ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.2.185.0/26
network10.2.185.0/26
broadcast10.2.185.63
first host10.2.185.1
last host10.2.185.62
subnet mask255.255.255.192
wildcard0.0.0.63
addresses64
usable hosts62
classA
ipcalc 10.2.185.0/26
address00001010.00000010.10111001.00000000
subnet mask11111111.11111111.11111111.11000000
network00001010.00000010.10111001.00000000
broadcast00001010.00000010.10111001.00111111
green = network part, grey = host part
hex0x0a02b900
decimal167950592
reverse dns0.185.2.10.in-addr.arpa
ipv4-mapped::ffff:a02:b900

/26 split into /31 · 32 subnets

close ×
#networkhost rangebroadcast
110.2.185.0/3110.2.185.0 – 10.2.185.110.2.185.1
210.2.185.2/3110.2.185.2 – 10.2.185.310.2.185.3
310.2.185.4/3110.2.185.4 – 10.2.185.510.2.185.5
410.2.185.6/3110.2.185.6 – 10.2.185.710.2.185.7
510.2.185.8/3110.2.185.8 – 10.2.185.910.2.185.9
610.2.185.10/3110.2.185.10 – 10.2.185.1110.2.185.11
710.2.185.12/3110.2.185.12 – 10.2.185.1310.2.185.13
810.2.185.14/3110.2.185.14 – 10.2.185.1510.2.185.15
910.2.185.16/3110.2.185.16 – 10.2.185.1710.2.185.17
1010.2.185.18/3110.2.185.18 – 10.2.185.1910.2.185.19
1110.2.185.20/3110.2.185.20 – 10.2.185.2110.2.185.21
1210.2.185.22/3110.2.185.22 – 10.2.185.2310.2.185.23
1310.2.185.24/3110.2.185.24 – 10.2.185.2510.2.185.25
1410.2.185.26/3110.2.185.26 – 10.2.185.2710.2.185.27
1510.2.185.28/3110.2.185.28 – 10.2.185.2910.2.185.29
1610.2.185.30/3110.2.185.30 – 10.2.185.3110.2.185.31
1710.2.185.32/3110.2.185.32 – 10.2.185.3310.2.185.33
1810.2.185.34/3110.2.185.34 – 10.2.185.3510.2.185.35
1910.2.185.36/3110.2.185.36 – 10.2.185.3710.2.185.37
2010.2.185.38/3110.2.185.38 – 10.2.185.3910.2.185.39
2110.2.185.40/3110.2.185.40 – 10.2.185.4110.2.185.41
2210.2.185.42/3110.2.185.42 – 10.2.185.4310.2.185.43
2310.2.185.44/3110.2.185.44 – 10.2.185.4510.2.185.45
2410.2.185.46/3110.2.185.46 – 10.2.185.4710.2.185.47
2510.2.185.48/3110.2.185.48 – 10.2.185.4910.2.185.49
2610.2.185.50/3110.2.185.50 – 10.2.185.5110.2.185.51
2710.2.185.52/3110.2.185.52 – 10.2.185.5310.2.185.53
2810.2.185.54/3110.2.185.54 – 10.2.185.5510.2.185.55
2910.2.185.56/3110.2.185.56 – 10.2.185.5710.2.185.57
3010.2.185.58/3110.2.185.58 – 10.2.185.5910.2.185.59
3110.2.185.60/3110.2.185.60 – 10.2.185.6110.2.185.61
3210.2.185.62/3110.2.185.62 – 10.2.185.6310.2.185.63
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /26
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.19264621
/27255.255.255.22432302 split →
/28255.255.255.24016144 split →
/29255.255.255.248868 split →
/30255.255.255.2524216 split →
/31255.255.255.2542232 split →
/32255.255.255.2551164 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →