ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.2.32.0/23
network10.2.32.0/23
broadcast10.2.33.255
first host10.2.32.1
last host10.2.33.254
subnet mask255.255.254.0
wildcard0.0.1.255
addresses512
usable hosts510
classA
ipcalc 10.2.32.0/23
address00001010.00000010.00100000.00000000
subnet mask11111111.11111111.11111110.00000000
network00001010.00000010.00100000.00000000
broadcast00001010.00000010.00100001.11111111
green = network part, grey = host part
hex0x0a022000
decimal167911424
reverse dns0.32.2.10.in-addr.arpa
ipv4-mapped::ffff:a02:2000

/23 split into /28 · 32 subnets

close ×
#networkhost rangebroadcast
110.2.32.0/2810.2.32.1 – 10.2.32.1410.2.32.15
210.2.32.16/2810.2.32.17 – 10.2.32.3010.2.32.31
310.2.32.32/2810.2.32.33 – 10.2.32.4610.2.32.47
410.2.32.48/2810.2.32.49 – 10.2.32.6210.2.32.63
510.2.32.64/2810.2.32.65 – 10.2.32.7810.2.32.79
610.2.32.80/2810.2.32.81 – 10.2.32.9410.2.32.95
710.2.32.96/2810.2.32.97 – 10.2.32.11010.2.32.111
810.2.32.112/2810.2.32.113 – 10.2.32.12610.2.32.127
910.2.32.128/2810.2.32.129 – 10.2.32.14210.2.32.143
1010.2.32.144/2810.2.32.145 – 10.2.32.15810.2.32.159
1110.2.32.160/2810.2.32.161 – 10.2.32.17410.2.32.175
1210.2.32.176/2810.2.32.177 – 10.2.32.19010.2.32.191
1310.2.32.192/2810.2.32.193 – 10.2.32.20610.2.32.207
1410.2.32.208/2810.2.32.209 – 10.2.32.22210.2.32.223
1510.2.32.224/2810.2.32.225 – 10.2.32.23810.2.32.239
1610.2.32.240/2810.2.32.241 – 10.2.32.25410.2.32.255
1710.2.33.0/2810.2.33.1 – 10.2.33.1410.2.33.15
1810.2.33.16/2810.2.33.17 – 10.2.33.3010.2.33.31
1910.2.33.32/2810.2.33.33 – 10.2.33.4610.2.33.47
2010.2.33.48/2810.2.33.49 – 10.2.33.6210.2.33.63
2110.2.33.64/2810.2.33.65 – 10.2.33.7810.2.33.79
2210.2.33.80/2810.2.33.81 – 10.2.33.9410.2.33.95
2310.2.33.96/2810.2.33.97 – 10.2.33.11010.2.33.111
2410.2.33.112/2810.2.33.113 – 10.2.33.12610.2.33.127
2510.2.33.128/2810.2.33.129 – 10.2.33.14210.2.33.143
2610.2.33.144/2810.2.33.145 – 10.2.33.15810.2.33.159
2710.2.33.160/2810.2.33.161 – 10.2.33.17410.2.33.175
2810.2.33.176/2810.2.33.177 – 10.2.33.19010.2.33.191
2910.2.33.192/2810.2.33.193 – 10.2.33.20610.2.33.207
3010.2.33.208/2810.2.33.209 – 10.2.33.22210.2.33.223
3110.2.33.224/2810.2.33.225 – 10.2.33.23810.2.33.239
3210.2.33.240/2810.2.33.241 – 10.2.33.25410.2.33.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /23
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.05125101
/24255.255.255.02562542 split →
/25255.255.255.1281281264 split →
/26255.255.255.19264628 split →
/27255.255.255.224323016 split →
/28255.255.255.240161432 split →
/29255.255.255.2488664 split →
/30255.255.255.25242128 split →
/31255.255.255.25422256 split →
/32255.255.255.25511512 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →