ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.2.60.192/27
network10.2.60.192/27
broadcast10.2.60.223
first host10.2.60.193
last host10.2.60.222
subnet mask255.255.255.224
wildcard0.0.0.31
addresses32
usable hosts30
classA
ipcalc 10.2.60.192/27
address00001010.00000010.00111100.11000000
subnet mask11111111.11111111.11111111.11100000
network00001010.00000010.00111100.11000000
broadcast00001010.00000010.00111100.11011111
green = network part, grey = host part
hex0x0a023cc0
decimal167918784
reverse dns192.60.2.10.in-addr.arpa
ipv4-mapped::ffff:a02:3cc0

/27 split into /32 · 32 subnets

close ×
#networkhost rangebroadcast
110.2.60.192/3210.2.60.192 – 10.2.60.19210.2.60.192
210.2.60.193/3210.2.60.193 – 10.2.60.19310.2.60.193
310.2.60.194/3210.2.60.194 – 10.2.60.19410.2.60.194
410.2.60.195/3210.2.60.195 – 10.2.60.19510.2.60.195
510.2.60.196/3210.2.60.196 – 10.2.60.19610.2.60.196
610.2.60.197/3210.2.60.197 – 10.2.60.19710.2.60.197
710.2.60.198/3210.2.60.198 – 10.2.60.19810.2.60.198
810.2.60.199/3210.2.60.199 – 10.2.60.19910.2.60.199
910.2.60.200/3210.2.60.200 – 10.2.60.20010.2.60.200
1010.2.60.201/3210.2.60.201 – 10.2.60.20110.2.60.201
1110.2.60.202/3210.2.60.202 – 10.2.60.20210.2.60.202
1210.2.60.203/3210.2.60.203 – 10.2.60.20310.2.60.203
1310.2.60.204/3210.2.60.204 – 10.2.60.20410.2.60.204
1410.2.60.205/3210.2.60.205 – 10.2.60.20510.2.60.205
1510.2.60.206/3210.2.60.206 – 10.2.60.20610.2.60.206
1610.2.60.207/3210.2.60.207 – 10.2.60.20710.2.60.207
1710.2.60.208/3210.2.60.208 – 10.2.60.20810.2.60.208
1810.2.60.209/3210.2.60.209 – 10.2.60.20910.2.60.209
1910.2.60.210/3210.2.60.210 – 10.2.60.21010.2.60.210
2010.2.60.211/3210.2.60.211 – 10.2.60.21110.2.60.211
2110.2.60.212/3210.2.60.212 – 10.2.60.21210.2.60.212
2210.2.60.213/3210.2.60.213 – 10.2.60.21310.2.60.213
2310.2.60.214/3210.2.60.214 – 10.2.60.21410.2.60.214
2410.2.60.215/3210.2.60.215 – 10.2.60.21510.2.60.215
2510.2.60.216/3210.2.60.216 – 10.2.60.21610.2.60.216
2610.2.60.217/3210.2.60.217 – 10.2.60.21710.2.60.217
2710.2.60.218/3210.2.60.218 – 10.2.60.21810.2.60.218
2810.2.60.219/3210.2.60.219 – 10.2.60.21910.2.60.219
2910.2.60.220/3210.2.60.220 – 10.2.60.22010.2.60.220
3010.2.60.221/3210.2.60.221 – 10.2.60.22110.2.60.221
3110.2.60.222/3210.2.60.222 – 10.2.60.22210.2.60.222
3210.2.60.223/3210.2.60.223 – 10.2.60.22310.2.60.223
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /27
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.1926462-
/27255.255.255.22432301
/28255.255.255.24016142 split →
/29255.255.255.248864 split →
/30255.255.255.252428 split →
/31255.255.255.2542216 split →
/32255.255.255.2551132 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →