ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.232.48.0/23
network10.232.48.0/23
broadcast10.232.49.255
first host10.232.48.1
last host10.232.49.254
subnet mask255.255.254.0
wildcard0.0.1.255
addresses512
usable hosts510
classA
ipcalc 10.232.48.0/23
address00001010.11101000.00110000.00000000
subnet mask11111111.11111111.11111110.00000000
network00001010.11101000.00110000.00000000
broadcast00001010.11101000.00110001.11111111
green = network part, grey = host part
hex0x0ae83000
decimal182988800
reverse dns0.48.232.10.in-addr.arpa
ipv4-mapped::ffff:ae8:3000

/23 split into /29 · 64 subnets

close ×
#networkhost rangebroadcast
110.232.48.0/2910.232.48.1 – 10.232.48.610.232.48.7
210.232.48.8/2910.232.48.9 – 10.232.48.1410.232.48.15
310.232.48.16/2910.232.48.17 – 10.232.48.2210.232.48.23
410.232.48.24/2910.232.48.25 – 10.232.48.3010.232.48.31
510.232.48.32/2910.232.48.33 – 10.232.48.3810.232.48.39
610.232.48.40/2910.232.48.41 – 10.232.48.4610.232.48.47
710.232.48.48/2910.232.48.49 – 10.232.48.5410.232.48.55
810.232.48.56/2910.232.48.57 – 10.232.48.6210.232.48.63
910.232.48.64/2910.232.48.65 – 10.232.48.7010.232.48.71
1010.232.48.72/2910.232.48.73 – 10.232.48.7810.232.48.79
1110.232.48.80/2910.232.48.81 – 10.232.48.8610.232.48.87
1210.232.48.88/2910.232.48.89 – 10.232.48.9410.232.48.95
1310.232.48.96/2910.232.48.97 – 10.232.48.10210.232.48.103
1410.232.48.104/2910.232.48.105 – 10.232.48.11010.232.48.111
1510.232.48.112/2910.232.48.113 – 10.232.48.11810.232.48.119
1610.232.48.120/2910.232.48.121 – 10.232.48.12610.232.48.127
1710.232.48.128/2910.232.48.129 – 10.232.48.13410.232.48.135
1810.232.48.136/2910.232.48.137 – 10.232.48.14210.232.48.143
1910.232.48.144/2910.232.48.145 – 10.232.48.15010.232.48.151
2010.232.48.152/2910.232.48.153 – 10.232.48.15810.232.48.159
2110.232.48.160/2910.232.48.161 – 10.232.48.16610.232.48.167
2210.232.48.168/2910.232.48.169 – 10.232.48.17410.232.48.175
2310.232.48.176/2910.232.48.177 – 10.232.48.18210.232.48.183
2410.232.48.184/2910.232.48.185 – 10.232.48.19010.232.48.191
2510.232.48.192/2910.232.48.193 – 10.232.48.19810.232.48.199
2610.232.48.200/2910.232.48.201 – 10.232.48.20610.232.48.207
2710.232.48.208/2910.232.48.209 – 10.232.48.21410.232.48.215
2810.232.48.216/2910.232.48.217 – 10.232.48.22210.232.48.223
2910.232.48.224/2910.232.48.225 – 10.232.48.23010.232.48.231
3010.232.48.232/2910.232.48.233 – 10.232.48.23810.232.48.239
3110.232.48.240/2910.232.48.241 – 10.232.48.24610.232.48.247
3210.232.48.248/2910.232.48.249 – 10.232.48.25410.232.48.255
3310.232.49.0/2910.232.49.1 – 10.232.49.610.232.49.7
3410.232.49.8/2910.232.49.9 – 10.232.49.1410.232.49.15
3510.232.49.16/2910.232.49.17 – 10.232.49.2210.232.49.23
3610.232.49.24/2910.232.49.25 – 10.232.49.3010.232.49.31
3710.232.49.32/2910.232.49.33 – 10.232.49.3810.232.49.39
3810.232.49.40/2910.232.49.41 – 10.232.49.4610.232.49.47
3910.232.49.48/2910.232.49.49 – 10.232.49.5410.232.49.55
4010.232.49.56/2910.232.49.57 – 10.232.49.6210.232.49.63
4110.232.49.64/2910.232.49.65 – 10.232.49.7010.232.49.71
4210.232.49.72/2910.232.49.73 – 10.232.49.7810.232.49.79
4310.232.49.80/2910.232.49.81 – 10.232.49.8610.232.49.87
4410.232.49.88/2910.232.49.89 – 10.232.49.9410.232.49.95
4510.232.49.96/2910.232.49.97 – 10.232.49.10210.232.49.103
4610.232.49.104/2910.232.49.105 – 10.232.49.11010.232.49.111
4710.232.49.112/2910.232.49.113 – 10.232.49.11810.232.49.119
4810.232.49.120/2910.232.49.121 – 10.232.49.12610.232.49.127
4910.232.49.128/2910.232.49.129 – 10.232.49.13410.232.49.135
5010.232.49.136/2910.232.49.137 – 10.232.49.14210.232.49.143
5110.232.49.144/2910.232.49.145 – 10.232.49.15010.232.49.151
5210.232.49.152/2910.232.49.153 – 10.232.49.15810.232.49.159
5310.232.49.160/2910.232.49.161 – 10.232.49.16610.232.49.167
5410.232.49.168/2910.232.49.169 – 10.232.49.17410.232.49.175
5510.232.49.176/2910.232.49.177 – 10.232.49.18210.232.49.183
5610.232.49.184/2910.232.49.185 – 10.232.49.19010.232.49.191
5710.232.49.192/2910.232.49.193 – 10.232.49.19810.232.49.199
5810.232.49.200/2910.232.49.201 – 10.232.49.20610.232.49.207
5910.232.49.208/2910.232.49.209 – 10.232.49.21410.232.49.215
6010.232.49.216/2910.232.49.217 – 10.232.49.22210.232.49.223
6110.232.49.224/2910.232.49.225 – 10.232.49.23010.232.49.231
6210.232.49.232/2910.232.49.233 – 10.232.49.23810.232.49.239
6310.232.49.240/2910.232.49.241 – 10.232.49.24610.232.49.247
6410.232.49.248/2910.232.49.249 – 10.232.49.25410.232.49.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /23
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.05125101
/24255.255.255.02562542 split →
/25255.255.255.1281281264 split →
/26255.255.255.19264628 split →
/27255.255.255.224323016 split →
/28255.255.255.240161432 split →
/29255.255.255.2488664 split →
/30255.255.255.25242128 split →
/31255.255.255.25422256 split →
/32255.255.255.25511512 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →