ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.232.2.160/27
network10.232.2.160/27
broadcast10.232.2.191
first host10.232.2.161
last host10.232.2.190
subnet mask255.255.255.224
wildcard0.0.0.31
addresses32
usable hosts30
classA
ipcalc 10.232.2.160/27
address00001010.11101000.00000010.10100000
subnet mask11111111.11111111.11111111.11100000
network00001010.11101000.00000010.10100000
broadcast00001010.11101000.00000010.10111111
green = network part, grey = host part
hex0x0ae802a0
decimal182977184
reverse dns160.2.232.10.in-addr.arpa
ipv4-mapped::ffff:ae8:2a0

/27 split into /32 · 32 subnets

close ×
#networkhost rangebroadcast
110.232.2.160/3210.232.2.160 – 10.232.2.16010.232.2.160
210.232.2.161/3210.232.2.161 – 10.232.2.16110.232.2.161
310.232.2.162/3210.232.2.162 – 10.232.2.16210.232.2.162
410.232.2.163/3210.232.2.163 – 10.232.2.16310.232.2.163
510.232.2.164/3210.232.2.164 – 10.232.2.16410.232.2.164
610.232.2.165/3210.232.2.165 – 10.232.2.16510.232.2.165
710.232.2.166/3210.232.2.166 – 10.232.2.16610.232.2.166
810.232.2.167/3210.232.2.167 – 10.232.2.16710.232.2.167
910.232.2.168/3210.232.2.168 – 10.232.2.16810.232.2.168
1010.232.2.169/3210.232.2.169 – 10.232.2.16910.232.2.169
1110.232.2.170/3210.232.2.170 – 10.232.2.17010.232.2.170
1210.232.2.171/3210.232.2.171 – 10.232.2.17110.232.2.171
1310.232.2.172/3210.232.2.172 – 10.232.2.17210.232.2.172
1410.232.2.173/3210.232.2.173 – 10.232.2.17310.232.2.173
1510.232.2.174/3210.232.2.174 – 10.232.2.17410.232.2.174
1610.232.2.175/3210.232.2.175 – 10.232.2.17510.232.2.175
1710.232.2.176/3210.232.2.176 – 10.232.2.17610.232.2.176
1810.232.2.177/3210.232.2.177 – 10.232.2.17710.232.2.177
1910.232.2.178/3210.232.2.178 – 10.232.2.17810.232.2.178
2010.232.2.179/3210.232.2.179 – 10.232.2.17910.232.2.179
2110.232.2.180/3210.232.2.180 – 10.232.2.18010.232.2.180
2210.232.2.181/3210.232.2.181 – 10.232.2.18110.232.2.181
2310.232.2.182/3210.232.2.182 – 10.232.2.18210.232.2.182
2410.232.2.183/3210.232.2.183 – 10.232.2.18310.232.2.183
2510.232.2.184/3210.232.2.184 – 10.232.2.18410.232.2.184
2610.232.2.185/3210.232.2.185 – 10.232.2.18510.232.2.185
2710.232.2.186/3210.232.2.186 – 10.232.2.18610.232.2.186
2810.232.2.187/3210.232.2.187 – 10.232.2.18710.232.2.187
2910.232.2.188/3210.232.2.188 – 10.232.2.18810.232.2.188
3010.232.2.189/3210.232.2.189 – 10.232.2.18910.232.2.189
3110.232.2.190/3210.232.2.190 – 10.232.2.19010.232.2.190
3210.232.2.191/3210.232.2.191 – 10.232.2.19110.232.2.191
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /27
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.1926462-
/27255.255.255.22432301
/28255.255.255.24016142 split →
/29255.255.255.248864 split →
/30255.255.255.252428 split →
/31255.255.255.2542216 split →
/32255.255.255.2551132 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →