ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.192.0.0/12
network10.192.0.0/12
broadcast10.207.255.255
first host10.192.0.1
last host10.207.255.254
subnet mask255.240.0.0
wildcard0.15.255.255
addresses1,048,576
usable hosts1,048,574
classA
ipcalc 10.192.0.0/12
address00001010.11000000.00000000.00000000
subnet mask11111111.11110000.00000000.00000000
network00001010.11000000.00000000.00000000
broadcast00001010.11001111.11111111.11111111
green = network part, grey = host part
hex0x0ac00000
decimal180355072
reverse dns0.0.192.10.in-addr.arpa
ipv4-mapped::ffff:ac0:0

/12 split into /18 · 64 subnets

close ×
#networkhost rangebroadcast
110.192.0.0/1810.192.0.1 – 10.192.63.25410.192.63.255
210.192.64.0/1810.192.64.1 – 10.192.127.25410.192.127.255
310.192.128.0/1810.192.128.1 – 10.192.191.25410.192.191.255
410.192.192.0/1810.192.192.1 – 10.192.255.25410.192.255.255
510.193.0.0/1810.193.0.1 – 10.193.63.25410.193.63.255
610.193.64.0/1810.193.64.1 – 10.193.127.25410.193.127.255
710.193.128.0/1810.193.128.1 – 10.193.191.25410.193.191.255
810.193.192.0/1810.193.192.1 – 10.193.255.25410.193.255.255
910.194.0.0/1810.194.0.1 – 10.194.63.25410.194.63.255
1010.194.64.0/1810.194.64.1 – 10.194.127.25410.194.127.255
1110.194.128.0/1810.194.128.1 – 10.194.191.25410.194.191.255
1210.194.192.0/1810.194.192.1 – 10.194.255.25410.194.255.255
1310.195.0.0/1810.195.0.1 – 10.195.63.25410.195.63.255
1410.195.64.0/1810.195.64.1 – 10.195.127.25410.195.127.255
1510.195.128.0/1810.195.128.1 – 10.195.191.25410.195.191.255
1610.195.192.0/1810.195.192.1 – 10.195.255.25410.195.255.255
1710.196.0.0/1810.196.0.1 – 10.196.63.25410.196.63.255
1810.196.64.0/1810.196.64.1 – 10.196.127.25410.196.127.255
1910.196.128.0/1810.196.128.1 – 10.196.191.25410.196.191.255
2010.196.192.0/1810.196.192.1 – 10.196.255.25410.196.255.255
2110.197.0.0/1810.197.0.1 – 10.197.63.25410.197.63.255
2210.197.64.0/1810.197.64.1 – 10.197.127.25410.197.127.255
2310.197.128.0/1810.197.128.1 – 10.197.191.25410.197.191.255
2410.197.192.0/1810.197.192.1 – 10.197.255.25410.197.255.255
2510.198.0.0/1810.198.0.1 – 10.198.63.25410.198.63.255
2610.198.64.0/1810.198.64.1 – 10.198.127.25410.198.127.255
2710.198.128.0/1810.198.128.1 – 10.198.191.25410.198.191.255
2810.198.192.0/1810.198.192.1 – 10.198.255.25410.198.255.255
2910.199.0.0/1810.199.0.1 – 10.199.63.25410.199.63.255
3010.199.64.0/1810.199.64.1 – 10.199.127.25410.199.127.255
3110.199.128.0/1810.199.128.1 – 10.199.191.25410.199.191.255
3210.199.192.0/1810.199.192.1 – 10.199.255.25410.199.255.255
3310.200.0.0/1810.200.0.1 – 10.200.63.25410.200.63.255
3410.200.64.0/1810.200.64.1 – 10.200.127.25410.200.127.255
3510.200.128.0/1810.200.128.1 – 10.200.191.25410.200.191.255
3610.200.192.0/1810.200.192.1 – 10.200.255.25410.200.255.255
3710.201.0.0/1810.201.0.1 – 10.201.63.25410.201.63.255
3810.201.64.0/1810.201.64.1 – 10.201.127.25410.201.127.255
3910.201.128.0/1810.201.128.1 – 10.201.191.25410.201.191.255
4010.201.192.0/1810.201.192.1 – 10.201.255.25410.201.255.255
4110.202.0.0/1810.202.0.1 – 10.202.63.25410.202.63.255
4210.202.64.0/1810.202.64.1 – 10.202.127.25410.202.127.255
4310.202.128.0/1810.202.128.1 – 10.202.191.25410.202.191.255
4410.202.192.0/1810.202.192.1 – 10.202.255.25410.202.255.255
4510.203.0.0/1810.203.0.1 – 10.203.63.25410.203.63.255
4610.203.64.0/1810.203.64.1 – 10.203.127.25410.203.127.255
4710.203.128.0/1810.203.128.1 – 10.203.191.25410.203.191.255
4810.203.192.0/1810.203.192.1 – 10.203.255.25410.203.255.255
4910.204.0.0/1810.204.0.1 – 10.204.63.25410.204.63.255
5010.204.64.0/1810.204.64.1 – 10.204.127.25410.204.127.255
5110.204.128.0/1810.204.128.1 – 10.204.191.25410.204.191.255
5210.204.192.0/1810.204.192.1 – 10.204.255.25410.204.255.255
5310.205.0.0/1810.205.0.1 – 10.205.63.25410.205.63.255
5410.205.64.0/1810.205.64.1 – 10.205.127.25410.205.127.255
5510.205.128.0/1810.205.128.1 – 10.205.191.25410.205.191.255
5610.205.192.0/1810.205.192.1 – 10.205.255.25410.205.255.255
5710.206.0.0/1810.206.0.1 – 10.206.63.25410.206.63.255
5810.206.64.0/1810.206.64.1 – 10.206.127.25410.206.127.255
5910.206.128.0/1810.206.128.1 – 10.206.191.25410.206.191.255
6010.206.192.0/1810.206.192.1 – 10.206.255.25410.206.255.255
6110.207.0.0/1810.207.0.1 – 10.207.63.25410.207.63.255
6210.207.64.0/1810.207.64.1 – 10.207.127.25410.207.127.255
6310.207.128.0/1810.207.128.1 – 10.207.191.25410.207.191.255
6410.207.192.0/1810.207.192.1 – 10.207.255.25410.207.255.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /12
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,5741
/13255.248.0.0524,288524,2862 split →
/14255.252.0.0262,144262,1424 split →
/15255.254.0.0131,072131,0708 split →
/16255.255.0.065,53665,53416 split →
/17255.255.128.032,76832,76632 split →
/18255.255.192.016,38416,38264 split →
/19255.255.224.08,1928,190128 split →
/20255.255.240.04,0964,094256 split →
/21255.255.248.02,0482,046512 split →
/22255.255.252.01,0241,0221,024 split →
/23255.255.254.05125102,048 split →
/24255.255.255.02562544,096 split →
/25255.255.255.1281281268,192 split →
/26255.255.255.192646216,384 split →
/27255.255.255.224323032,768 split →
/28255.255.255.240161465,536 split →
/29255.255.255.24886131,072 split →
/30255.255.255.25242262,144 split →
/31255.255.255.25422524,288 split →
/32255.255.255.255111,048,576 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →