IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

Try:192.168.1.10/24 10.0.0.0/8 172.16.5.4/20 203.0.113.9/29

IPv6 calculator →

private IP (RFC 1918)10.2.100.0/22

network10.2.100.0/22

broadcast10.2.103.255

first host10.2.100.1

last host10.2.103.254

subnet mask255.255.252.0

wildcard0.0.3.255

addresses1,024

usable hosts1,022

classA

ipcalc 10.2.100.0/22

address00001010.00000010.01100100.00000000

subnet mask11111111.11111111.11111100.00000000

network00001010.00000010.01100100.00000000

broadcast00001010.00000010.01100111.11111111

green = network part, grey = host part

hex0x0a026400

decimal167928832

reverse dns0.100.2.10.in-addr.arpa

ipv4-mapped::ffff:a02:6400

/22 split into /28 · 64 subnets

close ×

#	network	host range	broadcast
1	10.2.100.0/28	10.2.100.1 – 10.2.100.14	10.2.100.15
2	10.2.100.16/28	10.2.100.17 – 10.2.100.30	10.2.100.31
3	10.2.100.32/28	10.2.100.33 – 10.2.100.46	10.2.100.47
4	10.2.100.48/28	10.2.100.49 – 10.2.100.62	10.2.100.63
5	10.2.100.64/28	10.2.100.65 – 10.2.100.78	10.2.100.79
6	10.2.100.80/28	10.2.100.81 – 10.2.100.94	10.2.100.95
7	10.2.100.96/28	10.2.100.97 – 10.2.100.110	10.2.100.111
8	10.2.100.112/28	10.2.100.113 – 10.2.100.126	10.2.100.127
9	10.2.100.128/28	10.2.100.129 – 10.2.100.142	10.2.100.143
10	10.2.100.144/28	10.2.100.145 – 10.2.100.158	10.2.100.159
11	10.2.100.160/28	10.2.100.161 – 10.2.100.174	10.2.100.175
12	10.2.100.176/28	10.2.100.177 – 10.2.100.190	10.2.100.191
13	10.2.100.192/28	10.2.100.193 – 10.2.100.206	10.2.100.207
14	10.2.100.208/28	10.2.100.209 – 10.2.100.222	10.2.100.223
15	10.2.100.224/28	10.2.100.225 – 10.2.100.238	10.2.100.239
16	10.2.100.240/28	10.2.100.241 – 10.2.100.254	10.2.100.255
17	10.2.101.0/28	10.2.101.1 – 10.2.101.14	10.2.101.15
18	10.2.101.16/28	10.2.101.17 – 10.2.101.30	10.2.101.31
19	10.2.101.32/28	10.2.101.33 – 10.2.101.46	10.2.101.47
20	10.2.101.48/28	10.2.101.49 – 10.2.101.62	10.2.101.63
21	10.2.101.64/28	10.2.101.65 – 10.2.101.78	10.2.101.79
22	10.2.101.80/28	10.2.101.81 – 10.2.101.94	10.2.101.95
23	10.2.101.96/28	10.2.101.97 – 10.2.101.110	10.2.101.111
24	10.2.101.112/28	10.2.101.113 – 10.2.101.126	10.2.101.127
25	10.2.101.128/28	10.2.101.129 – 10.2.101.142	10.2.101.143
26	10.2.101.144/28	10.2.101.145 – 10.2.101.158	10.2.101.159
27	10.2.101.160/28	10.2.101.161 – 10.2.101.174	10.2.101.175
28	10.2.101.176/28	10.2.101.177 – 10.2.101.190	10.2.101.191
29	10.2.101.192/28	10.2.101.193 – 10.2.101.206	10.2.101.207
30	10.2.101.208/28	10.2.101.209 – 10.2.101.222	10.2.101.223
31	10.2.101.224/28	10.2.101.225 – 10.2.101.238	10.2.101.239
32	10.2.101.240/28	10.2.101.241 – 10.2.101.254	10.2.101.255
33	10.2.102.0/28	10.2.102.1 – 10.2.102.14	10.2.102.15
34	10.2.102.16/28	10.2.102.17 – 10.2.102.30	10.2.102.31
35	10.2.102.32/28	10.2.102.33 – 10.2.102.46	10.2.102.47
36	10.2.102.48/28	10.2.102.49 – 10.2.102.62	10.2.102.63
37	10.2.102.64/28	10.2.102.65 – 10.2.102.78	10.2.102.79
38	10.2.102.80/28	10.2.102.81 – 10.2.102.94	10.2.102.95
39	10.2.102.96/28	10.2.102.97 – 10.2.102.110	10.2.102.111
40	10.2.102.112/28	10.2.102.113 – 10.2.102.126	10.2.102.127
41	10.2.102.128/28	10.2.102.129 – 10.2.102.142	10.2.102.143
42	10.2.102.144/28	10.2.102.145 – 10.2.102.158	10.2.102.159
43	10.2.102.160/28	10.2.102.161 – 10.2.102.174	10.2.102.175
44	10.2.102.176/28	10.2.102.177 – 10.2.102.190	10.2.102.191
45	10.2.102.192/28	10.2.102.193 – 10.2.102.206	10.2.102.207
46	10.2.102.208/28	10.2.102.209 – 10.2.102.222	10.2.102.223
47	10.2.102.224/28	10.2.102.225 – 10.2.102.238	10.2.102.239
48	10.2.102.240/28	10.2.102.241 – 10.2.102.254	10.2.102.255
49	10.2.103.0/28	10.2.103.1 – 10.2.103.14	10.2.103.15
50	10.2.103.16/28	10.2.103.17 – 10.2.103.30	10.2.103.31
51	10.2.103.32/28	10.2.103.33 – 10.2.103.46	10.2.103.47
52	10.2.103.48/28	10.2.103.49 – 10.2.103.62	10.2.103.63
53	10.2.103.64/28	10.2.103.65 – 10.2.103.78	10.2.103.79
54	10.2.103.80/28	10.2.103.81 – 10.2.103.94	10.2.103.95
55	10.2.103.96/28	10.2.103.97 – 10.2.103.110	10.2.103.111
56	10.2.103.112/28	10.2.103.113 – 10.2.103.126	10.2.103.127
57	10.2.103.128/28	10.2.103.129 – 10.2.103.142	10.2.103.143
58	10.2.103.144/28	10.2.103.145 – 10.2.103.158	10.2.103.159
59	10.2.103.160/28	10.2.103.161 – 10.2.103.174	10.2.103.175
60	10.2.103.176/28	10.2.103.177 – 10.2.103.190	10.2.103.191
61	10.2.103.192/28	10.2.103.193 – 10.2.103.206	10.2.103.207
62	10.2.103.208/28	10.2.103.209 – 10.2.103.222	10.2.103.223
63	10.2.103.224/28	10.2.103.225 – 10.2.103.238	10.2.103.239
64	10.2.103.240/28	10.2.103.241 – 10.2.103.254	10.2.103.255

01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefix	subnet mask	addresses	hosts	in your /22
/0	0.0.0.0	4,294,967,296	4,294,967,294	-
/1	128.0.0.0	2,147,483,648	2,147,483,646	-
/2	192.0.0.0	1,073,741,824	1,073,741,822	-
/3	224.0.0.0	536,870,912	536,870,910	-
/4	240.0.0.0	268,435,456	268,435,454	-
/5	248.0.0.0	134,217,728	134,217,726	-
/6	252.0.0.0	67,108,864	67,108,862	-
/7	254.0.0.0	33,554,432	33,554,430	-
/8	255.0.0.0	16,777,216	16,777,214	-
/9	255.128.0.0	8,388,608	8,388,606	-
/10	255.192.0.0	4,194,304	4,194,302	-
/11	255.224.0.0	2,097,152	2,097,150	-
/12	255.240.0.0	1,048,576	1,048,574	-
/13	255.248.0.0	524,288	524,286	-
/14	255.252.0.0	262,144	262,142	-
/15	255.254.0.0	131,072	131,070	-
/16	255.255.0.0	65,536	65,534	-
/17	255.255.128.0	32,768	32,766	-
/18	255.255.192.0	16,384	16,382	-
/19	255.255.224.0	8,192	8,190	-
/20	255.255.240.0	4,096	4,094	-
/21	255.255.248.0	2,048	2,046	-
/22	255.255.252.0	1,024	1,022	1
/23	255.255.254.0	512	510	2 split →
/24	255.255.255.0	256	254	4 split →
/25	255.255.255.128	128	126	8 split →
/26	255.255.255.192	64	62	16 split →
/27	255.255.255.224	32	30	32 split →
/28	255.255.255.240	16	14	64 split →
/29	255.255.255.248	8	6	128 split →
/30	255.255.255.252	4	2	256 split →
/31	255.255.255.254	2	2	512 split →
/32	255.255.255.255	1	1	1,024 split →

02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →