ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.2.186.0/24
network10.2.186.0/24
broadcast10.2.186.255
first host10.2.186.1
last host10.2.186.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.2.186.0/24
address00001010.00000010.10111010.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.00000010.10111010.00000000
broadcast00001010.00000010.10111010.11111111
green = network part, grey = host part
hex0x0a02ba00
decimal167950848
reverse dns0.186.2.10.in-addr.arpa
ipv4-mapped::ffff:a02:ba00

/24 split into /29 · 32 subnets

close ×
#networkhost rangebroadcast
110.2.186.0/2910.2.186.1 – 10.2.186.610.2.186.7
210.2.186.8/2910.2.186.9 – 10.2.186.1410.2.186.15
310.2.186.16/2910.2.186.17 – 10.2.186.2210.2.186.23
410.2.186.24/2910.2.186.25 – 10.2.186.3010.2.186.31
510.2.186.32/2910.2.186.33 – 10.2.186.3810.2.186.39
610.2.186.40/2910.2.186.41 – 10.2.186.4610.2.186.47
710.2.186.48/2910.2.186.49 – 10.2.186.5410.2.186.55
810.2.186.56/2910.2.186.57 – 10.2.186.6210.2.186.63
910.2.186.64/2910.2.186.65 – 10.2.186.7010.2.186.71
1010.2.186.72/2910.2.186.73 – 10.2.186.7810.2.186.79
1110.2.186.80/2910.2.186.81 – 10.2.186.8610.2.186.87
1210.2.186.88/2910.2.186.89 – 10.2.186.9410.2.186.95
1310.2.186.96/2910.2.186.97 – 10.2.186.10210.2.186.103
1410.2.186.104/2910.2.186.105 – 10.2.186.11010.2.186.111
1510.2.186.112/2910.2.186.113 – 10.2.186.11810.2.186.119
1610.2.186.120/2910.2.186.121 – 10.2.186.12610.2.186.127
1710.2.186.128/2910.2.186.129 – 10.2.186.13410.2.186.135
1810.2.186.136/2910.2.186.137 – 10.2.186.14210.2.186.143
1910.2.186.144/2910.2.186.145 – 10.2.186.15010.2.186.151
2010.2.186.152/2910.2.186.153 – 10.2.186.15810.2.186.159
2110.2.186.160/2910.2.186.161 – 10.2.186.16610.2.186.167
2210.2.186.168/2910.2.186.169 – 10.2.186.17410.2.186.175
2310.2.186.176/2910.2.186.177 – 10.2.186.18210.2.186.183
2410.2.186.184/2910.2.186.185 – 10.2.186.19010.2.186.191
2510.2.186.192/2910.2.186.193 – 10.2.186.19810.2.186.199
2610.2.186.200/2910.2.186.201 – 10.2.186.20610.2.186.207
2710.2.186.208/2910.2.186.209 – 10.2.186.21410.2.186.215
2810.2.186.216/2910.2.186.217 – 10.2.186.22210.2.186.223
2910.2.186.224/2910.2.186.225 – 10.2.186.23010.2.186.231
3010.2.186.232/2910.2.186.233 – 10.2.186.23810.2.186.239
3110.2.186.240/2910.2.186.241 – 10.2.186.24610.2.186.247
3210.2.186.248/2910.2.186.249 – 10.2.186.25410.2.186.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →