ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.2.211.64/27
network10.2.211.64/27
broadcast10.2.211.95
first host10.2.211.65
last host10.2.211.94
subnet mask255.255.255.224
wildcard0.0.0.31
addresses32
usable hosts30
classA
ipcalc 10.2.211.64/27
address00001010.00000010.11010011.01000000
subnet mask11111111.11111111.11111111.11100000
network00001010.00000010.11010011.01000000
broadcast00001010.00000010.11010011.01011111
green = network part, grey = host part
hex0x0a02d340
decimal167957312
reverse dns64.211.2.10.in-addr.arpa
ipv4-mapped::ffff:a02:d340

/27 split into /32 · 32 subnets

close ×
#networkhost rangebroadcast
110.2.211.64/3210.2.211.64 – 10.2.211.6410.2.211.64
210.2.211.65/3210.2.211.65 – 10.2.211.6510.2.211.65
310.2.211.66/3210.2.211.66 – 10.2.211.6610.2.211.66
410.2.211.67/3210.2.211.67 – 10.2.211.6710.2.211.67
510.2.211.68/3210.2.211.68 – 10.2.211.6810.2.211.68
610.2.211.69/3210.2.211.69 – 10.2.211.6910.2.211.69
710.2.211.70/3210.2.211.70 – 10.2.211.7010.2.211.70
810.2.211.71/3210.2.211.71 – 10.2.211.7110.2.211.71
910.2.211.72/3210.2.211.72 – 10.2.211.7210.2.211.72
1010.2.211.73/3210.2.211.73 – 10.2.211.7310.2.211.73
1110.2.211.74/3210.2.211.74 – 10.2.211.7410.2.211.74
1210.2.211.75/3210.2.211.75 – 10.2.211.7510.2.211.75
1310.2.211.76/3210.2.211.76 – 10.2.211.7610.2.211.76
1410.2.211.77/3210.2.211.77 – 10.2.211.7710.2.211.77
1510.2.211.78/3210.2.211.78 – 10.2.211.7810.2.211.78
1610.2.211.79/3210.2.211.79 – 10.2.211.7910.2.211.79
1710.2.211.80/3210.2.211.80 – 10.2.211.8010.2.211.80
1810.2.211.81/3210.2.211.81 – 10.2.211.8110.2.211.81
1910.2.211.82/3210.2.211.82 – 10.2.211.8210.2.211.82
2010.2.211.83/3210.2.211.83 – 10.2.211.8310.2.211.83
2110.2.211.84/3210.2.211.84 – 10.2.211.8410.2.211.84
2210.2.211.85/3210.2.211.85 – 10.2.211.8510.2.211.85
2310.2.211.86/3210.2.211.86 – 10.2.211.8610.2.211.86
2410.2.211.87/3210.2.211.87 – 10.2.211.8710.2.211.87
2510.2.211.88/3210.2.211.88 – 10.2.211.8810.2.211.88
2610.2.211.89/3210.2.211.89 – 10.2.211.8910.2.211.89
2710.2.211.90/3210.2.211.90 – 10.2.211.9010.2.211.90
2810.2.211.91/3210.2.211.91 – 10.2.211.9110.2.211.91
2910.2.211.92/3210.2.211.92 – 10.2.211.9210.2.211.92
3010.2.211.93/3210.2.211.93 – 10.2.211.9310.2.211.93
3110.2.211.94/3210.2.211.94 – 10.2.211.9410.2.211.94
3210.2.211.95/3210.2.211.95 – 10.2.211.9510.2.211.95
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /27
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.1926462-
/27255.255.255.22432301
/28255.255.255.24016142 split →
/29255.255.255.248864 split →
/30255.255.255.252428 split →
/31255.255.255.2542216 split →
/32255.255.255.2551132 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →