ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.2.5.0/25
network10.2.5.0/25
broadcast10.2.5.127
first host10.2.5.1
last host10.2.5.126
subnet mask255.255.255.128
wildcard0.0.0.127
addresses128
usable hosts126
classA
ipcalc 10.2.5.0/25
address00001010.00000010.00000101.00000000
subnet mask11111111.11111111.11111111.10000000
network00001010.00000010.00000101.00000000
broadcast00001010.00000010.00000101.01111111
green = network part, grey = host part
hex0x0a020500
decimal167904512
reverse dns0.5.2.10.in-addr.arpa
ipv4-mapped::ffff:a02:500

/25 split into /31 · 64 subnets

close ×
#networkhost rangebroadcast
110.2.5.0/3110.2.5.0 – 10.2.5.110.2.5.1
210.2.5.2/3110.2.5.2 – 10.2.5.310.2.5.3
310.2.5.4/3110.2.5.4 – 10.2.5.510.2.5.5
410.2.5.6/3110.2.5.6 – 10.2.5.710.2.5.7
510.2.5.8/3110.2.5.8 – 10.2.5.910.2.5.9
610.2.5.10/3110.2.5.10 – 10.2.5.1110.2.5.11
710.2.5.12/3110.2.5.12 – 10.2.5.1310.2.5.13
810.2.5.14/3110.2.5.14 – 10.2.5.1510.2.5.15
910.2.5.16/3110.2.5.16 – 10.2.5.1710.2.5.17
1010.2.5.18/3110.2.5.18 – 10.2.5.1910.2.5.19
1110.2.5.20/3110.2.5.20 – 10.2.5.2110.2.5.21
1210.2.5.22/3110.2.5.22 – 10.2.5.2310.2.5.23
1310.2.5.24/3110.2.5.24 – 10.2.5.2510.2.5.25
1410.2.5.26/3110.2.5.26 – 10.2.5.2710.2.5.27
1510.2.5.28/3110.2.5.28 – 10.2.5.2910.2.5.29
1610.2.5.30/3110.2.5.30 – 10.2.5.3110.2.5.31
1710.2.5.32/3110.2.5.32 – 10.2.5.3310.2.5.33
1810.2.5.34/3110.2.5.34 – 10.2.5.3510.2.5.35
1910.2.5.36/3110.2.5.36 – 10.2.5.3710.2.5.37
2010.2.5.38/3110.2.5.38 – 10.2.5.3910.2.5.39
2110.2.5.40/3110.2.5.40 – 10.2.5.4110.2.5.41
2210.2.5.42/3110.2.5.42 – 10.2.5.4310.2.5.43
2310.2.5.44/3110.2.5.44 – 10.2.5.4510.2.5.45
2410.2.5.46/3110.2.5.46 – 10.2.5.4710.2.5.47
2510.2.5.48/3110.2.5.48 – 10.2.5.4910.2.5.49
2610.2.5.50/3110.2.5.50 – 10.2.5.5110.2.5.51
2710.2.5.52/3110.2.5.52 – 10.2.5.5310.2.5.53
2810.2.5.54/3110.2.5.54 – 10.2.5.5510.2.5.55
2910.2.5.56/3110.2.5.56 – 10.2.5.5710.2.5.57
3010.2.5.58/3110.2.5.58 – 10.2.5.5910.2.5.59
3110.2.5.60/3110.2.5.60 – 10.2.5.6110.2.5.61
3210.2.5.62/3110.2.5.62 – 10.2.5.6310.2.5.63
3310.2.5.64/3110.2.5.64 – 10.2.5.6510.2.5.65
3410.2.5.66/3110.2.5.66 – 10.2.5.6710.2.5.67
3510.2.5.68/3110.2.5.68 – 10.2.5.6910.2.5.69
3610.2.5.70/3110.2.5.70 – 10.2.5.7110.2.5.71
3710.2.5.72/3110.2.5.72 – 10.2.5.7310.2.5.73
3810.2.5.74/3110.2.5.74 – 10.2.5.7510.2.5.75
3910.2.5.76/3110.2.5.76 – 10.2.5.7710.2.5.77
4010.2.5.78/3110.2.5.78 – 10.2.5.7910.2.5.79
4110.2.5.80/3110.2.5.80 – 10.2.5.8110.2.5.81
4210.2.5.82/3110.2.5.82 – 10.2.5.8310.2.5.83
4310.2.5.84/3110.2.5.84 – 10.2.5.8510.2.5.85
4410.2.5.86/3110.2.5.86 – 10.2.5.8710.2.5.87
4510.2.5.88/3110.2.5.88 – 10.2.5.8910.2.5.89
4610.2.5.90/3110.2.5.90 – 10.2.5.9110.2.5.91
4710.2.5.92/3110.2.5.92 – 10.2.5.9310.2.5.93
4810.2.5.94/3110.2.5.94 – 10.2.5.9510.2.5.95
4910.2.5.96/3110.2.5.96 – 10.2.5.9710.2.5.97
5010.2.5.98/3110.2.5.98 – 10.2.5.9910.2.5.99
5110.2.5.100/3110.2.5.100 – 10.2.5.10110.2.5.101
5210.2.5.102/3110.2.5.102 – 10.2.5.10310.2.5.103
5310.2.5.104/3110.2.5.104 – 10.2.5.10510.2.5.105
5410.2.5.106/3110.2.5.106 – 10.2.5.10710.2.5.107
5510.2.5.108/3110.2.5.108 – 10.2.5.10910.2.5.109
5610.2.5.110/3110.2.5.110 – 10.2.5.11110.2.5.111
5710.2.5.112/3110.2.5.112 – 10.2.5.11310.2.5.113
5810.2.5.114/3110.2.5.114 – 10.2.5.11510.2.5.115
5910.2.5.116/3110.2.5.116 – 10.2.5.11710.2.5.117
6010.2.5.118/3110.2.5.118 – 10.2.5.11910.2.5.119
6110.2.5.120/3110.2.5.120 – 10.2.5.12110.2.5.121
6210.2.5.122/3110.2.5.122 – 10.2.5.12310.2.5.123
6310.2.5.124/3110.2.5.124 – 10.2.5.12510.2.5.125
6410.2.5.126/3110.2.5.126 – 10.2.5.12710.2.5.127
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /25
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.1281281261
/26255.255.255.19264622 split →
/27255.255.255.22432304 split →
/28255.255.255.24016148 split →
/29255.255.255.2488616 split →
/30255.255.255.2524232 split →
/31255.255.255.2542264 split →
/32255.255.255.25511128 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →