ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.2.248.0/22
network10.2.248.0/22
broadcast10.2.251.255
first host10.2.248.1
last host10.2.251.254
subnet mask255.255.252.0
wildcard0.0.3.255
addresses1,024
usable hosts1,022
classA
ipcalc 10.2.248.0/22
address00001010.00000010.11111000.00000000
subnet mask11111111.11111111.11111100.00000000
network00001010.00000010.11111000.00000000
broadcast00001010.00000010.11111011.11111111
green = network part, grey = host part
hex0x0a02f800
decimal167966720
reverse dns0.248.2.10.in-addr.arpa
ipv4-mapped::ffff:a02:f800

/22 split into /28 · 64 subnets

close ×
#networkhost rangebroadcast
110.2.248.0/2810.2.248.1 – 10.2.248.1410.2.248.15
210.2.248.16/2810.2.248.17 – 10.2.248.3010.2.248.31
310.2.248.32/2810.2.248.33 – 10.2.248.4610.2.248.47
410.2.248.48/2810.2.248.49 – 10.2.248.6210.2.248.63
510.2.248.64/2810.2.248.65 – 10.2.248.7810.2.248.79
610.2.248.80/2810.2.248.81 – 10.2.248.9410.2.248.95
710.2.248.96/2810.2.248.97 – 10.2.248.11010.2.248.111
810.2.248.112/2810.2.248.113 – 10.2.248.12610.2.248.127
910.2.248.128/2810.2.248.129 – 10.2.248.14210.2.248.143
1010.2.248.144/2810.2.248.145 – 10.2.248.15810.2.248.159
1110.2.248.160/2810.2.248.161 – 10.2.248.17410.2.248.175
1210.2.248.176/2810.2.248.177 – 10.2.248.19010.2.248.191
1310.2.248.192/2810.2.248.193 – 10.2.248.20610.2.248.207
1410.2.248.208/2810.2.248.209 – 10.2.248.22210.2.248.223
1510.2.248.224/2810.2.248.225 – 10.2.248.23810.2.248.239
1610.2.248.240/2810.2.248.241 – 10.2.248.25410.2.248.255
1710.2.249.0/2810.2.249.1 – 10.2.249.1410.2.249.15
1810.2.249.16/2810.2.249.17 – 10.2.249.3010.2.249.31
1910.2.249.32/2810.2.249.33 – 10.2.249.4610.2.249.47
2010.2.249.48/2810.2.249.49 – 10.2.249.6210.2.249.63
2110.2.249.64/2810.2.249.65 – 10.2.249.7810.2.249.79
2210.2.249.80/2810.2.249.81 – 10.2.249.9410.2.249.95
2310.2.249.96/2810.2.249.97 – 10.2.249.11010.2.249.111
2410.2.249.112/2810.2.249.113 – 10.2.249.12610.2.249.127
2510.2.249.128/2810.2.249.129 – 10.2.249.14210.2.249.143
2610.2.249.144/2810.2.249.145 – 10.2.249.15810.2.249.159
2710.2.249.160/2810.2.249.161 – 10.2.249.17410.2.249.175
2810.2.249.176/2810.2.249.177 – 10.2.249.19010.2.249.191
2910.2.249.192/2810.2.249.193 – 10.2.249.20610.2.249.207
3010.2.249.208/2810.2.249.209 – 10.2.249.22210.2.249.223
3110.2.249.224/2810.2.249.225 – 10.2.249.23810.2.249.239
3210.2.249.240/2810.2.249.241 – 10.2.249.25410.2.249.255
3310.2.250.0/2810.2.250.1 – 10.2.250.1410.2.250.15
3410.2.250.16/2810.2.250.17 – 10.2.250.3010.2.250.31
3510.2.250.32/2810.2.250.33 – 10.2.250.4610.2.250.47
3610.2.250.48/2810.2.250.49 – 10.2.250.6210.2.250.63
3710.2.250.64/2810.2.250.65 – 10.2.250.7810.2.250.79
3810.2.250.80/2810.2.250.81 – 10.2.250.9410.2.250.95
3910.2.250.96/2810.2.250.97 – 10.2.250.11010.2.250.111
4010.2.250.112/2810.2.250.113 – 10.2.250.12610.2.250.127
4110.2.250.128/2810.2.250.129 – 10.2.250.14210.2.250.143
4210.2.250.144/2810.2.250.145 – 10.2.250.15810.2.250.159
4310.2.250.160/2810.2.250.161 – 10.2.250.17410.2.250.175
4410.2.250.176/2810.2.250.177 – 10.2.250.19010.2.250.191
4510.2.250.192/2810.2.250.193 – 10.2.250.20610.2.250.207
4610.2.250.208/2810.2.250.209 – 10.2.250.22210.2.250.223
4710.2.250.224/2810.2.250.225 – 10.2.250.23810.2.250.239
4810.2.250.240/2810.2.250.241 – 10.2.250.25410.2.250.255
4910.2.251.0/2810.2.251.1 – 10.2.251.1410.2.251.15
5010.2.251.16/2810.2.251.17 – 10.2.251.3010.2.251.31
5110.2.251.32/2810.2.251.33 – 10.2.251.4610.2.251.47
5210.2.251.48/2810.2.251.49 – 10.2.251.6210.2.251.63
5310.2.251.64/2810.2.251.65 – 10.2.251.7810.2.251.79
5410.2.251.80/2810.2.251.81 – 10.2.251.9410.2.251.95
5510.2.251.96/2810.2.251.97 – 10.2.251.11010.2.251.111
5610.2.251.112/2810.2.251.113 – 10.2.251.12610.2.251.127
5710.2.251.128/2810.2.251.129 – 10.2.251.14210.2.251.143
5810.2.251.144/2810.2.251.145 – 10.2.251.15810.2.251.159
5910.2.251.160/2810.2.251.161 – 10.2.251.17410.2.251.175
6010.2.251.176/2810.2.251.177 – 10.2.251.19010.2.251.191
6110.2.251.192/2810.2.251.193 – 10.2.251.20610.2.251.207
6210.2.251.208/2810.2.251.209 – 10.2.251.22210.2.251.223
6310.2.251.224/2810.2.251.225 – 10.2.251.23810.2.251.239
6410.2.251.240/2810.2.251.241 – 10.2.251.25410.2.251.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /22
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,0221
/23255.255.254.05125102 split →
/24255.255.255.02562544 split →
/25255.255.255.1281281268 split →
/26255.255.255.192646216 split →
/27255.255.255.224323032 split →
/28255.255.255.240161464 split →
/29255.255.255.24886128 split →
/30255.255.255.25242256 split →
/31255.255.255.25422512 split →
/32255.255.255.255111,024 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →