ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.201.48.0/26
network10.201.48.0/26
broadcast10.201.48.63
first host10.201.48.1
last host10.201.48.62
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classA
ipcalc 10.201.48.0/26
address00001010.11001001.00110000.00000000
subnet mask11111111.11111111.11111111.11000000
network00001010.11001001.00110000.00000000
broadcast00001010.11001001.00110000.00111111
green = network part, grey = host part
hex0x0ac93000
decimal180957184
reverse dns0.48.201.10.in-addr.arpa
ipv4-mapped::ffff:ac9:3000

/26 split into /32 · 64 subnets

close ×
#networkhost rangebroadcast
110.201.48.0/3210.201.48.0 – 10.201.48.010.201.48.0
210.201.48.1/3210.201.48.1 – 10.201.48.110.201.48.1
310.201.48.2/3210.201.48.2 – 10.201.48.210.201.48.2
410.201.48.3/3210.201.48.3 – 10.201.48.310.201.48.3
510.201.48.4/3210.201.48.4 – 10.201.48.410.201.48.4
610.201.48.5/3210.201.48.5 – 10.201.48.510.201.48.5
710.201.48.6/3210.201.48.6 – 10.201.48.610.201.48.6
810.201.48.7/3210.201.48.7 – 10.201.48.710.201.48.7
910.201.48.8/3210.201.48.8 – 10.201.48.810.201.48.8
1010.201.48.9/3210.201.48.9 – 10.201.48.910.201.48.9
1110.201.48.10/3210.201.48.10 – 10.201.48.1010.201.48.10
1210.201.48.11/3210.201.48.11 – 10.201.48.1110.201.48.11
1310.201.48.12/3210.201.48.12 – 10.201.48.1210.201.48.12
1410.201.48.13/3210.201.48.13 – 10.201.48.1310.201.48.13
1510.201.48.14/3210.201.48.14 – 10.201.48.1410.201.48.14
1610.201.48.15/3210.201.48.15 – 10.201.48.1510.201.48.15
1710.201.48.16/3210.201.48.16 – 10.201.48.1610.201.48.16
1810.201.48.17/3210.201.48.17 – 10.201.48.1710.201.48.17
1910.201.48.18/3210.201.48.18 – 10.201.48.1810.201.48.18
2010.201.48.19/3210.201.48.19 – 10.201.48.1910.201.48.19
2110.201.48.20/3210.201.48.20 – 10.201.48.2010.201.48.20
2210.201.48.21/3210.201.48.21 – 10.201.48.2110.201.48.21
2310.201.48.22/3210.201.48.22 – 10.201.48.2210.201.48.22
2410.201.48.23/3210.201.48.23 – 10.201.48.2310.201.48.23
2510.201.48.24/3210.201.48.24 – 10.201.48.2410.201.48.24
2610.201.48.25/3210.201.48.25 – 10.201.48.2510.201.48.25
2710.201.48.26/3210.201.48.26 – 10.201.48.2610.201.48.26
2810.201.48.27/3210.201.48.27 – 10.201.48.2710.201.48.27
2910.201.48.28/3210.201.48.28 – 10.201.48.2810.201.48.28
3010.201.48.29/3210.201.48.29 – 10.201.48.2910.201.48.29
3110.201.48.30/3210.201.48.30 – 10.201.48.3010.201.48.30
3210.201.48.31/3210.201.48.31 – 10.201.48.3110.201.48.31
3310.201.48.32/3210.201.48.32 – 10.201.48.3210.201.48.32
3410.201.48.33/3210.201.48.33 – 10.201.48.3310.201.48.33
3510.201.48.34/3210.201.48.34 – 10.201.48.3410.201.48.34
3610.201.48.35/3210.201.48.35 – 10.201.48.3510.201.48.35
3710.201.48.36/3210.201.48.36 – 10.201.48.3610.201.48.36
3810.201.48.37/3210.201.48.37 – 10.201.48.3710.201.48.37
3910.201.48.38/3210.201.48.38 – 10.201.48.3810.201.48.38
4010.201.48.39/3210.201.48.39 – 10.201.48.3910.201.48.39
4110.201.48.40/3210.201.48.40 – 10.201.48.4010.201.48.40
4210.201.48.41/3210.201.48.41 – 10.201.48.4110.201.48.41
4310.201.48.42/3210.201.48.42 – 10.201.48.4210.201.48.42
4410.201.48.43/3210.201.48.43 – 10.201.48.4310.201.48.43
4510.201.48.44/3210.201.48.44 – 10.201.48.4410.201.48.44
4610.201.48.45/3210.201.48.45 – 10.201.48.4510.201.48.45
4710.201.48.46/3210.201.48.46 – 10.201.48.4610.201.48.46
4810.201.48.47/3210.201.48.47 – 10.201.48.4710.201.48.47
4910.201.48.48/3210.201.48.48 – 10.201.48.4810.201.48.48
5010.201.48.49/3210.201.48.49 – 10.201.48.4910.201.48.49
5110.201.48.50/3210.201.48.50 – 10.201.48.5010.201.48.50
5210.201.48.51/3210.201.48.51 – 10.201.48.5110.201.48.51
5310.201.48.52/3210.201.48.52 – 10.201.48.5210.201.48.52
5410.201.48.53/3210.201.48.53 – 10.201.48.5310.201.48.53
5510.201.48.54/3210.201.48.54 – 10.201.48.5410.201.48.54
5610.201.48.55/3210.201.48.55 – 10.201.48.5510.201.48.55
5710.201.48.56/3210.201.48.56 – 10.201.48.5610.201.48.56
5810.201.48.57/3210.201.48.57 – 10.201.48.5710.201.48.57
5910.201.48.58/3210.201.48.58 – 10.201.48.5810.201.48.58
6010.201.48.59/3210.201.48.59 – 10.201.48.5910.201.48.59
6110.201.48.60/3210.201.48.60 – 10.201.48.6010.201.48.60
6210.201.48.61/3210.201.48.61 – 10.201.48.6110.201.48.61
6310.201.48.62/3210.201.48.62 – 10.201.48.6210.201.48.62
6410.201.48.63/3210.201.48.63 – 10.201.48.6310.201.48.63
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /26
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.19264621
/27255.255.255.22432302 split →
/28255.255.255.24016144 split →
/29255.255.255.248868 split →
/30255.255.255.2524216 split →
/31255.255.255.2542232 split →
/32255.255.255.2551164 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →