ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.2.204.0/23
network10.2.204.0/23
broadcast10.2.205.255
first host10.2.204.1
last host10.2.205.254
subnet mask255.255.254.0
wildcard0.0.1.255
addresses512
usable hosts510
classA
ipcalc 10.2.204.0/23
address00001010.00000010.11001100.00000000
subnet mask11111111.11111111.11111110.00000000
network00001010.00000010.11001100.00000000
broadcast00001010.00000010.11001101.11111111
green = network part, grey = host part
hex0x0a02cc00
decimal167955456
reverse dns0.204.2.10.in-addr.arpa
ipv4-mapped::ffff:a02:cc00

/23 split into /28 · 32 subnets

close ×
#networkhost rangebroadcast
110.2.204.0/2810.2.204.1 – 10.2.204.1410.2.204.15
210.2.204.16/2810.2.204.17 – 10.2.204.3010.2.204.31
310.2.204.32/2810.2.204.33 – 10.2.204.4610.2.204.47
410.2.204.48/2810.2.204.49 – 10.2.204.6210.2.204.63
510.2.204.64/2810.2.204.65 – 10.2.204.7810.2.204.79
610.2.204.80/2810.2.204.81 – 10.2.204.9410.2.204.95
710.2.204.96/2810.2.204.97 – 10.2.204.11010.2.204.111
810.2.204.112/2810.2.204.113 – 10.2.204.12610.2.204.127
910.2.204.128/2810.2.204.129 – 10.2.204.14210.2.204.143
1010.2.204.144/2810.2.204.145 – 10.2.204.15810.2.204.159
1110.2.204.160/2810.2.204.161 – 10.2.204.17410.2.204.175
1210.2.204.176/2810.2.204.177 – 10.2.204.19010.2.204.191
1310.2.204.192/2810.2.204.193 – 10.2.204.20610.2.204.207
1410.2.204.208/2810.2.204.209 – 10.2.204.22210.2.204.223
1510.2.204.224/2810.2.204.225 – 10.2.204.23810.2.204.239
1610.2.204.240/2810.2.204.241 – 10.2.204.25410.2.204.255
1710.2.205.0/2810.2.205.1 – 10.2.205.1410.2.205.15
1810.2.205.16/2810.2.205.17 – 10.2.205.3010.2.205.31
1910.2.205.32/2810.2.205.33 – 10.2.205.4610.2.205.47
2010.2.205.48/2810.2.205.49 – 10.2.205.6210.2.205.63
2110.2.205.64/2810.2.205.65 – 10.2.205.7810.2.205.79
2210.2.205.80/2810.2.205.81 – 10.2.205.9410.2.205.95
2310.2.205.96/2810.2.205.97 – 10.2.205.11010.2.205.111
2410.2.205.112/2810.2.205.113 – 10.2.205.12610.2.205.127
2510.2.205.128/2810.2.205.129 – 10.2.205.14210.2.205.143
2610.2.205.144/2810.2.205.145 – 10.2.205.15810.2.205.159
2710.2.205.160/2810.2.205.161 – 10.2.205.17410.2.205.175
2810.2.205.176/2810.2.205.177 – 10.2.205.19010.2.205.191
2910.2.205.192/2810.2.205.193 – 10.2.205.20610.2.205.207
3010.2.205.208/2810.2.205.209 – 10.2.205.22210.2.205.223
3110.2.205.224/2810.2.205.225 – 10.2.205.23810.2.205.239
3210.2.205.240/2810.2.205.241 – 10.2.205.25410.2.205.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /23
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.05125101
/24255.255.255.02562542 split →
/25255.255.255.1281281264 split →
/26255.255.255.19264628 split →
/27255.255.255.224323016 split →
/28255.255.255.240161432 split →
/29255.255.255.2488664 split →
/30255.255.255.25242128 split →
/31255.255.255.25422256 split →
/32255.255.255.25511512 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →