ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.2.47.192/26
network10.2.47.192/26
broadcast10.2.47.255
first host10.2.47.193
last host10.2.47.254
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classA
ipcalc 10.2.47.192/26
address00001010.00000010.00101111.11000000
subnet mask11111111.11111111.11111111.11000000
network00001010.00000010.00101111.11000000
broadcast00001010.00000010.00101111.11111111
green = network part, grey = host part
hex0x0a022fc0
decimal167915456
reverse dns192.47.2.10.in-addr.arpa
ipv4-mapped::ffff:a02:2fc0

/26 split into /31 · 32 subnets

close ×
#networkhost rangebroadcast
110.2.47.192/3110.2.47.192 – 10.2.47.19310.2.47.193
210.2.47.194/3110.2.47.194 – 10.2.47.19510.2.47.195
310.2.47.196/3110.2.47.196 – 10.2.47.19710.2.47.197
410.2.47.198/3110.2.47.198 – 10.2.47.19910.2.47.199
510.2.47.200/3110.2.47.200 – 10.2.47.20110.2.47.201
610.2.47.202/3110.2.47.202 – 10.2.47.20310.2.47.203
710.2.47.204/3110.2.47.204 – 10.2.47.20510.2.47.205
810.2.47.206/3110.2.47.206 – 10.2.47.20710.2.47.207
910.2.47.208/3110.2.47.208 – 10.2.47.20910.2.47.209
1010.2.47.210/3110.2.47.210 – 10.2.47.21110.2.47.211
1110.2.47.212/3110.2.47.212 – 10.2.47.21310.2.47.213
1210.2.47.214/3110.2.47.214 – 10.2.47.21510.2.47.215
1310.2.47.216/3110.2.47.216 – 10.2.47.21710.2.47.217
1410.2.47.218/3110.2.47.218 – 10.2.47.21910.2.47.219
1510.2.47.220/3110.2.47.220 – 10.2.47.22110.2.47.221
1610.2.47.222/3110.2.47.222 – 10.2.47.22310.2.47.223
1710.2.47.224/3110.2.47.224 – 10.2.47.22510.2.47.225
1810.2.47.226/3110.2.47.226 – 10.2.47.22710.2.47.227
1910.2.47.228/3110.2.47.228 – 10.2.47.22910.2.47.229
2010.2.47.230/3110.2.47.230 – 10.2.47.23110.2.47.231
2110.2.47.232/3110.2.47.232 – 10.2.47.23310.2.47.233
2210.2.47.234/3110.2.47.234 – 10.2.47.23510.2.47.235
2310.2.47.236/3110.2.47.236 – 10.2.47.23710.2.47.237
2410.2.47.238/3110.2.47.238 – 10.2.47.23910.2.47.239
2510.2.47.240/3110.2.47.240 – 10.2.47.24110.2.47.241
2610.2.47.242/3110.2.47.242 – 10.2.47.24310.2.47.243
2710.2.47.244/3110.2.47.244 – 10.2.47.24510.2.47.245
2810.2.47.246/3110.2.47.246 – 10.2.47.24710.2.47.247
2910.2.47.248/3110.2.47.248 – 10.2.47.24910.2.47.249
3010.2.47.250/3110.2.47.250 – 10.2.47.25110.2.47.251
3110.2.47.252/3110.2.47.252 – 10.2.47.25310.2.47.253
3210.2.47.254/3110.2.47.254 – 10.2.47.25510.2.47.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /26
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.19264621
/27255.255.255.22432302 split →
/28255.255.255.24016144 split →
/29255.255.255.248868 split →
/30255.255.255.2524216 split →
/31255.255.255.2542232 split →
/32255.255.255.2551164 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →