ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.2.123.0/24
network10.2.123.0/24
broadcast10.2.123.255
first host10.2.123.1
last host10.2.123.254
subnet mask255.255.255.0
wildcard0.0.0.255
addresses256
usable hosts254
classA
ipcalc 10.2.123.0/24
address00001010.00000010.01111011.00000000
subnet mask11111111.11111111.11111111.00000000
network00001010.00000010.01111011.00000000
broadcast00001010.00000010.01111011.11111111
green = network part, grey = host part
hex0x0a027b00
decimal167934720
reverse dns0.123.2.10.in-addr.arpa
ipv4-mapped::ffff:a02:7b00

/24 split into /30 · 64 subnets

close ×
#networkhost rangebroadcast
110.2.123.0/3010.2.123.1 – 10.2.123.210.2.123.3
210.2.123.4/3010.2.123.5 – 10.2.123.610.2.123.7
310.2.123.8/3010.2.123.9 – 10.2.123.1010.2.123.11
410.2.123.12/3010.2.123.13 – 10.2.123.1410.2.123.15
510.2.123.16/3010.2.123.17 – 10.2.123.1810.2.123.19
610.2.123.20/3010.2.123.21 – 10.2.123.2210.2.123.23
710.2.123.24/3010.2.123.25 – 10.2.123.2610.2.123.27
810.2.123.28/3010.2.123.29 – 10.2.123.3010.2.123.31
910.2.123.32/3010.2.123.33 – 10.2.123.3410.2.123.35
1010.2.123.36/3010.2.123.37 – 10.2.123.3810.2.123.39
1110.2.123.40/3010.2.123.41 – 10.2.123.4210.2.123.43
1210.2.123.44/3010.2.123.45 – 10.2.123.4610.2.123.47
1310.2.123.48/3010.2.123.49 – 10.2.123.5010.2.123.51
1410.2.123.52/3010.2.123.53 – 10.2.123.5410.2.123.55
1510.2.123.56/3010.2.123.57 – 10.2.123.5810.2.123.59
1610.2.123.60/3010.2.123.61 – 10.2.123.6210.2.123.63
1710.2.123.64/3010.2.123.65 – 10.2.123.6610.2.123.67
1810.2.123.68/3010.2.123.69 – 10.2.123.7010.2.123.71
1910.2.123.72/3010.2.123.73 – 10.2.123.7410.2.123.75
2010.2.123.76/3010.2.123.77 – 10.2.123.7810.2.123.79
2110.2.123.80/3010.2.123.81 – 10.2.123.8210.2.123.83
2210.2.123.84/3010.2.123.85 – 10.2.123.8610.2.123.87
2310.2.123.88/3010.2.123.89 – 10.2.123.9010.2.123.91
2410.2.123.92/3010.2.123.93 – 10.2.123.9410.2.123.95
2510.2.123.96/3010.2.123.97 – 10.2.123.9810.2.123.99
2610.2.123.100/3010.2.123.101 – 10.2.123.10210.2.123.103
2710.2.123.104/3010.2.123.105 – 10.2.123.10610.2.123.107
2810.2.123.108/3010.2.123.109 – 10.2.123.11010.2.123.111
2910.2.123.112/3010.2.123.113 – 10.2.123.11410.2.123.115
3010.2.123.116/3010.2.123.117 – 10.2.123.11810.2.123.119
3110.2.123.120/3010.2.123.121 – 10.2.123.12210.2.123.123
3210.2.123.124/3010.2.123.125 – 10.2.123.12610.2.123.127
3310.2.123.128/3010.2.123.129 – 10.2.123.13010.2.123.131
3410.2.123.132/3010.2.123.133 – 10.2.123.13410.2.123.135
3510.2.123.136/3010.2.123.137 – 10.2.123.13810.2.123.139
3610.2.123.140/3010.2.123.141 – 10.2.123.14210.2.123.143
3710.2.123.144/3010.2.123.145 – 10.2.123.14610.2.123.147
3810.2.123.148/3010.2.123.149 – 10.2.123.15010.2.123.151
3910.2.123.152/3010.2.123.153 – 10.2.123.15410.2.123.155
4010.2.123.156/3010.2.123.157 – 10.2.123.15810.2.123.159
4110.2.123.160/3010.2.123.161 – 10.2.123.16210.2.123.163
4210.2.123.164/3010.2.123.165 – 10.2.123.16610.2.123.167
4310.2.123.168/3010.2.123.169 – 10.2.123.17010.2.123.171
4410.2.123.172/3010.2.123.173 – 10.2.123.17410.2.123.175
4510.2.123.176/3010.2.123.177 – 10.2.123.17810.2.123.179
4610.2.123.180/3010.2.123.181 – 10.2.123.18210.2.123.183
4710.2.123.184/3010.2.123.185 – 10.2.123.18610.2.123.187
4810.2.123.188/3010.2.123.189 – 10.2.123.19010.2.123.191
4910.2.123.192/3010.2.123.193 – 10.2.123.19410.2.123.195
5010.2.123.196/3010.2.123.197 – 10.2.123.19810.2.123.199
5110.2.123.200/3010.2.123.201 – 10.2.123.20210.2.123.203
5210.2.123.204/3010.2.123.205 – 10.2.123.20610.2.123.207
5310.2.123.208/3010.2.123.209 – 10.2.123.21010.2.123.211
5410.2.123.212/3010.2.123.213 – 10.2.123.21410.2.123.215
5510.2.123.216/3010.2.123.217 – 10.2.123.21810.2.123.219
5610.2.123.220/3010.2.123.221 – 10.2.123.22210.2.123.223
5710.2.123.224/3010.2.123.225 – 10.2.123.22610.2.123.227
5810.2.123.228/3010.2.123.229 – 10.2.123.23010.2.123.231
5910.2.123.232/3010.2.123.233 – 10.2.123.23410.2.123.235
6010.2.123.236/3010.2.123.237 – 10.2.123.23810.2.123.239
6110.2.123.240/3010.2.123.241 – 10.2.123.24210.2.123.243
6210.2.123.244/3010.2.123.245 – 10.2.123.24610.2.123.247
6310.2.123.248/3010.2.123.249 – 10.2.123.25010.2.123.251
6410.2.123.252/3010.2.123.253 – 10.2.123.25410.2.123.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /24
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.02562541
/25255.255.255.1281281262 split →
/26255.255.255.19264624 split →
/27255.255.255.22432308 split →
/28255.255.255.240161416 split →
/29255.255.255.2488632 split →
/30255.255.255.2524264 split →
/31255.255.255.25422128 split →
/32255.255.255.25511256 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →