ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.231.45.0/24
network10.231.45.0/24
broadcast10.231.45.255
first host10.231.45.1
last host10.231.45.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.231.45.0/24
address00001010.11100111.00101101.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.11100111.00101101.00000000
broadcast00001010.11100111.00101101.11111111
green = network part, grey = host part
hex0x0ae72d00
decimal182922496
reverse dns0.45.231.10.in-addr.arpa
ipv4-mapped::ffff:ae7:2d00

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.231.45.0/3010.231.45.1 – 10.231.45.210.231.45.3
210.231.45.4/3010.231.45.5 – 10.231.45.610.231.45.7
310.231.45.8/3010.231.45.9 – 10.231.45.1010.231.45.11
410.231.45.12/3010.231.45.13 – 10.231.45.1410.231.45.15
510.231.45.16/3010.231.45.17 – 10.231.45.1810.231.45.19
610.231.45.20/3010.231.45.21 – 10.231.45.2210.231.45.23
710.231.45.24/3010.231.45.25 – 10.231.45.2610.231.45.27
810.231.45.28/3010.231.45.29 – 10.231.45.3010.231.45.31
910.231.45.32/3010.231.45.33 – 10.231.45.3410.231.45.35
1010.231.45.36/3010.231.45.37 – 10.231.45.3810.231.45.39
1110.231.45.40/3010.231.45.41 – 10.231.45.4210.231.45.43
1210.231.45.44/3010.231.45.45 – 10.231.45.4610.231.45.47
1310.231.45.48/3010.231.45.49 – 10.231.45.5010.231.45.51
1410.231.45.52/3010.231.45.53 – 10.231.45.5410.231.45.55
1510.231.45.56/3010.231.45.57 – 10.231.45.5810.231.45.59
1610.231.45.60/3010.231.45.61 – 10.231.45.6210.231.45.63
1710.231.45.64/3010.231.45.65 – 10.231.45.6610.231.45.67
1810.231.45.68/3010.231.45.69 – 10.231.45.7010.231.45.71
1910.231.45.72/3010.231.45.73 – 10.231.45.7410.231.45.75
2010.231.45.76/3010.231.45.77 – 10.231.45.7810.231.45.79
2110.231.45.80/3010.231.45.81 – 10.231.45.8210.231.45.83
2210.231.45.84/3010.231.45.85 – 10.231.45.8610.231.45.87
2310.231.45.88/3010.231.45.89 – 10.231.45.9010.231.45.91
2410.231.45.92/3010.231.45.93 – 10.231.45.9410.231.45.95
2510.231.45.96/3010.231.45.97 – 10.231.45.9810.231.45.99
2610.231.45.100/3010.231.45.101 – 10.231.45.10210.231.45.103
2710.231.45.104/3010.231.45.105 – 10.231.45.10610.231.45.107
2810.231.45.108/3010.231.45.109 – 10.231.45.11010.231.45.111
2910.231.45.112/3010.231.45.113 – 10.231.45.11410.231.45.115
3010.231.45.116/3010.231.45.117 – 10.231.45.11810.231.45.119
3110.231.45.120/3010.231.45.121 – 10.231.45.12210.231.45.123
3210.231.45.124/3010.231.45.125 – 10.231.45.12610.231.45.127
3310.231.45.128/3010.231.45.129 – 10.231.45.13010.231.45.131
3410.231.45.132/3010.231.45.133 – 10.231.45.13410.231.45.135
3510.231.45.136/3010.231.45.137 – 10.231.45.13810.231.45.139
3610.231.45.140/3010.231.45.141 – 10.231.45.14210.231.45.143
3710.231.45.144/3010.231.45.145 – 10.231.45.14610.231.45.147
3810.231.45.148/3010.231.45.149 – 10.231.45.15010.231.45.151
3910.231.45.152/3010.231.45.153 – 10.231.45.15410.231.45.155
4010.231.45.156/3010.231.45.157 – 10.231.45.15810.231.45.159
4110.231.45.160/3010.231.45.161 – 10.231.45.16210.231.45.163
4210.231.45.164/3010.231.45.165 – 10.231.45.16610.231.45.167
4310.231.45.168/3010.231.45.169 – 10.231.45.17010.231.45.171
4410.231.45.172/3010.231.45.173 – 10.231.45.17410.231.45.175
4510.231.45.176/3010.231.45.177 – 10.231.45.17810.231.45.179
4610.231.45.180/3010.231.45.181 – 10.231.45.18210.231.45.183
4710.231.45.184/3010.231.45.185 – 10.231.45.18610.231.45.187
4810.231.45.188/3010.231.45.189 – 10.231.45.19010.231.45.191
4910.231.45.192/3010.231.45.193 – 10.231.45.19410.231.45.195
5010.231.45.196/3010.231.45.197 – 10.231.45.19810.231.45.199
5110.231.45.200/3010.231.45.201 – 10.231.45.20210.231.45.203
5210.231.45.204/3010.231.45.205 – 10.231.45.20610.231.45.207
5310.231.45.208/3010.231.45.209 – 10.231.45.21010.231.45.211
5410.231.45.212/3010.231.45.213 – 10.231.45.21410.231.45.215
5510.231.45.216/3010.231.45.217 – 10.231.45.21810.231.45.219
5610.231.45.220/3010.231.45.221 – 10.231.45.22210.231.45.223
5710.231.45.224/3010.231.45.225 – 10.231.45.22610.231.45.227
5810.231.45.228/3010.231.45.229 – 10.231.45.23010.231.45.231
5910.231.45.232/3010.231.45.233 – 10.231.45.23410.231.45.235
6010.231.45.236/3010.231.45.237 – 10.231.45.23810.231.45.239
6110.231.45.240/3010.231.45.241 – 10.231.45.24210.231.45.243
6210.231.45.244/3010.231.45.245 – 10.231.45.24610.231.45.247
6310.231.45.248/3010.231.45.249 – 10.231.45.25010.231.45.251
6410.231.45.252/3010.231.45.253 – 10.231.45.25410.231.45.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →