ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.2.248.192/26
network10.2.248.192/26
broadcast10.2.248.255
first host10.2.248.193
last host10.2.248.254
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classA
ipcalc 10.2.248.192/26
address00001010.00000010.11111000.11000000
subnet mask11111111.11111111.11111111.11000000
network00001010.00000010.11111000.11000000
broadcast00001010.00000010.11111000.11111111
green = network part, grey = host part
hex0x0a02f8c0
decimal167966912
reverse dns192.248.2.10.in-addr.arpa
ipv4-mapped::ffff:a02:f8c0

/26 split into /32 · 64 subnets

close ×
#networkhost rangebroadcast
110.2.248.192/3210.2.248.192 – 10.2.248.19210.2.248.192
210.2.248.193/3210.2.248.193 – 10.2.248.19310.2.248.193
310.2.248.194/3210.2.248.194 – 10.2.248.19410.2.248.194
410.2.248.195/3210.2.248.195 – 10.2.248.19510.2.248.195
510.2.248.196/3210.2.248.196 – 10.2.248.19610.2.248.196
610.2.248.197/3210.2.248.197 – 10.2.248.19710.2.248.197
710.2.248.198/3210.2.248.198 – 10.2.248.19810.2.248.198
810.2.248.199/3210.2.248.199 – 10.2.248.19910.2.248.199
910.2.248.200/3210.2.248.200 – 10.2.248.20010.2.248.200
1010.2.248.201/3210.2.248.201 – 10.2.248.20110.2.248.201
1110.2.248.202/3210.2.248.202 – 10.2.248.20210.2.248.202
1210.2.248.203/3210.2.248.203 – 10.2.248.20310.2.248.203
1310.2.248.204/3210.2.248.204 – 10.2.248.20410.2.248.204
1410.2.248.205/3210.2.248.205 – 10.2.248.20510.2.248.205
1510.2.248.206/3210.2.248.206 – 10.2.248.20610.2.248.206
1610.2.248.207/3210.2.248.207 – 10.2.248.20710.2.248.207
1710.2.248.208/3210.2.248.208 – 10.2.248.20810.2.248.208
1810.2.248.209/3210.2.248.209 – 10.2.248.20910.2.248.209
1910.2.248.210/3210.2.248.210 – 10.2.248.21010.2.248.210
2010.2.248.211/3210.2.248.211 – 10.2.248.21110.2.248.211
2110.2.248.212/3210.2.248.212 – 10.2.248.21210.2.248.212
2210.2.248.213/3210.2.248.213 – 10.2.248.21310.2.248.213
2310.2.248.214/3210.2.248.214 – 10.2.248.21410.2.248.214
2410.2.248.215/3210.2.248.215 – 10.2.248.21510.2.248.215
2510.2.248.216/3210.2.248.216 – 10.2.248.21610.2.248.216
2610.2.248.217/3210.2.248.217 – 10.2.248.21710.2.248.217
2710.2.248.218/3210.2.248.218 – 10.2.248.21810.2.248.218
2810.2.248.219/3210.2.248.219 – 10.2.248.21910.2.248.219
2910.2.248.220/3210.2.248.220 – 10.2.248.22010.2.248.220
3010.2.248.221/3210.2.248.221 – 10.2.248.22110.2.248.221
3110.2.248.222/3210.2.248.222 – 10.2.248.22210.2.248.222
3210.2.248.223/3210.2.248.223 – 10.2.248.22310.2.248.223
3310.2.248.224/3210.2.248.224 – 10.2.248.22410.2.248.224
3410.2.248.225/3210.2.248.225 – 10.2.248.22510.2.248.225
3510.2.248.226/3210.2.248.226 – 10.2.248.22610.2.248.226
3610.2.248.227/3210.2.248.227 – 10.2.248.22710.2.248.227
3710.2.248.228/3210.2.248.228 – 10.2.248.22810.2.248.228
3810.2.248.229/3210.2.248.229 – 10.2.248.22910.2.248.229
3910.2.248.230/3210.2.248.230 – 10.2.248.23010.2.248.230
4010.2.248.231/3210.2.248.231 – 10.2.248.23110.2.248.231
4110.2.248.232/3210.2.248.232 – 10.2.248.23210.2.248.232
4210.2.248.233/3210.2.248.233 – 10.2.248.23310.2.248.233
4310.2.248.234/3210.2.248.234 – 10.2.248.23410.2.248.234
4410.2.248.235/3210.2.248.235 – 10.2.248.23510.2.248.235
4510.2.248.236/3210.2.248.236 – 10.2.248.23610.2.248.236
4610.2.248.237/3210.2.248.237 – 10.2.248.23710.2.248.237
4710.2.248.238/3210.2.248.238 – 10.2.248.23810.2.248.238
4810.2.248.239/3210.2.248.239 – 10.2.248.23910.2.248.239
4910.2.248.240/3210.2.248.240 – 10.2.248.24010.2.248.240
5010.2.248.241/3210.2.248.241 – 10.2.248.24110.2.248.241
5110.2.248.242/3210.2.248.242 – 10.2.248.24210.2.248.242
5210.2.248.243/3210.2.248.243 – 10.2.248.24310.2.248.243
5310.2.248.244/3210.2.248.244 – 10.2.248.24410.2.248.244
5410.2.248.245/3210.2.248.245 – 10.2.248.24510.2.248.245
5510.2.248.246/3210.2.248.246 – 10.2.248.24610.2.248.246
5610.2.248.247/3210.2.248.247 – 10.2.248.24710.2.248.247
5710.2.248.248/3210.2.248.248 – 10.2.248.24810.2.248.248
5810.2.248.249/3210.2.248.249 – 10.2.248.24910.2.248.249
5910.2.248.250/3210.2.248.250 – 10.2.248.25010.2.248.250
6010.2.248.251/3210.2.248.251 – 10.2.248.25110.2.248.251
6110.2.248.252/3210.2.248.252 – 10.2.248.25210.2.248.252
6210.2.248.253/3210.2.248.253 – 10.2.248.25310.2.248.253
6310.2.248.254/3210.2.248.254 – 10.2.248.25410.2.248.254
6410.2.248.255/3210.2.248.255 – 10.2.248.25510.2.248.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /26
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.19264621
/27255.255.255.22432302 split →
/28255.255.255.24016144 split →
/29255.255.255.248868 split →
/30255.255.255.2524216 split →
/31255.255.255.2542232 split →
/32255.255.255.2551164 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →