IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

Try:192.168.1.10/24 10.0.0.0/8 172.16.5.4/20 203.0.113.9/29

IPv6 calculator →

private IP (RFC 1918)10.2.161.64/26

network10.2.161.64/26

broadcast10.2.161.127

first host10.2.161.65

last host10.2.161.126

subnet mask255.255.255.192

wildcard0.0.0.63

addresses64

usable hosts62

classA

ipcalc 10.2.161.64/26

address00001010.00000010.10100001.01000000

subnet mask11111111.11111111.11111111.11000000

network00001010.00000010.10100001.01000000

broadcast00001010.00000010.10100001.01111111

green = network part, grey = host part

hex0x0a02a140

decimal167944512

reverse dns64.161.2.10.in-addr.arpa

ipv4-mapped::ffff:a02:a140

/26 split into /32 · 64 subnets

close ×

#	network	host range	broadcast
1	10.2.161.64/32	10.2.161.64 – 10.2.161.64	10.2.161.64
2	10.2.161.65/32	10.2.161.65 – 10.2.161.65	10.2.161.65
3	10.2.161.66/32	10.2.161.66 – 10.2.161.66	10.2.161.66
4	10.2.161.67/32	10.2.161.67 – 10.2.161.67	10.2.161.67
5	10.2.161.68/32	10.2.161.68 – 10.2.161.68	10.2.161.68
6	10.2.161.69/32	10.2.161.69 – 10.2.161.69	10.2.161.69
7	10.2.161.70/32	10.2.161.70 – 10.2.161.70	10.2.161.70
8	10.2.161.71/32	10.2.161.71 – 10.2.161.71	10.2.161.71
9	10.2.161.72/32	10.2.161.72 – 10.2.161.72	10.2.161.72
10	10.2.161.73/32	10.2.161.73 – 10.2.161.73	10.2.161.73
11	10.2.161.74/32	10.2.161.74 – 10.2.161.74	10.2.161.74
12	10.2.161.75/32	10.2.161.75 – 10.2.161.75	10.2.161.75
13	10.2.161.76/32	10.2.161.76 – 10.2.161.76	10.2.161.76
14	10.2.161.77/32	10.2.161.77 – 10.2.161.77	10.2.161.77
15	10.2.161.78/32	10.2.161.78 – 10.2.161.78	10.2.161.78
16	10.2.161.79/32	10.2.161.79 – 10.2.161.79	10.2.161.79
17	10.2.161.80/32	10.2.161.80 – 10.2.161.80	10.2.161.80
18	10.2.161.81/32	10.2.161.81 – 10.2.161.81	10.2.161.81
19	10.2.161.82/32	10.2.161.82 – 10.2.161.82	10.2.161.82
20	10.2.161.83/32	10.2.161.83 – 10.2.161.83	10.2.161.83
21	10.2.161.84/32	10.2.161.84 – 10.2.161.84	10.2.161.84
22	10.2.161.85/32	10.2.161.85 – 10.2.161.85	10.2.161.85
23	10.2.161.86/32	10.2.161.86 – 10.2.161.86	10.2.161.86
24	10.2.161.87/32	10.2.161.87 – 10.2.161.87	10.2.161.87
25	10.2.161.88/32	10.2.161.88 – 10.2.161.88	10.2.161.88
26	10.2.161.89/32	10.2.161.89 – 10.2.161.89	10.2.161.89
27	10.2.161.90/32	10.2.161.90 – 10.2.161.90	10.2.161.90
28	10.2.161.91/32	10.2.161.91 – 10.2.161.91	10.2.161.91
29	10.2.161.92/32	10.2.161.92 – 10.2.161.92	10.2.161.92
30	10.2.161.93/32	10.2.161.93 – 10.2.161.93	10.2.161.93
31	10.2.161.94/32	10.2.161.94 – 10.2.161.94	10.2.161.94
32	10.2.161.95/32	10.2.161.95 – 10.2.161.95	10.2.161.95
33	10.2.161.96/32	10.2.161.96 – 10.2.161.96	10.2.161.96
34	10.2.161.97/32	10.2.161.97 – 10.2.161.97	10.2.161.97
35	10.2.161.98/32	10.2.161.98 – 10.2.161.98	10.2.161.98
36	10.2.161.99/32	10.2.161.99 – 10.2.161.99	10.2.161.99
37	10.2.161.100/32	10.2.161.100 – 10.2.161.100	10.2.161.100
38	10.2.161.101/32	10.2.161.101 – 10.2.161.101	10.2.161.101
39	10.2.161.102/32	10.2.161.102 – 10.2.161.102	10.2.161.102
40	10.2.161.103/32	10.2.161.103 – 10.2.161.103	10.2.161.103
41	10.2.161.104/32	10.2.161.104 – 10.2.161.104	10.2.161.104
42	10.2.161.105/32	10.2.161.105 – 10.2.161.105	10.2.161.105
43	10.2.161.106/32	10.2.161.106 – 10.2.161.106	10.2.161.106
44	10.2.161.107/32	10.2.161.107 – 10.2.161.107	10.2.161.107
45	10.2.161.108/32	10.2.161.108 – 10.2.161.108	10.2.161.108
46	10.2.161.109/32	10.2.161.109 – 10.2.161.109	10.2.161.109
47	10.2.161.110/32	10.2.161.110 – 10.2.161.110	10.2.161.110
48	10.2.161.111/32	10.2.161.111 – 10.2.161.111	10.2.161.111
49	10.2.161.112/32	10.2.161.112 – 10.2.161.112	10.2.161.112
50	10.2.161.113/32	10.2.161.113 – 10.2.161.113	10.2.161.113
51	10.2.161.114/32	10.2.161.114 – 10.2.161.114	10.2.161.114
52	10.2.161.115/32	10.2.161.115 – 10.2.161.115	10.2.161.115
53	10.2.161.116/32	10.2.161.116 – 10.2.161.116	10.2.161.116
54	10.2.161.117/32	10.2.161.117 – 10.2.161.117	10.2.161.117
55	10.2.161.118/32	10.2.161.118 – 10.2.161.118	10.2.161.118
56	10.2.161.119/32	10.2.161.119 – 10.2.161.119	10.2.161.119
57	10.2.161.120/32	10.2.161.120 – 10.2.161.120	10.2.161.120
58	10.2.161.121/32	10.2.161.121 – 10.2.161.121	10.2.161.121
59	10.2.161.122/32	10.2.161.122 – 10.2.161.122	10.2.161.122
60	10.2.161.123/32	10.2.161.123 – 10.2.161.123	10.2.161.123
61	10.2.161.124/32	10.2.161.124 – 10.2.161.124	10.2.161.124
62	10.2.161.125/32	10.2.161.125 – 10.2.161.125	10.2.161.125
63	10.2.161.126/32	10.2.161.126 – 10.2.161.126	10.2.161.126
64	10.2.161.127/32	10.2.161.127 – 10.2.161.127	10.2.161.127

01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefix	subnet mask	addresses	hosts	in your /26
/0	0.0.0.0	4,294,967,296	4,294,967,294	-
/1	128.0.0.0	2,147,483,648	2,147,483,646	-
/2	192.0.0.0	1,073,741,824	1,073,741,822	-
/3	224.0.0.0	536,870,912	536,870,910	-
/4	240.0.0.0	268,435,456	268,435,454	-
/5	248.0.0.0	134,217,728	134,217,726	-
/6	252.0.0.0	67,108,864	67,108,862	-
/7	254.0.0.0	33,554,432	33,554,430	-
/8	255.0.0.0	16,777,216	16,777,214	-
/9	255.128.0.0	8,388,608	8,388,606	-
/10	255.192.0.0	4,194,304	4,194,302	-
/11	255.224.0.0	2,097,152	2,097,150	-
/12	255.240.0.0	1,048,576	1,048,574	-
/13	255.248.0.0	524,288	524,286	-
/14	255.252.0.0	262,144	262,142	-
/15	255.254.0.0	131,072	131,070	-
/16	255.255.0.0	65,536	65,534	-
/17	255.255.128.0	32,768	32,766	-
/18	255.255.192.0	16,384	16,382	-
/19	255.255.224.0	8,192	8,190	-
/20	255.255.240.0	4,096	4,094	-
/21	255.255.248.0	2,048	2,046	-
/22	255.255.252.0	1,024	1,022	-
/23	255.255.254.0	512	510	-
/24	255.255.255.0	256	254	-
/25	255.255.255.128	128	126	-
/26	255.255.255.192	64	62	1
/27	255.255.255.224	32	30	2 split →
/28	255.255.255.240	16	14	4 split →
/29	255.255.255.248	8	6	8 split →
/30	255.255.255.252	4	2	16 split →
/31	255.255.255.254	2	2	32 split →
/32	255.255.255.255	1	1	64 split →

02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →