ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.21.96.0/19
network10.21.96.0/19
broadcast10.21.127.255
first host10.21.96.1
last host10.21.127.254
subnet mask255.255.224.0
wildcard0.0.31.255
addresses8,192
usable hosts8,190
classA
ipcalc 10.21.96.0/19
address00001010.00010101.01100000.00000000
subnet mask11111111.11111111.11100000.00000000
network00001010.00010101.01100000.00000000
broadcast00001010.00010101.01111111.11111111
green = network part, grey = host part
hex0x0a156000
decimal169172992
reverse dns0.96.21.10.in-addr.arpa
ipv4-mapped::ffff:a15:6000

/19 split into /25 · 64 subnets

close ×
#networkhost rangebroadcast
110.21.96.0/2510.21.96.1 – 10.21.96.12610.21.96.127
210.21.96.128/2510.21.96.129 – 10.21.96.25410.21.96.255
310.21.97.0/2510.21.97.1 – 10.21.97.12610.21.97.127
410.21.97.128/2510.21.97.129 – 10.21.97.25410.21.97.255
510.21.98.0/2510.21.98.1 – 10.21.98.12610.21.98.127
610.21.98.128/2510.21.98.129 – 10.21.98.25410.21.98.255
710.21.99.0/2510.21.99.1 – 10.21.99.12610.21.99.127
810.21.99.128/2510.21.99.129 – 10.21.99.25410.21.99.255
910.21.100.0/2510.21.100.1 – 10.21.100.12610.21.100.127
1010.21.100.128/2510.21.100.129 – 10.21.100.25410.21.100.255
1110.21.101.0/2510.21.101.1 – 10.21.101.12610.21.101.127
1210.21.101.128/2510.21.101.129 – 10.21.101.25410.21.101.255
1310.21.102.0/2510.21.102.1 – 10.21.102.12610.21.102.127
1410.21.102.128/2510.21.102.129 – 10.21.102.25410.21.102.255
1510.21.103.0/2510.21.103.1 – 10.21.103.12610.21.103.127
1610.21.103.128/2510.21.103.129 – 10.21.103.25410.21.103.255
1710.21.104.0/2510.21.104.1 – 10.21.104.12610.21.104.127
1810.21.104.128/2510.21.104.129 – 10.21.104.25410.21.104.255
1910.21.105.0/2510.21.105.1 – 10.21.105.12610.21.105.127
2010.21.105.128/2510.21.105.129 – 10.21.105.25410.21.105.255
2110.21.106.0/2510.21.106.1 – 10.21.106.12610.21.106.127
2210.21.106.128/2510.21.106.129 – 10.21.106.25410.21.106.255
2310.21.107.0/2510.21.107.1 – 10.21.107.12610.21.107.127
2410.21.107.128/2510.21.107.129 – 10.21.107.25410.21.107.255
2510.21.108.0/2510.21.108.1 – 10.21.108.12610.21.108.127
2610.21.108.128/2510.21.108.129 – 10.21.108.25410.21.108.255
2710.21.109.0/2510.21.109.1 – 10.21.109.12610.21.109.127
2810.21.109.128/2510.21.109.129 – 10.21.109.25410.21.109.255
2910.21.110.0/2510.21.110.1 – 10.21.110.12610.21.110.127
3010.21.110.128/2510.21.110.129 – 10.21.110.25410.21.110.255
3110.21.111.0/2510.21.111.1 – 10.21.111.12610.21.111.127
3210.21.111.128/2510.21.111.129 – 10.21.111.25410.21.111.255
3310.21.112.0/2510.21.112.1 – 10.21.112.12610.21.112.127
3410.21.112.128/2510.21.112.129 – 10.21.112.25410.21.112.255
3510.21.113.0/2510.21.113.1 – 10.21.113.12610.21.113.127
3610.21.113.128/2510.21.113.129 – 10.21.113.25410.21.113.255
3710.21.114.0/2510.21.114.1 – 10.21.114.12610.21.114.127
3810.21.114.128/2510.21.114.129 – 10.21.114.25410.21.114.255
3910.21.115.0/2510.21.115.1 – 10.21.115.12610.21.115.127
4010.21.115.128/2510.21.115.129 – 10.21.115.25410.21.115.255
4110.21.116.0/2510.21.116.1 – 10.21.116.12610.21.116.127
4210.21.116.128/2510.21.116.129 – 10.21.116.25410.21.116.255
4310.21.117.0/2510.21.117.1 – 10.21.117.12610.21.117.127
4410.21.117.128/2510.21.117.129 – 10.21.117.25410.21.117.255
4510.21.118.0/2510.21.118.1 – 10.21.118.12610.21.118.127
4610.21.118.128/2510.21.118.129 – 10.21.118.25410.21.118.255
4710.21.119.0/2510.21.119.1 – 10.21.119.12610.21.119.127
4810.21.119.128/2510.21.119.129 – 10.21.119.25410.21.119.255
4910.21.120.0/2510.21.120.1 – 10.21.120.12610.21.120.127
5010.21.120.128/2510.21.120.129 – 10.21.120.25410.21.120.255
5110.21.121.0/2510.21.121.1 – 10.21.121.12610.21.121.127
5210.21.121.128/2510.21.121.129 – 10.21.121.25410.21.121.255
5310.21.122.0/2510.21.122.1 – 10.21.122.12610.21.122.127
5410.21.122.128/2510.21.122.129 – 10.21.122.25410.21.122.255
5510.21.123.0/2510.21.123.1 – 10.21.123.12610.21.123.127
5610.21.123.128/2510.21.123.129 – 10.21.123.25410.21.123.255
5710.21.124.0/2510.21.124.1 – 10.21.124.12610.21.124.127
5810.21.124.128/2510.21.124.129 – 10.21.124.25410.21.124.255
5910.21.125.0/2510.21.125.1 – 10.21.125.12610.21.125.127
6010.21.125.128/2510.21.125.129 – 10.21.125.25410.21.125.255
6110.21.126.0/2510.21.126.1 – 10.21.126.12610.21.126.127
6210.21.126.128/2510.21.126.129 – 10.21.126.25410.21.126.255
6310.21.127.0/2510.21.127.1 – 10.21.127.12610.21.127.127
6410.21.127.128/2510.21.127.129 – 10.21.127.25410.21.127.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /19
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,1901
/20255.255.240.04,0964,0942 split →
/21255.255.248.02,0482,0464 split →
/22255.255.252.01,0241,0228 split →
/23255.255.254.051251016 split →
/24255.255.255.025625432 split →
/25255.255.255.12812812664 split →
/26255.255.255.1926462128 split →
/27255.255.255.2243230256 split →
/28255.255.255.2401614512 split →
/29255.255.255.248861,024 split →
/30255.255.255.252422,048 split →
/31255.255.255.254224,096 split →
/32255.255.255.255118,192 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →