63.39
1110.232.63.40/3010.232.63.41 – 10.232.63.4210.232.63.43
1210.232.63.44/3010.232.63.45 – 10.232.63.4610.232.63.47
1310.232.63.48/3010.232.63.49 – 10.232.63.5010.232.63.51
1410.232.63.52/3010.232.63.53 – 10.232.63.5410.232.63.55
1510.232.63.56/3010.232.63.57 – 10.232.63.5810.232.63.59
1610.232.63.60/3010.232.63.61 – 10.232.63.6210.232.63.63
1710.232.63.64/3010.232.63.65 – 10.232.63.6610.232.63.67
1810.232.63.68/3010.232.63.69 – 10.232.63.7010.232.63.71
1910.232.63.72/3010.232.63.73 – 10.232.63.7410.232.63.75
2010.232.63.76/3010.232.63.77 – 10.232.63.7810.232.63.79
2110.232.63.80/3010.232.63.81 – 10.232.63.8210.232.63.83
2210.232.63.84/3010.232.63.85 – 10.232.63.8610.232.63.87
2310.232.63.88/3010.232.63.89 – 10.232.63.9010.232.63.91
2410.232.63.92/3010.232.63.93 – 10.232.63.9410.232.63.95
2510.232.63.96/3010.232.63.97 – 10.232.63.9810.232.63.99
2610.232.63.100/3010.232.63.101 – 10.232.63.10210.232.63.103
2710.232.63.104/3010.232.63.105 – 10.232.63.10610.232.63.107
2810.232.63.108/3010.232.63.109 – 10.232.63.11010.232.63.111
2910.232.63.112/3010.232.63.113 – 10.232.63.11410.232.63.115
3010.232.63.116/3010.232.63.117 – 10.232.63.11810.232.63.119
3110.232.63.120/3010.232.63.121 – 10.232.63.12210.232.63.123
3210.232.63.124/3010.232.63.125 – 10.232.63.12610.232.63.127
3310.232.63.128/3010.232.63.129 – 10.232.63.13010.232.63.131
3410.232.63.132/3010.232.63.133 – 10.232.63.13410.232.63.135
3510.232.63.136/3010.232.63.137 – 10.232.63.13810.232.63.139
3610.232.63.140/3010.232.63.141 – 10.232.63.14210.232.63.143
3710.232.63.144/3010.232.63.145 – 10.232.63.14610.232.63.147
3810.232.63.148/3010.232.63.149 – 10.232.63.15010.232.63.151
3910.232.63.152/3010.232.63.153 – 10.232.63.15410.232.63.155
4010.232.63.156/3010.232.63.157 – 10.232.63.15810.232.63.159
4110.232.63.160/3010.232.63.161 – 10.232.63.16210.232.63.163
4210.232.63.164/3010.232.63.165 – 10.232.63.16610.232.63.167
4310.232.63.168/3010.232.63.169 – 10.232.63.17010.232.63.171
4410.232.63.172/3010.232.63.173 – 10.232.63.17410.232.63.175
4510.232.63.176/3010.232.63.177 – 10.232.63.17810.232.63.179
4610.232.63.180/3010.232.63.181 – 10.232.63.18210.232.63.183
4710.232.63.184/3010.232.63.185 – 10.232.63.18610.232.63.187
4810.232.63.188/3010.232.63.189 – 10.232.63.19010.232.63.191
4910.232.63.192/3010.232.63.193 – 10.232.63.19410.232.63.195
5010.232.63.196/3010.232.63.197 – 10.232.63.19810.232.63.199
5110.232.63.200/3010.232.63.201 – 10.232.63.20210.232.63.203
5210.232.63.204/3010.232.63.205 – 10.232.63.20610.232.63.207
5310.232.63.208/3010.232.63.209 – 10.232.63.21010.232.63.211
5410.232.63.212/3010.232.63.213 – 10.232.63.21410.232.63.215
5510.232.63.216/3010.232.63.217 – 10.232.63.21810.232.63.219
5610.232.63.220/3010.232.63.221 – 10.232.63.22210.232.63.223
5710.232.63.224/3010.232.63.225 – 10.232.63.22610.232.63.227
5810.232.63.228/3010.232.63.229 – 10.232.63.23010.232.63.231
5910.232.63.232/3010.232.63.233 – 10.232.63.23410.232.63.235
6010.232.63.236/3010.232.63.237 – 10.232.63.23810.232.63.239
6110.232.63.240/3010.232.63.241 – 10.232.63.24210.232.63.243
6210.232.63.244/3010.232.63.245 – 10.232.63.24610.232.63.247
6310.232.63.248/3010.232.63.249 – 10.232.63.25010.232.63.251
6410.232.63.252/3010.232.63.253 – 10.232.63.25410.232.63.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →