IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

Try:192.168.1.10/24 10.0.0.0/8 172.16.5.4/20 203.0.113.9/29

IPv6 calculator →

private IP (RFC 1918)10.2.128.0/26

network10.2.128.0/26

broadcast10.2.128.63

first host10.2.128.1

last host10.2.128.62

subnet mask255.255.255.192

wildcard0.0.0.63

addresses64

usable hosts62

classA

ipcalc 10.2.128.0/26

address00001010.00000010.10000000.00000000

subnet mask11111111.11111111.11111111.11000000

network00001010.00000010.10000000.00000000

broadcast00001010.00000010.10000000.00111111

green = network part, grey = host part

hex0x0a028000

decimal167936000

reverse dns0.128.2.10.in-addr.arpa

ipv4-mapped::ffff:a02:8000

/26 split into /31 · 32 subnets

close ×

#	network	host range	broadcast
1	10.2.128.0/31	10.2.128.0 – 10.2.128.1	10.2.128.1
2	10.2.128.2/31	10.2.128.2 – 10.2.128.3	10.2.128.3
3	10.2.128.4/31	10.2.128.4 – 10.2.128.5	10.2.128.5
4	10.2.128.6/31	10.2.128.6 – 10.2.128.7	10.2.128.7
5	10.2.128.8/31	10.2.128.8 – 10.2.128.9	10.2.128.9
6	10.2.128.10/31	10.2.128.10 – 10.2.128.11	10.2.128.11
7	10.2.128.12/31	10.2.128.12 – 10.2.128.13	10.2.128.13
8	10.2.128.14/31	10.2.128.14 – 10.2.128.15	10.2.128.15
9	10.2.128.16/31	10.2.128.16 – 10.2.128.17	10.2.128.17
10	10.2.128.18/31	10.2.128.18 – 10.2.128.19	10.2.128.19
11	10.2.128.20/31	10.2.128.20 – 10.2.128.21	10.2.128.21
12	10.2.128.22/31	10.2.128.22 – 10.2.128.23	10.2.128.23
13	10.2.128.24/31	10.2.128.24 – 10.2.128.25	10.2.128.25
14	10.2.128.26/31	10.2.128.26 – 10.2.128.27	10.2.128.27
15	10.2.128.28/31	10.2.128.28 – 10.2.128.29	10.2.128.29
16	10.2.128.30/31	10.2.128.30 – 10.2.128.31	10.2.128.31
17	10.2.128.32/31	10.2.128.32 – 10.2.128.33	10.2.128.33
18	10.2.128.34/31	10.2.128.34 – 10.2.128.35	10.2.128.35
19	10.2.128.36/31	10.2.128.36 – 10.2.128.37	10.2.128.37
20	10.2.128.38/31	10.2.128.38 – 10.2.128.39	10.2.128.39
21	10.2.128.40/31	10.2.128.40 – 10.2.128.41	10.2.128.41
22	10.2.128.42/31	10.2.128.42 – 10.2.128.43	10.2.128.43
23	10.2.128.44/31	10.2.128.44 – 10.2.128.45	10.2.128.45
24	10.2.128.46/31	10.2.128.46 – 10.2.128.47	10.2.128.47
25	10.2.128.48/31	10.2.128.48 – 10.2.128.49	10.2.128.49
26	10.2.128.50/31	10.2.128.50 – 10.2.128.51	10.2.128.51
27	10.2.128.52/31	10.2.128.52 – 10.2.128.53	10.2.128.53
28	10.2.128.54/31	10.2.128.54 – 10.2.128.55	10.2.128.55
29	10.2.128.56/31	10.2.128.56 – 10.2.128.57	10.2.128.57
30	10.2.128.58/31	10.2.128.58 – 10.2.128.59	10.2.128.59
31	10.2.128.60/31	10.2.128.60 – 10.2.128.61	10.2.128.61
32	10.2.128.62/31	10.2.128.62 – 10.2.128.63	10.2.128.63

01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefix	subnet mask	addresses	hosts	in your /26
/0	0.0.0.0	4,294,967,296	4,294,967,294	-
/1	128.0.0.0	2,147,483,648	2,147,483,646	-
/2	192.0.0.0	1,073,741,824	1,073,741,822	-
/3	224.0.0.0	536,870,912	536,870,910	-
/4	240.0.0.0	268,435,456	268,435,454	-
/5	248.0.0.0	134,217,728	134,217,726	-
/6	252.0.0.0	67,108,864	67,108,862	-
/7	254.0.0.0	33,554,432	33,554,430	-
/8	255.0.0.0	16,777,216	16,777,214	-
/9	255.128.0.0	8,388,608	8,388,606	-
/10	255.192.0.0	4,194,304	4,194,302	-
/11	255.224.0.0	2,097,152	2,097,150	-
/12	255.240.0.0	1,048,576	1,048,574	-
/13	255.248.0.0	524,288	524,286	-
/14	255.252.0.0	262,144	262,142	-
/15	255.254.0.0	131,072	131,070	-
/16	255.255.0.0	65,536	65,534	-
/17	255.255.128.0	32,768	32,766	-
/18	255.255.192.0	16,384	16,382	-
/19	255.255.224.0	8,192	8,190	-
/20	255.255.240.0	4,096	4,094	-
/21	255.255.248.0	2,048	2,046	-
/22	255.255.252.0	1,024	1,022	-
/23	255.255.254.0	512	510	-
/24	255.255.255.0	256	254	-
/25	255.255.255.128	128	126	-
/26	255.255.255.192	64	62	1
/27	255.255.255.224	32	30	2 split →
/28	255.255.255.240	16	14	4 split →
/29	255.255.255.248	8	6	8 split →
/30	255.255.255.252	4	2	16 split →
/31	255.255.255.254	2	2	32 split →
/32	255.255.255.255	1	1	64 split →

02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →