ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.2.43.64/27
network10.2.43.64/27
broadcast10.2.43.95
first host10.2.43.65
last host10.2.43.94
subnet mask255.255.255.224
wildcard0.0.0.31
addresses32
usable hosts30
classA
ipcalc 10.2.43.64/27
address00001010.00000010.00101011.01000000
subnet mask11111111.11111111.11111111.11100000
network00001010.00000010.00101011.01000000
broadcast00001010.00000010.00101011.01011111
green = network part, grey = host part
hex0x0a022b40
decimal167914304
reverse dns64.43.2.10.in-addr.arpa
ipv4-mapped::ffff:a02:2b40

/27 split into /32 · 32 subnets

close ×
#networkhost rangebroadcast
110.2.43.64/3210.2.43.64 – 10.2.43.6410.2.43.64
210.2.43.65/3210.2.43.65 – 10.2.43.6510.2.43.65
310.2.43.66/3210.2.43.66 – 10.2.43.6610.2.43.66
410.2.43.67/3210.2.43.67 – 10.2.43.6710.2.43.67
510.2.43.68/3210.2.43.68 – 10.2.43.6810.2.43.68
610.2.43.69/3210.2.43.69 – 10.2.43.6910.2.43.69
710.2.43.70/3210.2.43.70 – 10.2.43.7010.2.43.70
810.2.43.71/3210.2.43.71 – 10.2.43.7110.2.43.71
910.2.43.72/3210.2.43.72 – 10.2.43.7210.2.43.72
1010.2.43.73/3210.2.43.73 – 10.2.43.7310.2.43.73
1110.2.43.74/3210.2.43.74 – 10.2.43.7410.2.43.74
1210.2.43.75/3210.2.43.75 – 10.2.43.7510.2.43.75
1310.2.43.76/3210.2.43.76 – 10.2.43.7610.2.43.76
1410.2.43.77/3210.2.43.77 – 10.2.43.7710.2.43.77
1510.2.43.78/3210.2.43.78 – 10.2.43.7810.2.43.78
1610.2.43.79/3210.2.43.79 – 10.2.43.7910.2.43.79
1710.2.43.80/3210.2.43.80 – 10.2.43.8010.2.43.80
1810.2.43.81/3210.2.43.81 – 10.2.43.8110.2.43.81
1910.2.43.82/3210.2.43.82 – 10.2.43.8210.2.43.82
2010.2.43.83/3210.2.43.83 – 10.2.43.8310.2.43.83
2110.2.43.84/3210.2.43.84 – 10.2.43.8410.2.43.84
2210.2.43.85/3210.2.43.85 – 10.2.43.8510.2.43.85
2310.2.43.86/3210.2.43.86 – 10.2.43.8610.2.43.86
2410.2.43.87/3210.2.43.87 – 10.2.43.8710.2.43.87
2510.2.43.88/3210.2.43.88 – 10.2.43.8810.2.43.88
2610.2.43.89/3210.2.43.89 – 10.2.43.8910.2.43.89
2710.2.43.90/3210.2.43.90 – 10.2.43.9010.2.43.90
2810.2.43.91/3210.2.43.91 – 10.2.43.9110.2.43.91
2910.2.43.92/3210.2.43.92 – 10.2.43.9210.2.43.92
3010.2.43.93/3210.2.43.93 – 10.2.43.9310.2.43.93
3110.2.43.94/3210.2.43.94 – 10.2.43.9410.2.43.94
3210.2.43.95/3210.2.43.95 – 10.2.43.9510.2.43.95
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /27
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.1926462-
/27255.255.255.22432301
/28255.255.255.24016142 split →
/29255.255.255.248864 split →
/30255.255.255.252428 split →
/31255.255.255.2542216 split →
/32255.255.255.2551132 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →