ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.201.0.0/19
network10.201.0.0/19
broadcast10.201.31.255
first host10.201.0.1
last host10.201.31.254
subnet mask255.255.224.0
wildcard0.0.31.255
addresses8,192
usable hosts8,190
classA
ipcalc 10.201.0.0/19
address00001010.11001001.00000000.00000000
subnet mask11111111.11111111.11100000.00000000
network00001010.11001001.00000000.00000000
broadcast00001010.11001001.00011111.11111111
green = network part, grey = host part
hex0x0ac90000
decimal180944896
reverse dns0.0.201.10.in-addr.arpa
ipv4-mapped::ffff:ac9:0

/19 split into /25 · 64 subnets

close ×
#networkhost rangebroadcast
110.201.0.0/2510.201.0.1 – 10.201.0.12610.201.0.127
210.201.0.128/2510.201.0.129 – 10.201.0.25410.201.0.255
310.201.1.0/2510.201.1.1 – 10.201.1.12610.201.1.127
410.201.1.128/2510.201.1.129 – 10.201.1.25410.201.1.255
510.201.2.0/2510.201.2.1 – 10.201.2.12610.201.2.127
610.201.2.128/2510.201.2.129 – 10.201.2.25410.201.2.255
710.201.3.0/2510.201.3.1 – 10.201.3.12610.201.3.127
810.201.3.128/2510.201.3.129 – 10.201.3.25410.201.3.255
910.201.4.0/2510.201.4.1 – 10.201.4.12610.201.4.127
1010.201.4.128/2510.201.4.129 – 10.201.4.25410.201.4.255
1110.201.5.0/2510.201.5.1 – 10.201.5.12610.201.5.127
1210.201.5.128/2510.201.5.129 – 10.201.5.25410.201.5.255
1310.201.6.0/2510.201.6.1 – 10.201.6.12610.201.6.127
1410.201.6.128/2510.201.6.129 – 10.201.6.25410.201.6.255
1510.201.7.0/2510.201.7.1 – 10.201.7.12610.201.7.127
1610.201.7.128/2510.201.7.129 – 10.201.7.25410.201.7.255
1710.201.8.0/2510.201.8.1 – 10.201.8.12610.201.8.127
1810.201.8.128/2510.201.8.129 – 10.201.8.25410.201.8.255
1910.201.9.0/2510.201.9.1 – 10.201.9.12610.201.9.127
2010.201.9.128/2510.201.9.129 – 10.201.9.25410.201.9.255
2110.201.10.0/2510.201.10.1 – 10.201.10.12610.201.10.127
2210.201.10.128/2510.201.10.129 – 10.201.10.25410.201.10.255
2310.201.11.0/2510.201.11.1 – 10.201.11.12610.201.11.127
2410.201.11.128/2510.201.11.129 – 10.201.11.25410.201.11.255
2510.201.12.0/2510.201.12.1 – 10.201.12.12610.201.12.127
2610.201.12.128/2510.201.12.129 – 10.201.12.25410.201.12.255
2710.201.13.0/2510.201.13.1 – 10.201.13.12610.201.13.127
2810.201.13.128/2510.201.13.129 – 10.201.13.25410.201.13.255
2910.201.14.0/2510.201.14.1 – 10.201.14.12610.201.14.127
3010.201.14.128/2510.201.14.129 – 10.201.14.25410.201.14.255
3110.201.15.0/2510.201.15.1 – 10.201.15.12610.201.15.127
3210.201.15.128/2510.201.15.129 – 10.201.15.25410.201.15.255
3310.201.16.0/2510.201.16.1 – 10.201.16.12610.201.16.127
3410.201.16.128/2510.201.16.129 – 10.201.16.25410.201.16.255
3510.201.17.0/2510.201.17.1 – 10.201.17.12610.201.17.127
3610.201.17.128/2510.201.17.129 – 10.201.17.25410.201.17.255
3710.201.18.0/2510.201.18.1 – 10.201.18.12610.201.18.127
3810.201.18.128/2510.201.18.129 – 10.201.18.25410.201.18.255
3910.201.19.0/2510.201.19.1 – 10.201.19.12610.201.19.127
4010.201.19.128/2510.201.19.129 – 10.201.19.25410.201.19.255
4110.201.20.0/2510.201.20.1 – 10.201.20.12610.201.20.127
4210.201.20.128/2510.201.20.129 – 10.201.20.25410.201.20.255
4310.201.21.0/2510.201.21.1 – 10.201.21.12610.201.21.127
4410.201.21.128/2510.201.21.129 – 10.201.21.25410.201.21.255
4510.201.22.0/2510.201.22.1 – 10.201.22.12610.201.22.127
4610.201.22.128/2510.201.22.129 – 10.201.22.25410.201.22.255
4710.201.23.0/2510.201.23.1 – 10.201.23.12610.201.23.127
4810.201.23.128/2510.201.23.129 – 10.201.23.25410.201.23.255
4910.201.24.0/2510.201.24.1 – 10.201.24.12610.201.24.127
5010.201.24.128/2510.201.24.129 – 10.201.24.25410.201.24.255
5110.201.25.0/2510.201.25.1 – 10.201.25.12610.201.25.127
5210.201.25.128/2510.201.25.129 – 10.201.25.25410.201.25.255
5310.201.26.0/2510.201.26.1 – 10.201.26.12610.201.26.127
5410.201.26.128/2510.201.26.129 – 10.201.26.25410.201.26.255
5510.201.27.0/2510.201.27.1 – 10.201.27.12610.201.27.127
5610.201.27.128/2510.201.27.129 – 10.201.27.25410.201.27.255
5710.201.28.0/2510.201.28.1 – 10.201.28.12610.201.28.127
5810.201.28.128/2510.201.28.129 – 10.201.28.25410.201.28.255
5910.201.29.0/2510.201.29.1 – 10.201.29.12610.201.29.127
6010.201.29.128/2510.201.29.129 – 10.201.29.25410.201.29.255
6110.201.30.0/2510.201.30.1 – 10.201.30.12610.201.30.127
6210.201.30.128/2510.201.30.129 – 10.201.30.25410.201.30.255
6310.201.31.0/2510.201.31.1 – 10.201.31.12610.201.31.127
6410.201.31.128/2510.201.31.129 – 10.201.31.25410.201.31.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /19
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,1901
/20255.255.240.04,0964,0942 split →
/21255.255.248.02,0482,0464 split →
/22255.255.252.01,0241,0228 split →
/23255.255.254.051251016 split →
/24255.255.255.025625432 split →
/25255.255.255.12812812664 split →
/26255.255.255.1926462128 split →
/27255.255.255.2243230256 split →
/28255.255.255.2401614512 split →
/29255.255.255.248861,024 split →
/30255.255.255.252422,048 split →
/31255.255.255.254224,096 split →
/32255.255.255.255118,192 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →