ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.2.33.0/28
network10.2.33.0/28
broadcast10.2.33.15
first host10.2.33.1
last host10.2.33.14
subnet mask255.255.255.240
wildcard0.0.0.15
addresses16
usable hosts14
classA
ipcalc 10.2.33.0/28
address00001010.00000010.00100001.00000000
subnet mask11111111.11111111.11111111.11110000
network00001010.00000010.00100001.00000000
broadcast00001010.00000010.00100001.00001111
green = network part, grey = host part
hex0x0a022100
decimal167911680
reverse dns0.33.2.10.in-addr.arpa
ipv4-mapped::ffff:a02:2100

/28 split into /32 · 16 subnets

close ×
#networkhost rangebroadcast
110.2.33.0/3210.2.33.0 – 10.2.33.010.2.33.0
210.2.33.1/3210.2.33.1 – 10.2.33.110.2.33.1
310.2.33.2/3210.2.33.2 – 10.2.33.210.2.33.2
410.2.33.3/3210.2.33.3 – 10.2.33.310.2.33.3
510.2.33.4/3210.2.33.4 – 10.2.33.410.2.33.4
610.2.33.5/3210.2.33.5 – 10.2.33.510.2.33.5
710.2.33.6/3210.2.33.6 – 10.2.33.610.2.33.6
810.2.33.7/3210.2.33.7 – 10.2.33.710.2.33.7
910.2.33.8/3210.2.33.8 – 10.2.33.810.2.33.8
1010.2.33.9/3210.2.33.9 – 10.2.33.910.2.33.9
1110.2.33.10/3210.2.33.10 – 10.2.33.1010.2.33.10
1210.2.33.11/3210.2.33.11 – 10.2.33.1110.2.33.11
1310.2.33.12/3210.2.33.12 – 10.2.33.1210.2.33.12
1410.2.33.13/3210.2.33.13 – 10.2.33.1310.2.33.13
1510.2.33.14/3210.2.33.14 – 10.2.33.1410.2.33.14
1610.2.33.15/3210.2.33.15 – 10.2.33.1510.2.33.15
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /28
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.1926462-
/27255.255.255.2243230-
/28255.255.255.24016141
/29255.255.255.248862 split →
/30255.255.255.252424 split →
/31255.255.255.254228 split →
/32255.255.255.2551116 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →