ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.22.192.0/19
network10.22.192.0/19
broadcast10.22.223.255
first host10.22.192.1
last host10.22.223.254
subnet mask255.255.224.0
wildcard0.0.31.255
addresses8,192
usable hosts8,190
classA
ipcalc 10.22.192.0/19
address00001010.00010110.11000000.00000000
subnet mask11111111.11111111.11100000.00000000
network00001010.00010110.11000000.00000000
broadcast00001010.00010110.11011111.11111111
green = network part, grey = host part
hex0x0a16c000
decimal169263104
reverse dns0.192.22.10.in-addr.arpa
ipv4-mapped::ffff:a16:c000

/19 split into /24 · 32 subnets

close ×
#networkhost rangebroadcast
110.22.192.0/2410.22.192.1 – 10.22.192.25410.22.192.255
210.22.193.0/2410.22.193.1 – 10.22.193.25410.22.193.255
310.22.194.0/2410.22.194.1 – 10.22.194.25410.22.194.255
410.22.195.0/2410.22.195.1 – 10.22.195.25410.22.195.255
510.22.196.0/2410.22.196.1 – 10.22.196.25410.22.196.255
610.22.197.0/2410.22.197.1 – 10.22.197.25410.22.197.255
710.22.198.0/2410.22.198.1 – 10.22.198.25410.22.198.255
810.22.199.0/2410.22.199.1 – 10.22.199.25410.22.199.255
910.22.200.0/2410.22.200.1 – 10.22.200.25410.22.200.255
1010.22.201.0/2410.22.201.1 – 10.22.201.25410.22.201.255
1110.22.202.0/2410.22.202.1 – 10.22.202.25410.22.202.255
1210.22.203.0/2410.22.203.1 – 10.22.203.25410.22.203.255
1310.22.204.0/2410.22.204.1 – 10.22.204.25410.22.204.255
1410.22.205.0/2410.22.205.1 – 10.22.205.25410.22.205.255
1510.22.206.0/2410.22.206.1 – 10.22.206.25410.22.206.255
1610.22.207.0/2410.22.207.1 – 10.22.207.25410.22.207.255
1710.22.208.0/2410.22.208.1 – 10.22.208.25410.22.208.255
1810.22.209.0/2410.22.209.1 – 10.22.209.25410.22.209.255
1910.22.210.0/2410.22.210.1 – 10.22.210.25410.22.210.255
2010.22.211.0/2410.22.211.1 – 10.22.211.25410.22.211.255
2110.22.212.0/2410.22.212.1 – 10.22.212.25410.22.212.255
2210.22.213.0/2410.22.213.1 – 10.22.213.25410.22.213.255
2310.22.214.0/2410.22.214.1 – 10.22.214.25410.22.214.255
2410.22.215.0/2410.22.215.1 – 10.22.215.25410.22.215.255
2510.22.216.0/2410.22.216.1 – 10.22.216.25410.22.216.255
2610.22.217.0/2410.22.217.1 – 10.22.217.25410.22.217.255
2710.22.218.0/2410.22.218.1 – 10.22.218.25410.22.218.255
2810.22.219.0/2410.22.219.1 – 10.22.219.25410.22.219.255
2910.22.220.0/2410.22.220.1 – 10.22.220.25410.22.220.255
3010.22.221.0/2410.22.221.1 – 10.22.221.25410.22.221.255
3110.22.222.0/2410.22.222.1 – 10.22.222.25410.22.222.255
3210.22.223.0/2410.22.223.1 – 10.22.223.25410.22.223.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /19
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,1901
/20255.255.240.04,0964,0942 split →
/21255.255.248.02,0482,0464 split →
/22255.255.252.01,0241,0228 split →
/23255.255.254.051251016 split →
/24255.255.255.025625432 split →
/25255.255.255.12812812664 split →
/26255.255.255.1926462128 split →
/27255.255.255.2243230256 split →
/28255.255.255.2401614512 split →
/29255.255.255.248861,024 split →
/30255.255.255.252422,048 split →
/31255.255.255.254224,096 split →
/32255.255.255.255118,192 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →