ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.232.28.0/23
network10.232.28.0/23
broadcast10.232.29.255
first host10.232.28.1
last host10.232.29.254
subnet mask255.255.254.0
wildcard0.0.1.255
addresses512
usable hosts510
classA
ipcalc 10.232.28.0/23
address00001010.11101000.00011100.00000000
subnet mask11111111.11111111.11111110.00000000
network00001010.11101000.00011100.00000000
broadcast00001010.11101000.00011101.11111111
green = network part, grey = host part
hex0x0ae81c00
decimal182983680
reverse dns0.28.232.10.in-addr.arpa
ipv4-mapped::ffff:ae8:1c00

/23 split into /29 · 64 subnets

close ×
#networkhost rangebroadcast
110.232.28.0/2910.232.28.1 – 10.232.28.610.232.28.7
210.232.28.8/2910.232.28.9 – 10.232.28.1410.232.28.15
310.232.28.16/2910.232.28.17 – 10.232.28.2210.232.28.23
410.232.28.24/2910.232.28.25 – 10.232.28.3010.232.28.31
510.232.28.32/2910.232.28.33 – 10.232.28.3810.232.28.39
610.232.28.40/2910.232.28.41 – 10.232.28.4610.232.28.47
710.232.28.48/2910.232.28.49 – 10.232.28.5410.232.28.55
810.232.28.56/2910.232.28.57 – 10.232.28.6210.232.28.63
910.232.28.64/2910.232.28.65 – 10.232.28.7010.232.28.71
1010.232.28.72/2910.232.28.73 – 10.232.28.7810.232.28.79
1110.232.28.80/2910.232.28.81 – 10.232.28.8610.232.28.87
1210.232.28.88/2910.232.28.89 – 10.232.28.9410.232.28.95
1310.232.28.96/2910.232.28.97 – 10.232.28.10210.232.28.103
1410.232.28.104/2910.232.28.105 – 10.232.28.11010.232.28.111
1510.232.28.112/2910.232.28.113 – 10.232.28.11810.232.28.119
1610.232.28.120/2910.232.28.121 – 10.232.28.12610.232.28.127
1710.232.28.128/2910.232.28.129 – 10.232.28.13410.232.28.135
1810.232.28.136/2910.232.28.137 – 10.232.28.14210.232.28.143
1910.232.28.144/2910.232.28.145 – 10.232.28.15010.232.28.151
2010.232.28.152/2910.232.28.153 – 10.232.28.15810.232.28.159
2110.232.28.160/2910.232.28.161 – 10.232.28.16610.232.28.167
2210.232.28.168/2910.232.28.169 – 10.232.28.17410.232.28.175
2310.232.28.176/2910.232.28.177 – 10.232.28.18210.232.28.183
2410.232.28.184/2910.232.28.185 – 10.232.28.19010.232.28.191
2510.232.28.192/2910.232.28.193 – 10.232.28.19810.232.28.199
2610.232.28.200/2910.232.28.201 – 10.232.28.20610.232.28.207
2710.232.28.208/2910.232.28.209 – 10.232.28.21410.232.28.215
2810.232.28.216/2910.232.28.217 – 10.232.28.22210.232.28.223
2910.232.28.224/2910.232.28.225 – 10.232.28.23010.232.28.231
3010.232.28.232/2910.232.28.233 – 10.232.28.23810.232.28.239
3110.232.28.240/2910.232.28.241 – 10.232.28.24610.232.28.247
3210.232.28.248/2910.232.28.249 – 10.232.28.25410.232.28.255
3310.232.29.0/2910.232.29.1 – 10.232.29.610.232.29.7
3410.232.29.8/2910.232.29.9 – 10.232.29.1410.232.29.15
3510.232.29.16/2910.232.29.17 – 10.232.29.2210.232.29.23
3610.232.29.24/2910.232.29.25 – 10.232.29.3010.232.29.31
3710.232.29.32/2910.232.29.33 – 10.232.29.3810.232.29.39
3810.232.29.40/2910.232.29.41 – 10.232.29.4610.232.29.47
3910.232.29.48/2910.232.29.49 – 10.232.29.5410.232.29.55
4010.232.29.56/2910.232.29.57 – 10.232.29.6210.232.29.63
4110.232.29.64/2910.232.29.65 – 10.232.29.7010.232.29.71
4210.232.29.72/2910.232.29.73 – 10.232.29.7810.232.29.79
4310.232.29.80/2910.232.29.81 – 10.232.29.8610.232.29.87
4410.232.29.88/2910.232.29.89 – 10.232.29.9410.232.29.95
4510.232.29.96/2910.232.29.97 – 10.232.29.10210.232.29.103
4610.232.29.104/2910.232.29.105 – 10.232.29.11010.232.29.111
4710.232.29.112/2910.232.29.113 – 10.232.29.11810.232.29.119
4810.232.29.120/2910.232.29.121 – 10.232.29.12610.232.29.127
4910.232.29.128/2910.232.29.129 – 10.232.29.13410.232.29.135
5010.232.29.136/2910.232.29.137 – 10.232.29.14210.232.29.143
5110.232.29.144/2910.232.29.145 – 10.232.29.15010.232.29.151
5210.232.29.152/2910.232.29.153 – 10.232.29.15810.232.29.159
5310.232.29.160/2910.232.29.161 – 10.232.29.16610.232.29.167
5410.232.29.168/2910.232.29.169 – 10.232.29.17410.232.29.175
5510.232.29.176/2910.232.29.177 – 10.232.29.18210.232.29.183
5610.232.29.184/2910.232.29.185 – 10.232.29.19010.232.29.191
5710.232.29.192/2910.232.29.193 – 10.232.29.19810.232.29.199
5810.232.29.200/2910.232.29.201 – 10.232.29.20610.232.29.207
5910.232.29.208/2910.232.29.209 – 10.232.29.21410.232.29.215
6010.232.29.216/2910.232.29.217 – 10.232.29.22210.232.29.223
6110.232.29.224/2910.232.29.225 – 10.232.29.23010.232.29.231
6210.232.29.232/2910.232.29.233 – 10.232.29.23810.232.29.239
6310.232.29.240/2910.232.29.241 – 10.232.29.24610.232.29.247
6410.232.29.248/2910.232.29.249 – 10.232.29.25410.232.29.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /23
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.05125101
/24255.255.255.02562542 split →
/25255.255.255.1281281264 split →
/26255.255.255.19264628 split →
/27255.255.255.224323016 split →
/28255.255.255.240161432 split →
/29255.255.255.2488664 split →
/30255.255.255.25242128 split →
/31255.255.255.25422256 split →
/32255.255.255.25511512 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →