IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

Try:192.168.1.10/24 10.0.0.0/8 172.16.5.4/20 203.0.113.9/29

IPv6 calculator →

private IP (RFC 1918)10.2.36.0/24

network10.2.36.0/24

broadcast10.2.36.255

first host10.2.36.1

last host10.2.36.254

subnet mask255.255.255.0

wildcard0.0.0.255

addresses256

usable hosts254

classA

ipcalc 10.2.36.0/24

address00001010.00000010.00100100.00000000

subnet mask11111111.11111111.11111111.00000000

network00001010.00000010.00100100.00000000

broadcast00001010.00000010.00100100.11111111

green = network part, grey = host part

hex0x0a022400

decimal167912448

reverse dns0.36.2.10.in-addr.arpa

ipv4-mapped::ffff:a02:2400

/24 split into /30 · 64 subnets

close ×

#	network	host range	broadcast
1	10.2.36.0/30	10.2.36.1 – 10.2.36.2	10.2.36.3
2	10.2.36.4/30	10.2.36.5 – 10.2.36.6	10.2.36.7
3	10.2.36.8/30	10.2.36.9 – 10.2.36.10	10.2.36.11
4	10.2.36.12/30	10.2.36.13 – 10.2.36.14	10.2.36.15
5	10.2.36.16/30	10.2.36.17 – 10.2.36.18	10.2.36.19
6	10.2.36.20/30	10.2.36.21 – 10.2.36.22	10.2.36.23
7	10.2.36.24/30	10.2.36.25 – 10.2.36.26	10.2.36.27
8	10.2.36.28/30	10.2.36.29 – 10.2.36.30	10.2.36.31
9	10.2.36.32/30	10.2.36.33 – 10.2.36.34	10.2.36.35
10	10.2.36.36/30	10.2.36.37 – 10.2.36.38	10.2.36.39
11	10.2.36.40/30	10.2.36.41 – 10.2.36.42	10.2.36.43
12	10.2.36.44/30	10.2.36.45 – 10.2.36.46	10.2.36.47
13	10.2.36.48/30	10.2.36.49 – 10.2.36.50	10.2.36.51
14	10.2.36.52/30	10.2.36.53 – 10.2.36.54	10.2.36.55
15	10.2.36.56/30	10.2.36.57 – 10.2.36.58	10.2.36.59
16	10.2.36.60/30	10.2.36.61 – 10.2.36.62	10.2.36.63
17	10.2.36.64/30	10.2.36.65 – 10.2.36.66	10.2.36.67
18	10.2.36.68/30	10.2.36.69 – 10.2.36.70	10.2.36.71
19	10.2.36.72/30	10.2.36.73 – 10.2.36.74	10.2.36.75
20	10.2.36.76/30	10.2.36.77 – 10.2.36.78	10.2.36.79
21	10.2.36.80/30	10.2.36.81 – 10.2.36.82	10.2.36.83
22	10.2.36.84/30	10.2.36.85 – 10.2.36.86	10.2.36.87
23	10.2.36.88/30	10.2.36.89 – 10.2.36.90	10.2.36.91
24	10.2.36.92/30	10.2.36.93 – 10.2.36.94	10.2.36.95
25	10.2.36.96/30	10.2.36.97 – 10.2.36.98	10.2.36.99
26	10.2.36.100/30	10.2.36.101 – 10.2.36.102	10.2.36.103
27	10.2.36.104/30	10.2.36.105 – 10.2.36.106	10.2.36.107
28	10.2.36.108/30	10.2.36.109 – 10.2.36.110	10.2.36.111
29	10.2.36.112/30	10.2.36.113 – 10.2.36.114	10.2.36.115
30	10.2.36.116/30	10.2.36.117 – 10.2.36.118	10.2.36.119
31	10.2.36.120/30	10.2.36.121 – 10.2.36.122	10.2.36.123
32	10.2.36.124/30	10.2.36.125 – 10.2.36.126	10.2.36.127
33	10.2.36.128/30	10.2.36.129 – 10.2.36.130	10.2.36.131
34	10.2.36.132/30	10.2.36.133 – 10.2.36.134	10.2.36.135
35	10.2.36.136/30	10.2.36.137 – 10.2.36.138	10.2.36.139
36	10.2.36.140/30	10.2.36.141 – 10.2.36.142	10.2.36.143
37	10.2.36.144/30	10.2.36.145 – 10.2.36.146	10.2.36.147
38	10.2.36.148/30	10.2.36.149 – 10.2.36.150	10.2.36.151
39	10.2.36.152/30	10.2.36.153 – 10.2.36.154	10.2.36.155
40	10.2.36.156/30	10.2.36.157 – 10.2.36.158	10.2.36.159
41	10.2.36.160/30	10.2.36.161 – 10.2.36.162	10.2.36.163
42	10.2.36.164/30	10.2.36.165 – 10.2.36.166	10.2.36.167
43	10.2.36.168/30	10.2.36.169 – 10.2.36.170	10.2.36.171
44	10.2.36.172/30	10.2.36.173 – 10.2.36.174	10.2.36.175
45	10.2.36.176/30	10.2.36.177 – 10.2.36.178	10.2.36.179
46	10.2.36.180/30	10.2.36.181 – 10.2.36.182	10.2.36.183
47	10.2.36.184/30	10.2.36.185 – 10.2.36.186	10.2.36.187
48	10.2.36.188/30	10.2.36.189 – 10.2.36.190	10.2.36.191
49	10.2.36.192/30	10.2.36.193 – 10.2.36.194	10.2.36.195
50	10.2.36.196/30	10.2.36.197 – 10.2.36.198	10.2.36.199
51	10.2.36.200/30	10.2.36.201 – 10.2.36.202	10.2.36.203
52	10.2.36.204/30	10.2.36.205 – 10.2.36.206	10.2.36.207
53	10.2.36.208/30	10.2.36.209 – 10.2.36.210	10.2.36.211
54	10.2.36.212/30	10.2.36.213 – 10.2.36.214	10.2.36.215
55	10.2.36.216/30	10.2.36.217 – 10.2.36.218	10.2.36.219
56	10.2.36.220/30	10.2.36.221 – 10.2.36.222	10.2.36.223
57	10.2.36.224/30	10.2.36.225 – 10.2.36.226	10.2.36.227
58	10.2.36.228/30	10.2.36.229 – 10.2.36.230	10.2.36.231
59	10.2.36.232/30	10.2.36.233 – 10.2.36.234	10.2.36.235
60	10.2.36.236/30	10.2.36.237 – 10.2.36.238	10.2.36.239
61	10.2.36.240/30	10.2.36.241 – 10.2.36.242	10.2.36.243
62	10.2.36.244/30	10.2.36.245 – 10.2.36.246	10.2.36.247
63	10.2.36.248/30	10.2.36.249 – 10.2.36.250	10.2.36.251
64	10.2.36.252/30	10.2.36.253 – 10.2.36.254	10.2.36.255

01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefix	subnet mask	addresses	hosts	in your /24
/0	0.0.0.0	4,294,967,296	4,294,967,294	-
/1	128.0.0.0	2,147,483,648	2,147,483,646	-
/2	192.0.0.0	1,073,741,824	1,073,741,822	-
/3	224.0.0.0	536,870,912	536,870,910	-
/4	240.0.0.0	268,435,456	268,435,454	-
/5	248.0.0.0	134,217,728	134,217,726	-
/6	252.0.0.0	67,108,864	67,108,862	-
/7	254.0.0.0	33,554,432	33,554,430	-
/8	255.0.0.0	16,777,216	16,777,214	-
/9	255.128.0.0	8,388,608	8,388,606	-
/10	255.192.0.0	4,194,304	4,194,302	-
/11	255.224.0.0	2,097,152	2,097,150	-
/12	255.240.0.0	1,048,576	1,048,574	-
/13	255.248.0.0	524,288	524,286	-
/14	255.252.0.0	262,144	262,142	-
/15	255.254.0.0	131,072	131,070	-
/16	255.255.0.0	65,536	65,534	-
/17	255.255.128.0	32,768	32,766	-
/18	255.255.192.0	16,384	16,382	-
/19	255.255.224.0	8,192	8,190	-
/20	255.255.240.0	4,096	4,094	-
/21	255.255.248.0	2,048	2,046	-
/22	255.255.252.0	1,024	1,022	-
/23	255.255.254.0	512	510	-
/24	255.255.255.0	256	254	1
/25	255.255.255.128	128	126	2 split →
/26	255.255.255.192	64	62	4 split →
/27	255.255.255.224	32	30	8 split →
/28	255.255.255.240	16	14	16 split →
/29	255.255.255.248	8	6	32 split →
/30	255.255.255.252	4	2	64 split →
/31	255.255.255.254	2	2	128 split →
/32	255.255.255.255	1	1	256 split →

02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →