ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.185.80.0/22
network10.185.80.0/22
broadcast10.185.83.255
first host10.185.80.1
last host10.185.83.254
subnet mask255.255.252.0
wildcard0.0.3.255
addresses1,024
usable hosts1,022
classA
ipcalc 10.185.80.0/22
address00001010.10111001.01010000.00000000
subnet mask11111111.11111111.11111100.00000000
network00001010.10111001.01010000.00000000
broadcast00001010.10111001.01010011.11111111
green = network part, grey = host part
hex0x0ab95000
decimal179916800
reverse dns0.80.185.10.in-addr.arpa
ipv4-mapped::ffff:ab9:5000

/22 split into /27 · 32 subnets

close ×
#networkhost rangebroadcast
110.185.80.0/2710.185.80.1 – 10.185.80.3010.185.80.31
210.185.80.32/2710.185.80.33 – 10.185.80.6210.185.80.63
310.185.80.64/2710.185.80.65 – 10.185.80.9410.185.80.95
410.185.80.96/2710.185.80.97 – 10.185.80.12610.185.80.127
510.185.80.128/2710.185.80.129 – 10.185.80.15810.185.80.159
610.185.80.160/2710.185.80.161 – 10.185.80.19010.185.80.191
710.185.80.192/2710.185.80.193 – 10.185.80.22210.185.80.223
810.185.80.224/2710.185.80.225 – 10.185.80.25410.185.80.255
910.185.81.0/2710.185.81.1 – 10.185.81.3010.185.81.31
1010.185.81.32/2710.185.81.33 – 10.185.81.6210.185.81.63
1110.185.81.64/2710.185.81.65 – 10.185.81.9410.185.81.95
1210.185.81.96/2710.185.81.97 – 10.185.81.12610.185.81.127
1310.185.81.128/2710.185.81.129 – 10.185.81.15810.185.81.159
1410.185.81.160/2710.185.81.161 – 10.185.81.19010.185.81.191
1510.185.81.192/2710.185.81.193 – 10.185.81.22210.185.81.223
1610.185.81.224/2710.185.81.225 – 10.185.81.25410.185.81.255
1710.185.82.0/2710.185.82.1 – 10.185.82.3010.185.82.31
1810.185.82.32/2710.185.82.33 – 10.185.82.6210.185.82.63
1910.185.82.64/2710.185.82.65 – 10.185.82.9410.185.82.95
2010.185.82.96/2710.185.82.97 – 10.185.82.12610.185.82.127
2110.185.82.128/2710.185.82.129 – 10.185.82.15810.185.82.159
2210.185.82.160/2710.185.82.161 – 10.185.82.19010.185.82.191
2310.185.82.192/2710.185.82.193 – 10.185.82.22210.185.82.223
2410.185.82.224/2710.185.82.225 – 10.185.82.25410.185.82.255
2510.185.83.0/2710.185.83.1 – 10.185.83.3010.185.83.31
2610.185.83.32/2710.185.83.33 – 10.185.83.6210.185.83.63
2710.185.83.64/2710.185.83.65 – 10.185.83.9410.185.83.95
2810.185.83.96/2710.185.83.97 – 10.185.83.12610.185.83.127
2910.185.83.128/2710.185.83.129 – 10.185.83.15810.185.83.159
3010.185.83.160/2710.185.83.161 – 10.185.83.19010.185.83.191
3110.185.83.192/2710.185.83.193 – 10.185.83.22210.185.83.223
3210.185.83.224/2710.185.83.225 – 10.185.83.25410.185.83.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /22
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,0221
/23255.255.254.05125102 split →
/24255.255.255.02562544 split →
/25255.255.255.1281281268 split →
/26255.255.255.192646216 split →
/27255.255.255.224323032 split →
/28255.255.255.240161464 split →
/29255.255.255.24886128 split →
/30255.255.255.25242256 split →
/31255.255.255.25422512 split →
/32255.255.255.255111,024 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →