ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.201.74.0/24
network10.201.74.0/24
broadcast10.201.74.255
first host10.201.74.1
last host10.201.74.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.201.74.0/24
address00001010.11001001.01001010.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.11001001.01001010.00000000
broadcast00001010.11001001.01001010.11111111
green = network part, grey = host part
hex0x0ac94a00
decimal180963840
reverse dns0.74.201.10.in-addr.arpa
ipv4-mapped::ffff:ac9:4a00

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.201.74.0/3010.201.74.1 – 10.201.74.210.201.74.3
210.201.74.4/3010.201.74.5 – 10.201.74.610.201.74.7
310.201.74.8/3010.201.74.9 – 10.201.74.1010.201.74.11
410.201.74.12/3010.201.74.13 – 10.201.74.1410.201.74.15
510.201.74.16/3010.201.74.17 – 10.201.74.1810.201.74.19
610.201.74.20/3010.201.74.21 – 10.201.74.2210.201.74.23
710.201.74.24/3010.201.74.25 – 10.201.74.2610.201.74.27
810.201.74.28/3010.201.74.29 – 10.201.74.3010.201.74.31
910.201.74.32/3010.201.74.33 – 10.201.74.3410.201.74.35
1010.201.74.36/3010.201.74.37 – 10.201.74.3810.201.74.39
1110.201.74.40/3010.201.74.41 – 10.201.74.4210.201.74.43
1210.201.74.44/3010.201.74.45 – 10.201.74.4610.201.74.47
1310.201.74.48/3010.201.74.49 – 10.201.74.5010.201.74.51
1410.201.74.52/3010.201.74.53 – 10.201.74.5410.201.74.55
1510.201.74.56/3010.201.74.57 – 10.201.74.5810.201.74.59
1610.201.74.60/3010.201.74.61 – 10.201.74.6210.201.74.63
1710.201.74.64/3010.201.74.65 – 10.201.74.6610.201.74.67
1810.201.74.68/3010.201.74.69 – 10.201.74.7010.201.74.71
1910.201.74.72/3010.201.74.73 – 10.201.74.7410.201.74.75
2010.201.74.76/3010.201.74.77 – 10.201.74.7810.201.74.79
2110.201.74.80/3010.201.74.81 – 10.201.74.8210.201.74.83
2210.201.74.84/3010.201.74.85 – 10.201.74.8610.201.74.87
2310.201.74.88/3010.201.74.89 – 10.201.74.9010.201.74.91
2410.201.74.92/3010.201.74.93 – 10.201.74.9410.201.74.95
2510.201.74.96/3010.201.74.97 – 10.201.74.9810.201.74.99
2610.201.74.100/3010.201.74.101 – 10.201.74.10210.201.74.103
2710.201.74.104/3010.201.74.105 – 10.201.74.10610.201.74.107
2810.201.74.108/3010.201.74.109 – 10.201.74.11010.201.74.111
2910.201.74.112/3010.201.74.113 – 10.201.74.11410.201.74.115
3010.201.74.116/3010.201.74.117 – 10.201.74.11810.201.74.119
3110.201.74.120/3010.201.74.121 – 10.201.74.12210.201.74.123
3210.201.74.124/3010.201.74.125 – 10.201.74.12610.201.74.127
3310.201.74.128/3010.201.74.129 – 10.201.74.13010.201.74.131
3410.201.74.132/3010.201.74.133 – 10.201.74.13410.201.74.135
3510.201.74.136/3010.201.74.137 – 10.201.74.13810.201.74.139
3610.201.74.140/3010.201.74.141 – 10.201.74.14210.201.74.143
3710.201.74.144/3010.201.74.145 – 10.201.74.14610.201.74.147
3810.201.74.148/3010.201.74.149 – 10.201.74.15010.201.74.151
3910.201.74.152/3010.201.74.153 – 10.201.74.15410.201.74.155
4010.201.74.156/3010.201.74.157 – 10.201.74.15810.201.74.159
4110.201.74.160/3010.201.74.161 – 10.201.74.16210.201.74.163
4210.201.74.164/3010.201.74.165 – 10.201.74.16610.201.74.167
4310.201.74.168/3010.201.74.169 – 10.201.74.17010.201.74.171
4410.201.74.172/3010.201.74.173 – 10.201.74.17410.201.74.175
4510.201.74.176/3010.201.74.177 – 10.201.74.17810.201.74.179
4610.201.74.180/3010.201.74.181 – 10.201.74.18210.201.74.183
4710.201.74.184/3010.201.74.185 – 10.201.74.18610.201.74.187
4810.201.74.188/3010.201.74.189 – 10.201.74.19010.201.74.191
4910.201.74.192/3010.201.74.193 – 10.201.74.19410.201.74.195
5010.201.74.196/3010.201.74.197 – 10.201.74.19810.201.74.199
5110.201.74.200/3010.201.74.201 – 10.201.74.20210.201.74.203
5210.201.74.204/3010.201.74.205 – 10.201.74.20610.201.74.207
5310.201.74.208/3010.201.74.209 – 10.201.74.21010.201.74.211
5410.201.74.212/3010.201.74.213 – 10.201.74.21410.201.74.215
5510.201.74.216/3010.201.74.217 – 10.201.74.21810.201.74.219
5610.201.74.220/3010.201.74.221 – 10.201.74.22210.201.74.223
5710.201.74.224/3010.201.74.225 – 10.201.74.22610.201.74.227
5810.201.74.228/3010.201.74.229 – 10.201.74.23010.201.74.231
5910.201.74.232/3010.201.74.233 – 10.201.74.23410.201.74.235
6010.201.74.236/3010.201.74.237 – 10.201.74.23810.201.74.239
6110.201.74.240/3010.201.74.241 – 10.201.74.24210.201.74.243
6210.201.74.244/3010.201.74.245 – 10.201.74.24610.201.74.247
6310.201.74.248/3010.201.74.249 – 10.201.74.25010.201.74.251
6410.201.74.252/3010.201.74.253 – 10.201.74.25410.201.74.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →