ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.19.167.192/28
network10.19.167.192/28
broadcast10.19.167.207
first host10.19.167.193
last host10.19.167.206
subnet mask255.255.255.240
wildcard0.0.0.15
addresses16
usable hosts14
classA
ipcalc 10.19.167.192/28
address00001010.00010011.10100111.11000000
subnet mask11111111.11111111.11111111.11110000
network00001010.00010011.10100111.11000000
broadcast00001010.00010011.10100111.11001111
green = network part, grey = host part
hex0x0a13a7c0
decimal169060288
reverse dns192.167.19.10.in-addr.arpa
ipv4-mapped::ffff:a13:a7c0

/28 split into /32 · 16 subnets

close ×
#networkhost rangebroadcast
110.19.167.192/3210.19.167.192 – 10.19.167.19210.19.167.192
210.19.167.193/3210.19.167.193 – 10.19.167.19310.19.167.193
310.19.167.194/3210.19.167.194 – 10.19.167.19410.19.167.194
410.19.167.195/3210.19.167.195 – 10.19.167.19510.19.167.195
510.19.167.196/3210.19.167.196 – 10.19.167.19610.19.167.196
610.19.167.197/3210.19.167.197 – 10.19.167.19710.19.167.197
710.19.167.198/3210.19.167.198 – 10.19.167.19810.19.167.198
810.19.167.199/3210.19.167.199 – 10.19.167.19910.19.167.199
910.19.167.200/3210.19.167.200 – 10.19.167.20010.19.167.200
1010.19.167.201/3210.19.167.201 – 10.19.167.20110.19.167.201
1110.19.167.202/3210.19.167.202 – 10.19.167.20210.19.167.202
1210.19.167.203/3210.19.167.203 – 10.19.167.20310.19.167.203
1310.19.167.204/3210.19.167.204 – 10.19.167.20410.19.167.204
1410.19.167.205/3210.19.167.205 – 10.19.167.20510.19.167.205
1510.19.167.206/3210.19.167.206 – 10.19.167.20610.19.167.206
1610.19.167.207/3210.19.167.207 – 10.19.167.20710.19.167.207
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /28
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.0512510-
/24255.255.255.0256254-
/25255.255.255.128128126-
/26255.255.255.1926462-
/27255.255.255.2243230-
/28255.255.255.24016141
/29255.255.255.248862 split →
/30255.255.255.252424 split →
/31255.255.255.254228 split →
/32255.255.255.2551116 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →