IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

Try:192.168.1.10/24 10.0.0.0/8 172.16.5.4/20 203.0.113.9/29

IPv6 calculator →

private IP (RFC 1918)10.2.128.0/20

network10.2.128.0/20

broadcast10.2.143.255

first host10.2.128.1

last host10.2.143.254

subnet mask255.255.240.0

wildcard0.0.15.255

addresses4,096

usable hosts4,094

classA

ipcalc 10.2.128.0/20

address00001010.00000010.10000000.00000000

subnet mask11111111.11111111.11110000.00000000

network00001010.00000010.10000000.00000000

broadcast00001010.00000010.10001111.11111111

green = network part, grey = host part

hex0x0a028000

decimal167936000

reverse dns0.128.2.10.in-addr.arpa

ipv4-mapped::ffff:a02:8000

/20 split into /26 · 64 subnets

close ×

#	network	host range	broadcast
1	10.2.128.0/26	10.2.128.1 – 10.2.128.62	10.2.128.63
2	10.2.128.64/26	10.2.128.65 – 10.2.128.126	10.2.128.127
3	10.2.128.128/26	10.2.128.129 – 10.2.128.190	10.2.128.191
4	10.2.128.192/26	10.2.128.193 – 10.2.128.254	10.2.128.255
5	10.2.129.0/26	10.2.129.1 – 10.2.129.62	10.2.129.63
6	10.2.129.64/26	10.2.129.65 – 10.2.129.126	10.2.129.127
7	10.2.129.128/26	10.2.129.129 – 10.2.129.190	10.2.129.191
8	10.2.129.192/26	10.2.129.193 – 10.2.129.254	10.2.129.255
9	10.2.130.0/26	10.2.130.1 – 10.2.130.62	10.2.130.63
10	10.2.130.64/26	10.2.130.65 – 10.2.130.126	10.2.130.127
11	10.2.130.128/26	10.2.130.129 – 10.2.130.190	10.2.130.191
12	10.2.130.192/26	10.2.130.193 – 10.2.130.254	10.2.130.255
13	10.2.131.0/26	10.2.131.1 – 10.2.131.62	10.2.131.63
14	10.2.131.64/26	10.2.131.65 – 10.2.131.126	10.2.131.127
15	10.2.131.128/26	10.2.131.129 – 10.2.131.190	10.2.131.191
16	10.2.131.192/26	10.2.131.193 – 10.2.131.254	10.2.131.255
17	10.2.132.0/26	10.2.132.1 – 10.2.132.62	10.2.132.63
18	10.2.132.64/26	10.2.132.65 – 10.2.132.126	10.2.132.127
19	10.2.132.128/26	10.2.132.129 – 10.2.132.190	10.2.132.191
20	10.2.132.192/26	10.2.132.193 – 10.2.132.254	10.2.132.255
21	10.2.133.0/26	10.2.133.1 – 10.2.133.62	10.2.133.63
22	10.2.133.64/26	10.2.133.65 – 10.2.133.126	10.2.133.127
23	10.2.133.128/26	10.2.133.129 – 10.2.133.190	10.2.133.191
24	10.2.133.192/26	10.2.133.193 – 10.2.133.254	10.2.133.255
25	10.2.134.0/26	10.2.134.1 – 10.2.134.62	10.2.134.63
26	10.2.134.64/26	10.2.134.65 – 10.2.134.126	10.2.134.127
27	10.2.134.128/26	10.2.134.129 – 10.2.134.190	10.2.134.191
28	10.2.134.192/26	10.2.134.193 – 10.2.134.254	10.2.134.255
29	10.2.135.0/26	10.2.135.1 – 10.2.135.62	10.2.135.63
30	10.2.135.64/26	10.2.135.65 – 10.2.135.126	10.2.135.127
31	10.2.135.128/26	10.2.135.129 – 10.2.135.190	10.2.135.191
32	10.2.135.192/26	10.2.135.193 – 10.2.135.254	10.2.135.255
33	10.2.136.0/26	10.2.136.1 – 10.2.136.62	10.2.136.63
34	10.2.136.64/26	10.2.136.65 – 10.2.136.126	10.2.136.127
35	10.2.136.128/26	10.2.136.129 – 10.2.136.190	10.2.136.191
36	10.2.136.192/26	10.2.136.193 – 10.2.136.254	10.2.136.255
37	10.2.137.0/26	10.2.137.1 – 10.2.137.62	10.2.137.63
38	10.2.137.64/26	10.2.137.65 – 10.2.137.126	10.2.137.127
39	10.2.137.128/26	10.2.137.129 – 10.2.137.190	10.2.137.191
40	10.2.137.192/26	10.2.137.193 – 10.2.137.254	10.2.137.255
41	10.2.138.0/26	10.2.138.1 – 10.2.138.62	10.2.138.63
42	10.2.138.64/26	10.2.138.65 – 10.2.138.126	10.2.138.127
43	10.2.138.128/26	10.2.138.129 – 10.2.138.190	10.2.138.191
44	10.2.138.192/26	10.2.138.193 – 10.2.138.254	10.2.138.255
45	10.2.139.0/26	10.2.139.1 – 10.2.139.62	10.2.139.63
46	10.2.139.64/26	10.2.139.65 – 10.2.139.126	10.2.139.127
47	10.2.139.128/26	10.2.139.129 – 10.2.139.190	10.2.139.191
48	10.2.139.192/26	10.2.139.193 – 10.2.139.254	10.2.139.255
49	10.2.140.0/26	10.2.140.1 – 10.2.140.62	10.2.140.63
50	10.2.140.64/26	10.2.140.65 – 10.2.140.126	10.2.140.127
51	10.2.140.128/26	10.2.140.129 – 10.2.140.190	10.2.140.191
52	10.2.140.192/26	10.2.140.193 – 10.2.140.254	10.2.140.255
53	10.2.141.0/26	10.2.141.1 – 10.2.141.62	10.2.141.63
54	10.2.141.64/26	10.2.141.65 – 10.2.141.126	10.2.141.127
55	10.2.141.128/26	10.2.141.129 – 10.2.141.190	10.2.141.191
56	10.2.141.192/26	10.2.141.193 – 10.2.141.254	10.2.141.255
57	10.2.142.0/26	10.2.142.1 – 10.2.142.62	10.2.142.63
58	10.2.142.64/26	10.2.142.65 – 10.2.142.126	10.2.142.127
59	10.2.142.128/26	10.2.142.129 – 10.2.142.190	10.2.142.191
60	10.2.142.192/26	10.2.142.193 – 10.2.142.254	10.2.142.255
61	10.2.143.0/26	10.2.143.1 – 10.2.143.62	10.2.143.63
62	10.2.143.64/26	10.2.143.65 – 10.2.143.126	10.2.143.127
63	10.2.143.128/26	10.2.143.129 – 10.2.143.190	10.2.143.191
64	10.2.143.192/26	10.2.143.193 – 10.2.143.254	10.2.143.255

01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefix	subnet mask	addresses	hosts	in your /20
/0	0.0.0.0	4,294,967,296	4,294,967,294	-
/1	128.0.0.0	2,147,483,648	2,147,483,646	-
/2	192.0.0.0	1,073,741,824	1,073,741,822	-
/3	224.0.0.0	536,870,912	536,870,910	-
/4	240.0.0.0	268,435,456	268,435,454	-
/5	248.0.0.0	134,217,728	134,217,726	-
/6	252.0.0.0	67,108,864	67,108,862	-
/7	254.0.0.0	33,554,432	33,554,430	-
/8	255.0.0.0	16,777,216	16,777,214	-
/9	255.128.0.0	8,388,608	8,388,606	-
/10	255.192.0.0	4,194,304	4,194,302	-
/11	255.224.0.0	2,097,152	2,097,150	-
/12	255.240.0.0	1,048,576	1,048,574	-
/13	255.248.0.0	524,288	524,286	-
/14	255.252.0.0	262,144	262,142	-
/15	255.254.0.0	131,072	131,070	-
/16	255.255.0.0	65,536	65,534	-
/17	255.255.128.0	32,768	32,766	-
/18	255.255.192.0	16,384	16,382	-
/19	255.255.224.0	8,192	8,190	-
/20	255.255.240.0	4,096	4,094	1
/21	255.255.248.0	2,048	2,046	2 split →
/22	255.255.252.0	1,024	1,022	4 split →
/23	255.255.254.0	512	510	8 split →
/24	255.255.255.0	256	254	16 split →
/25	255.255.255.128	128	126	32 split →
/26	255.255.255.192	64	62	64 split →
/27	255.255.255.224	32	30	128 split →
/28	255.255.255.240	16	14	256 split →
/29	255.255.255.248	8	6	512 split →
/30	255.255.255.252	4	2	1,024 split →
/31	255.255.255.254	2	2	2,048 split →
/32	255.255.255.255	1	1	4,096 split →

02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →