ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.201.48.0/20
network10.201.48.0/20
broadcast10.201.63.255
first host10.201.48.1
last host10.201.63.254
subnet mask255.255.240.0
wildcard0.0.15.255
addresses4,096
usable hosts4,094
classA
ipcalc 10.201.48.0/20
address00001010.11001001.00110000.00000000
subnet mask11111111.11111111.11110000.00000000
network00001010.11001001.00110000.00000000
broadcast00001010.11001001.00111111.11111111
green = network part, grey = host part
hex0x0ac93000
decimal180957184
reverse dns0.48.201.10.in-addr.arpa
ipv4-mapped::ffff:ac9:3000

/20 split into /25 · 32 subnets

close ×
#networkhost rangebroadcast
110.201.48.0/2510.201.48.1 – 10.201.48.12610.201.48.127
210.201.48.128/2510.201.48.129 – 10.201.48.25410.201.48.255
310.201.49.0/2510.201.49.1 – 10.201.49.12610.201.49.127
410.201.49.128/2510.201.49.129 – 10.201.49.25410.201.49.255
510.201.50.0/2510.201.50.1 – 10.201.50.12610.201.50.127
610.201.50.128/2510.201.50.129 – 10.201.50.25410.201.50.255
710.201.51.0/2510.201.51.1 – 10.201.51.12610.201.51.127
810.201.51.128/2510.201.51.129 – 10.201.51.25410.201.51.255
910.201.52.0/2510.201.52.1 – 10.201.52.12610.201.52.127
1010.201.52.128/2510.201.52.129 – 10.201.52.25410.201.52.255
1110.201.53.0/2510.201.53.1 – 10.201.53.12610.201.53.127
1210.201.53.128/2510.201.53.129 – 10.201.53.25410.201.53.255
1310.201.54.0/2510.201.54.1 – 10.201.54.12610.201.54.127
1410.201.54.128/2510.201.54.129 – 10.201.54.25410.201.54.255
1510.201.55.0/2510.201.55.1 – 10.201.55.12610.201.55.127
1610.201.55.128/2510.201.55.129 – 10.201.55.25410.201.55.255
1710.201.56.0/2510.201.56.1 – 10.201.56.12610.201.56.127
1810.201.56.128/2510.201.56.129 – 10.201.56.25410.201.56.255
1910.201.57.0/2510.201.57.1 – 10.201.57.12610.201.57.127
2010.201.57.128/2510.201.57.129 – 10.201.57.25410.201.57.255
2110.201.58.0/2510.201.58.1 – 10.201.58.12610.201.58.127
2210.201.58.128/2510.201.58.129 – 10.201.58.25410.201.58.255
2310.201.59.0/2510.201.59.1 – 10.201.59.12610.201.59.127
2410.201.59.128/2510.201.59.129 – 10.201.59.25410.201.59.255
2510.201.60.0/2510.201.60.1 – 10.201.60.12610.201.60.127
2610.201.60.128/2510.201.60.129 – 10.201.60.25410.201.60.255
2710.201.61.0/2510.201.61.1 – 10.201.61.12610.201.61.127
2810.201.61.128/2510.201.61.129 – 10.201.61.25410.201.61.255
2910.201.62.0/2510.201.62.1 – 10.201.62.12610.201.62.127
3010.201.62.128/2510.201.62.129 – 10.201.62.25410.201.62.255
3110.201.63.0/2510.201.63.1 – 10.201.63.12610.201.63.127
3210.201.63.128/2510.201.63.129 – 10.201.63.25410.201.63.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /20
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,0941
/21255.255.248.02,0482,0462 split →
/22255.255.252.01,0241,0224 split →
/23255.255.254.05125108 split →
/24255.255.255.025625416 split →
/25255.255.255.12812812632 split →
/26255.255.255.192646264 split →
/27255.255.255.2243230128 split →
/28255.255.255.2401614256 split →
/29255.255.255.24886512 split →
/30255.255.255.252421,024 split →
/31255.255.255.254222,048 split →
/32255.255.255.255114,096 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →