ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.214.0.0/15
network10.214.0.0/15
broadcast10.215.255.255
first host10.214.0.1
last host10.215.255.254
subnet mask255.254.0.0
wildcard0.1.255.255
addresses131,072
usable hosts131,070
classA
ipcalc 10.214.0.0/15
address00001010.11010110.00000000.00000000
subnet mask11111111.11111110.00000000.00000000
network00001010.11010110.00000000.00000000
broadcast00001010.11010111.11111111.11111111
green = network part, grey = host part
hex0x0ad60000
decimal181796864
reverse dns0.0.214.10.in-addr.arpa
ipv4-mapped::ffff:ad6:0

/15 split into /21 · 64 subnets

close ×
#networkhost rangebroadcast
110.214.0.0/2110.214.0.1 – 10.214.7.25410.214.7.255
210.214.8.0/2110.214.8.1 – 10.214.15.25410.214.15.255
310.214.16.0/2110.214.16.1 – 10.214.23.25410.214.23.255
410.214.24.0/2110.214.24.1 – 10.214.31.25410.214.31.255
510.214.32.0/2110.214.32.1 – 10.214.39.25410.214.39.255
610.214.40.0/2110.214.40.1 – 10.214.47.25410.214.47.255
710.214.48.0/2110.214.48.1 – 10.214.55.25410.214.55.255
810.214.56.0/2110.214.56.1 – 10.214.63.25410.214.63.255
910.214.64.0/2110.214.64.1 – 10.214.71.25410.214.71.255
1010.214.72.0/2110.214.72.1 – 10.214.79.25410.214.79.255
1110.214.80.0/2110.214.80.1 – 10.214.87.25410.214.87.255
1210.214.88.0/2110.214.88.1 – 10.214.95.25410.214.95.255
1310.214.96.0/2110.214.96.1 – 10.214.103.25410.214.103.255
1410.214.104.0/2110.214.104.1 – 10.214.111.25410.214.111.255
1510.214.112.0/2110.214.112.1 – 10.214.119.25410.214.119.255
1610.214.120.0/2110.214.120.1 – 10.214.127.25410.214.127.255
1710.214.128.0/2110.214.128.1 – 10.214.135.25410.214.135.255
1810.214.136.0/2110.214.136.1 – 10.214.143.25410.214.143.255
1910.214.144.0/2110.214.144.1 – 10.214.151.25410.214.151.255
2010.214.152.0/2110.214.152.1 – 10.214.159.25410.214.159.255
2110.214.160.0/2110.214.160.1 – 10.214.167.25410.214.167.255
2210.214.168.0/2110.214.168.1 – 10.214.175.25410.214.175.255
2310.214.176.0/2110.214.176.1 – 10.214.183.25410.214.183.255
2410.214.184.0/2110.214.184.1 – 10.214.191.25410.214.191.255
2510.214.192.0/2110.214.192.1 – 10.214.199.25410.214.199.255
2610.214.200.0/2110.214.200.1 – 10.214.207.25410.214.207.255
2710.214.208.0/2110.214.208.1 – 10.214.215.25410.214.215.255
2810.214.216.0/2110.214.216.1 – 10.214.223.25410.214.223.255
2910.214.224.0/2110.214.224.1 – 10.214.231.25410.214.231.255
3010.214.232.0/2110.214.232.1 – 10.214.239.25410.214.239.255
3110.214.240.0/2110.214.240.1 – 10.214.247.25410.214.247.255
3210.214.248.0/2110.214.248.1 – 10.214.255.25410.214.255.255
3310.215.0.0/2110.215.0.1 – 10.215.7.25410.215.7.255
3410.215.8.0/2110.215.8.1 – 10.215.15.25410.215.15.255
3510.215.16.0/2110.215.16.1 – 10.215.23.25410.215.23.255
3610.215.24.0/2110.215.24.1 – 10.215.31.25410.215.31.255
3710.215.32.0/2110.215.32.1 – 10.215.39.25410.215.39.255
3810.215.40.0/2110.215.40.1 – 10.215.47.25410.215.47.255
3910.215.48.0/2110.215.48.1 – 10.215.55.25410.215.55.255
4010.215.56.0/2110.215.56.1 – 10.215.63.25410.215.63.255
4110.215.64.0/2110.215.64.1 – 10.215.71.25410.215.71.255
4210.215.72.0/2110.215.72.1 – 10.215.79.25410.215.79.255
4310.215.80.0/2110.215.80.1 – 10.215.87.25410.215.87.255
4410.215.88.0/2110.215.88.1 – 10.215.95.25410.215.95.255
4510.215.96.0/2110.215.96.1 – 10.215.103.25410.215.103.255
4610.215.104.0/2110.215.104.1 – 10.215.111.25410.215.111.255
4710.215.112.0/2110.215.112.1 – 10.215.119.25410.215.119.255
4810.215.120.0/2110.215.120.1 – 10.215.127.25410.215.127.255
4910.215.128.0/2110.215.128.1 – 10.215.135.25410.215.135.255
5010.215.136.0/2110.215.136.1 – 10.215.143.25410.215.143.255
5110.215.144.0/2110.215.144.1 – 10.215.151.25410.215.151.255
5210.215.152.0/2110.215.152.1 – 10.215.159.25410.215.159.255
5310.215.160.0/2110.215.160.1 – 10.215.167.25410.215.167.255
5410.215.168.0/2110.215.168.1 – 10.215.175.25410.215.175.255
5510.215.176.0/2110.215.176.1 – 10.215.183.25410.215.183.255
5610.215.184.0/2110.215.184.1 – 10.215.191.25410.215.191.255
5710.215.192.0/2110.215.192.1 – 10.215.199.25410.215.199.255
5810.215.200.0/2110.215.200.1 – 10.215.207.25410.215.207.255
5910.215.208.0/2110.215.208.1 – 10.215.215.25410.215.215.255
6010.215.216.0/2110.215.216.1 – 10.215.223.25410.215.223.255
6110.215.224.0/2110.215.224.1 – 10.215.231.25410.215.231.255
6210.215.232.0/2110.215.232.1 – 10.215.239.25410.215.239.255
6310.215.240.0/2110.215.240.1 – 10.215.247.25410.215.247.255
6410.215.248.0/2110.215.248.1 – 10.215.255.25410.215.255.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /15
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,0701
/16255.255.0.065,53665,5342 split →
/17255.255.128.032,76832,7664 split →
/18255.255.192.016,38416,3828 split →
/19255.255.224.08,1928,19016 split →
/20255.255.240.04,0964,09432 split →
/21255.255.248.02,0482,04664 split →
/22255.255.252.01,0241,022128 split →
/23255.255.254.0512510256 split →
/24255.255.255.0256254512 split →
/25255.255.255.1281281261,024 split →
/26255.255.255.19264622,048 split →
/27255.255.255.22432304,096 split →
/28255.255.255.24016148,192 split →
/29255.255.255.2488616,384 split →
/30255.255.255.2524232,768 split →
/31255.255.255.2542265,536 split →
/32255.255.255.25511131,072 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →