ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.2.24.0/21
network10.2.24.0/21
broadcast10.2.31.255
first host10.2.24.1
last host10.2.31.254
subnet mask255.255.248.0
wildcard0.0.7.255
addresses2,048
usable hosts2,046
classA
ipcalc 10.2.24.0/21
address00001010.00000010.00011000.00000000
subnet mask11111111.11111111.11111000.00000000
network00001010.00000010.00011000.00000000
broadcast00001010.00000010.00011111.11111111
green = network part, grey = host part
hex0x0a021800
decimal167909376
reverse dns0.24.2.10.in-addr.arpa
ipv4-mapped::ffff:a02:1800

/21 split into /26 · 32 subnets

close ×
#networkhost rangebroadcast
110.2.24.0/2610.2.24.1 – 10.2.24.6210.2.24.63
210.2.24.64/2610.2.24.65 – 10.2.24.12610.2.24.127
310.2.24.128/2610.2.24.129 – 10.2.24.19010.2.24.191
410.2.24.192/2610.2.24.193 – 10.2.24.25410.2.24.255
510.2.25.0/2610.2.25.1 – 10.2.25.6210.2.25.63
610.2.25.64/2610.2.25.65 – 10.2.25.12610.2.25.127
710.2.25.128/2610.2.25.129 – 10.2.25.19010.2.25.191
810.2.25.192/2610.2.25.193 – 10.2.25.25410.2.25.255
910.2.26.0/2610.2.26.1 – 10.2.26.6210.2.26.63
1010.2.26.64/2610.2.26.65 – 10.2.26.12610.2.26.127
1110.2.26.128/2610.2.26.129 – 10.2.26.19010.2.26.191
1210.2.26.192/2610.2.26.193 – 10.2.26.25410.2.26.255
1310.2.27.0/2610.2.27.1 – 10.2.27.6210.2.27.63
1410.2.27.64/2610.2.27.65 – 10.2.27.12610.2.27.127
1510.2.27.128/2610.2.27.129 – 10.2.27.19010.2.27.191
1610.2.27.192/2610.2.27.193 – 10.2.27.25410.2.27.255
1710.2.28.0/2610.2.28.1 – 10.2.28.6210.2.28.63
1810.2.28.64/2610.2.28.65 – 10.2.28.12610.2.28.127
1910.2.28.128/2610.2.28.129 – 10.2.28.19010.2.28.191
2010.2.28.192/2610.2.28.193 – 10.2.28.25410.2.28.255
2110.2.29.0/2610.2.29.1 – 10.2.29.6210.2.29.63
2210.2.29.64/2610.2.29.65 – 10.2.29.12610.2.29.127
2310.2.29.128/2610.2.29.129 – 10.2.29.19010.2.29.191
2410.2.29.192/2610.2.29.193 – 10.2.29.25410.2.29.255
2510.2.30.0/2610.2.30.1 – 10.2.30.6210.2.30.63
2610.2.30.64/2610.2.30.65 – 10.2.30.12610.2.30.127
2710.2.30.128/2610.2.30.129 – 10.2.30.19010.2.30.191
2810.2.30.192/2610.2.30.193 – 10.2.30.25410.2.30.255
2910.2.31.0/2610.2.31.1 – 10.2.31.6210.2.31.63
3010.2.31.64/2610.2.31.65 – 10.2.31.12610.2.31.127
3110.2.31.128/2610.2.31.129 – 10.2.31.19010.2.31.191
3210.2.31.192/2610.2.31.193 – 10.2.31.25410.2.31.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /21
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,0461
/22255.255.252.01,0241,0222 split →
/23255.255.254.05125104 split →
/24255.255.255.02562548 split →
/25255.255.255.12812812616 split →
/26255.255.255.192646232 split →
/27255.255.255.224323064 split →
/28255.255.255.2401614128 split →
/29255.255.255.24886256 split →
/30255.255.255.25242512 split →
/31255.255.255.254221,024 split →
/32255.255.255.255112,048 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →