ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.232.53.0/24
network10.232.53.0/24
broadcast10.232.53.255
first host10.232.53.1
last host10.232.53.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.232.53.0/24
address00001010.11101000.00110101.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.11101000.00110101.00000000
broadcast00001010.11101000.00110101.11111111
green = network part, grey = host part
hex0x0ae83500
decimal182990080
reverse dns0.53.232.10.in-addr.arpa
ipv4-mapped::ffff:ae8:3500

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.232.53.0/3010.232.53.1 – 10.232.53.210.232.53.3
210.232.53.4/3010.232.53.5 – 10.232.53.610.232.53.7
310.232.53.8/3010.232.53.9 – 10.232.53.1010.232.53.11
410.232.53.12/3010.232.53.13 – 10.232.53.1410.232.53.15
510.232.53.16/3010.232.53.17 – 10.232.53.1810.232.53.19
610.232.53.20/3010.232.53.21 – 10.232.53.2210.232.53.23
710.232.53.24/3010.232.53.25 – 10.232.53.2610.232.53.27
810.232.53.28/3010.232.53.29 – 10.232.53.3010.232.53.31
910.232.53.32/3010.232.53.33 – 10.232.53.3410.232.53.35
1010.232.53.36/3010.232.53.37 – 10.232.53.3810.232.53.39
1110.232.53.40/3010.232.53.41 – 10.232.53.4210.232.53.43
1210.232.53.44/3010.232.53.45 – 10.232.53.4610.232.53.47
1310.232.53.48/3010.232.53.49 – 10.232.53.5010.232.53.51
1410.232.53.52/3010.232.53.53 – 10.232.53.5410.232.53.55
1510.232.53.56/3010.232.53.57 – 10.232.53.5810.232.53.59
1610.232.53.60/3010.232.53.61 – 10.232.53.6210.232.53.63
1710.232.53.64/3010.232.53.65 – 10.232.53.6610.232.53.67
1810.232.53.68/3010.232.53.69 – 10.232.53.7010.232.53.71
1910.232.53.72/3010.232.53.73 – 10.232.53.7410.232.53.75
2010.232.53.76/3010.232.53.77 – 10.232.53.7810.232.53.79
2110.232.53.80/3010.232.53.81 – 10.232.53.8210.232.53.83
2210.232.53.84/3010.232.53.85 – 10.232.53.8610.232.53.87
2310.232.53.88/3010.232.53.89 – 10.232.53.9010.232.53.91
2410.232.53.92/3010.232.53.93 – 10.232.53.9410.232.53.95
2510.232.53.96/3010.232.53.97 – 10.232.53.9810.232.53.99
2610.232.53.100/3010.232.53.101 – 10.232.53.10210.232.53.103
2710.232.53.104/3010.232.53.105 – 10.232.53.10610.232.53.107
2810.232.53.108/3010.232.53.109 – 10.232.53.11010.232.53.111
2910.232.53.112/3010.232.53.113 – 10.232.53.11410.232.53.115
3010.232.53.116/3010.232.53.117 – 10.232.53.11810.232.53.119
3110.232.53.120/3010.232.53.121 – 10.232.53.12210.232.53.123
3210.232.53.124/3010.232.53.125 – 10.232.53.12610.232.53.127
3310.232.53.128/3010.232.53.129 – 10.232.53.13010.232.53.131
3410.232.53.132/3010.232.53.133 – 10.232.53.13410.232.53.135
3510.232.53.136/3010.232.53.137 – 10.232.53.13810.232.53.139
3610.232.53.140/3010.232.53.141 – 10.232.53.14210.232.53.143
3710.232.53.144/3010.232.53.145 – 10.232.53.14610.232.53.147
3810.232.53.148/3010.232.53.149 – 10.232.53.15010.232.53.151
3910.232.53.152/3010.232.53.153 – 10.232.53.15410.232.53.155
4010.232.53.156/3010.232.53.157 – 10.232.53.15810.232.53.159
4110.232.53.160/3010.232.53.161 – 10.232.53.16210.232.53.163
4210.232.53.164/3010.232.53.165 – 10.232.53.16610.232.53.167
4310.232.53.168/3010.232.53.169 – 10.232.53.17010.232.53.171
4410.232.53.172/3010.232.53.173 – 10.232.53.17410.232.53.175
4510.232.53.176/3010.232.53.177 – 10.232.53.17810.232.53.179
4610.232.53.180/3010.232.53.181 – 10.232.53.18210.232.53.183
4710.232.53.184/3010.232.53.185 – 10.232.53.18610.232.53.187
4810.232.53.188/3010.232.53.189 – 10.232.53.19010.232.53.191
4910.232.53.192/3010.232.53.193 – 10.232.53.19410.232.53.195
5010.232.53.196/3010.232.53.197 – 10.232.53.19810.232.53.199
5110.232.53.200/3010.232.53.201 – 10.232.53.20210.232.53.203
5210.232.53.204/3010.232.53.205 – 10.232.53.20610.232.53.207
5310.232.53.208/3010.232.53.209 – 10.232.53.21010.232.53.211
5410.232.53.212/3010.232.53.213 – 10.232.53.21410.232.53.215
5510.232.53.216/3010.232.53.217 – 10.232.53.21810.232.53.219
5610.232.53.220/3010.232.53.221 – 10.232.53.22210.232.53.223
5710.232.53.224/3010.232.53.225 – 10.232.53.22610.232.53.227
5810.232.53.228/3010.232.53.229 – 10.232.53.23010.232.53.231
5910.232.53.232/3010.232.53.233 – 10.232.53.23410.232.53.235
6010.232.53.236/3010.232.53.237 – 10.232.53.23810.232.53.239
6110.232.53.240/3010.232.53.241 – 10.232.53.24210.232.53.243
6210.232.53.244/3010.232.53.245 – 10.232.53.24610.232.53.247
6310.232.53.248/3010.232.53.249 – 10.232.53.25010.232.53.251
6410.232.53.252/3010.232.53.253 – 10.232.53.25410.232.53.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →