ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.2.197.0/24
network10.2.197.0/24
broadcast10.2.197.255
first host10.2.197.1
last host10.2.197.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.2.197.0/24
address00001010.00000010.11000101.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.00000010.11000101.00000000
broadcast00001010.00000010.11000101.11111111
green = network part, grey = host part
hex0x0a02c500
decimal167953664
reverse dns0.197.2.10.in-addr.arpa
ipv4-mapped::ffff:a02:c500

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.2.197.0/3010.2.197.1 – 10.2.197.210.2.197.3
210.2.197.4/3010.2.197.5 – 10.2.197.610.2.197.7
310.2.197.8/3010.2.197.9 – 10.2.197.1010.2.197.11
410.2.197.12/3010.2.197.13 – 10.2.197.1410.2.197.15
510.2.197.16/3010.2.197.17 – 10.2.197.1810.2.197.19
610.2.197.20/3010.2.197.21 – 10.2.197.2210.2.197.23
710.2.197.24/3010.2.197.25 – 10.2.197.2610.2.197.27
810.2.197.28/3010.2.197.29 – 10.2.197.3010.2.197.31
910.2.197.32/3010.2.197.33 – 10.2.197.3410.2.197.35
1010.2.197.36/3010.2.197.37 – 10.2.197.3810.2.197.39
1110.2.197.40/3010.2.197.41 – 10.2.197.4210.2.197.43
1210.2.197.44/3010.2.197.45 – 10.2.197.4610.2.197.47
1310.2.197.48/3010.2.197.49 – 10.2.197.5010.2.197.51
1410.2.197.52/3010.2.197.53 – 10.2.197.5410.2.197.55
1510.2.197.56/3010.2.197.57 – 10.2.197.5810.2.197.59
1610.2.197.60/3010.2.197.61 – 10.2.197.6210.2.197.63
1710.2.197.64/3010.2.197.65 – 10.2.197.6610.2.197.67
1810.2.197.68/3010.2.197.69 – 10.2.197.7010.2.197.71
1910.2.197.72/3010.2.197.73 – 10.2.197.7410.2.197.75
2010.2.197.76/3010.2.197.77 – 10.2.197.7810.2.197.79
2110.2.197.80/3010.2.197.81 – 10.2.197.8210.2.197.83
2210.2.197.84/3010.2.197.85 – 10.2.197.8610.2.197.87
2310.2.197.88/3010.2.197.89 – 10.2.197.9010.2.197.91
2410.2.197.92/3010.2.197.93 – 10.2.197.9410.2.197.95
2510.2.197.96/3010.2.197.97 – 10.2.197.9810.2.197.99
2610.2.197.100/3010.2.197.101 – 10.2.197.10210.2.197.103
2710.2.197.104/3010.2.197.105 – 10.2.197.10610.2.197.107
2810.2.197.108/3010.2.197.109 – 10.2.197.11010.2.197.111
2910.2.197.112/3010.2.197.113 – 10.2.197.11410.2.197.115
3010.2.197.116/3010.2.197.117 – 10.2.197.11810.2.197.119
3110.2.197.120/3010.2.197.121 – 10.2.197.12210.2.197.123
3210.2.197.124/3010.2.197.125 – 10.2.197.12610.2.197.127
3310.2.197.128/3010.2.197.129 – 10.2.197.13010.2.197.131
3410.2.197.132/3010.2.197.133 – 10.2.197.13410.2.197.135
3510.2.197.136/3010.2.197.137 – 10.2.197.13810.2.197.139
3610.2.197.140/3010.2.197.141 – 10.2.197.14210.2.197.143
3710.2.197.144/3010.2.197.145 – 10.2.197.14610.2.197.147
3810.2.197.148/3010.2.197.149 – 10.2.197.15010.2.197.151
3910.2.197.152/3010.2.197.153 – 10.2.197.15410.2.197.155
4010.2.197.156/3010.2.197.157 – 10.2.197.15810.2.197.159
4110.2.197.160/3010.2.197.161 – 10.2.197.16210.2.197.163
4210.2.197.164/3010.2.197.165 – 10.2.197.16610.2.197.167
4310.2.197.168/3010.2.197.169 – 10.2.197.17010.2.197.171
4410.2.197.172/3010.2.197.173 – 10.2.197.17410.2.197.175
4510.2.197.176/3010.2.197.177 – 10.2.197.17810.2.197.179
4610.2.197.180/3010.2.197.181 – 10.2.197.18210.2.197.183
4710.2.197.184/3010.2.197.185 – 10.2.197.18610.2.197.187
4810.2.197.188/3010.2.197.189 – 10.2.197.19010.2.197.191
4910.2.197.192/3010.2.197.193 – 10.2.197.19410.2.197.195
5010.2.197.196/3010.2.197.197 – 10.2.197.19810.2.197.199
5110.2.197.200/3010.2.197.201 – 10.2.197.20210.2.197.203
5210.2.197.204/3010.2.197.205 – 10.2.197.20610.2.197.207
5310.2.197.208/3010.2.197.209 – 10.2.197.21010.2.197.211
5410.2.197.212/3010.2.197.213 – 10.2.197.21410.2.197.215
5510.2.197.216/3010.2.197.217 – 10.2.197.21810.2.197.219
5610.2.197.220/3010.2.197.221 – 10.2.197.22210.2.197.223
5710.2.197.224/3010.2.197.225 – 10.2.197.22610.2.197.227
5810.2.197.228/3010.2.197.229 – 10.2.197.23010.2.197.231
5910.2.197.232/3010.2.197.233 – 10.2.197.23410.2.197.235
6010.2.197.236/3010.2.197.237 – 10.2.197.23810.2.197.239
6110.2.197.240/3010.2.197.241 – 10.2.197.24210.2.197.243
6210.2.197.244/3010.2.197.245 – 10.2.197.24610.2.197.247
6310.2.197.248/3010.2.197.249 – 10.2.197.25010.2.197.251
6410.2.197.252/3010.2.197.253 – 10.2.197.25410.2.197.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →