ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.180.0.0/15
network10.180.0.0/15
broadcast10.181.255.255
first host10.180.0.1
last host10.181.255.254
subnet mask255.254.0.0
wildcard0.1.255.255
addresses131,072
usable hosts131,070
classA
ipcalc 10.180.0.0/15
address00001010.10110100.00000000.00000000
subnet mask11111111.11111110.00000000.00000000
network00001010.10110100.00000000.00000000
broadcast00001010.10110101.11111111.11111111
green = network part, grey = host part
hex0x0ab40000
decimal179568640
reverse dns0.0.180.10.in-addr.arpa
ipv4-mapped::ffff:ab4:0

/15 split into /25 · 1,024 subnets

close ×
#networkhost rangebroadcast
110.180.0.0/2510.180.0.1 – 10.180.0.12610.180.0.127
210.180.0.128/2510.180.0.129 – 10.180.0.25410.180.0.255
310.180.1.0/2510.180.1.1 – 10.180.1.12610.180.1.127
410.180.1.128/2510.180.1.129 – 10.180.1.25410.180.1.255
510.180.2.0/2510.180.2.1 – 10.180.2.12610.180.2.127
610.180.2.128/2510.180.2.129 – 10.180.2.25410.180.2.255
710.180.3.0/2510.180.3.1 – 10.180.3.12610.180.3.127
810.180.3.128/2510.180.3.129 – 10.180.3.25410.180.3.255
910.180.4.0/2510.180.4.1 – 10.180.4.12610.180.4.127
1010.180.4.128/2510.180.4.129 – 10.180.4.25410.180.4.255
1110.180.5.0/2510.180.5.1 – 10.180.5.12610.180.5.127
1210.180.5.128/2510.180.5.129 – 10.180.5.25410.180.5.255
1310.180.6.0/2510.180.6.1 – 10.180.6.12610.180.6.127
1410.180.6.128/2510.180.6.129 – 10.180.6.25410.180.6.255
1510.180.7.0/2510.180.7.1 – 10.180.7.12610.180.7.127
1610.180.7.128/2510.180.7.129 – 10.180.7.25410.180.7.255
1710.180.8.0/2510.180.8.1 – 10.180.8.12610.180.8.127
1810.180.8.128/2510.180.8.129 – 10.180.8.25410.180.8.255
1910.180.9.0/2510.180.9.1 – 10.180.9.12610.180.9.127
2010.180.9.128/2510.180.9.129 – 10.180.9.25410.180.9.255
2110.180.10.0/2510.180.10.1 – 10.180.10.12610.180.10.127
2210.180.10.128/2510.180.10.129 – 10.180.10.25410.180.10.255
2310.180.11.0/2510.180.11.1 – 10.180.11.12610.180.11.127
2410.180.11.128/2510.180.11.129 – 10.180.11.25410.180.11.255
2510.180.12.0/2510.180.12.1 – 10.180.12.12610.180.12.127
2610.180.12.128/2510.180.12.129 – 10.180.12.25410.180.12.255
2710.180.13.0/2510.180.13.1 – 10.180.13.12610.180.13.127
2810.180.13.128/2510.180.13.129 – 10.180.13.25410.180.13.255
2910.180.14.0/2510.180.14.1 – 10.180.14.12610.180.14.127
3010.180.14.128/2510.180.14.129 – 10.180.14.25410.180.14.255
3110.180.15.0/2510.180.15.1 – 10.180.15.12610.180.15.127
3210.180.15.128/2510.180.15.129 – 10.180.15.25410.180.15.255
3310.180.16.0/2510.180.16.1 – 10.180.16.12610.180.16.127
3410.180.16.128/2510.180.16.129 – 10.180.16.25410.180.16.255
3510.180.17.0/2510.180.17.1 – 10.180.17.12610.180.17.127
3610.180.17.128/2510.180.17.129 – 10.180.17.25410.180.17.255
3710.180.18.0/2510.180.18.1 – 10.180.18.12610.180.18.127
3810.180.18.128/2510.180.18.129 – 10.180.18.25410.180.18.255
3910.180.19.0/2510.180.19.1 – 10.180.19.12610.180.19.127
4010.180.19.128/2510.180.19.129 – 10.180.19.25410.180.19.255
4110.180.20.0/2510.180.20.1 – 10.180.20.12610.180.20.127
4210.180.20.128/2510.180.20.129 – 10.180.20.25410.180.20.255
4310.180.21.0/2510.180.21.1 – 10.180.21.12610.180.21.127
4410.180.21.128/2510.180.21.129 – 10.180.21.25410.180.21.255
4510.180.22.0/2510.180.22.1 – 10.180.22.12610.180.22.127
4610.180.22.128/2510.180.22.129 – 10.180.22.25410.180.22.255
4710.180.23.0/2510.180.23.1 – 10.180.23.12610.180.23.127
4810.180.23.128/2510.180.23.129 – 10.180.23.25410.180.23.255
4910.180.24.0/2510.180.24.1 – 10.180.24.12610.180.24.127
5010.180.24.128/2510.180.24.129 – 10.180.24.25410.180.24.255
5110.180.25.0/2510.180.25.1 – 10.180.25.12610.180.25.127
5210.180.25.128/2510.180.25.129 – 10.180.25.25410.180.25.255
5310.180.26.0/2510.180.26.1 – 10.180.26.12610.180.26.127
5410.180.26.128/2510.180.26.129 – 10.180.26.25410.180.26.255
5510.180.27.0/2510.180.27.1 – 10.180.27.12610.180.27.127
5610.180.27.128/2510.180.27.129 – 10.180.27.25410.180.27.255
5710.180.28.0/2510.180.28.1 – 10.180.28.12610.180.28.127
5810.180.28.128/2510.180.28.129 – 10.180.28.25410.180.28.255
5910.180.29.0/2510.180.29.1 – 10.180.29.12610.180.29.127
6010.180.29.128/2510.180.29.129 – 10.180.29.25410.180.29.255
6110.180.30.0/2510.180.30.1 – 10.180.30.12610.180.30.127
6210.180.30.128/2510.180.30.129 – 10.180.30.25410.180.30.255
6310.180.31.0/2510.180.31.1 – 10.180.31.12610.180.31.127
6410.180.31.128/2510.180.31.129 – 10.180.31.25410.180.31.255
6510.180.32.0/2510.180.32.1 – 10.180.32.12610.180.32.127
6610.180.32.128/2510.180.32.129 – 10.180.32.25410.180.32.255
6710.180.33.0/2510.180.33.1 – 10.180.33.12610.180.33.127
6810.180.33.128/2510.180.33.129 – 10.180.33.25410.180.33.255
6910.180.34.0/2510.180.34.1 – 10.180.34.12610.180.34.127
7010.180.34.128/2510.180.34.129 – 10.180.34.25410.180.34.255
7110.180.35.0/2510.180.35.1 – 10.180.35.12610.180.35.127
7210.180.35.128/2510.180.35.129 – 10.180.35.25410.180.35.255
7310.180.36.0/2510.180.36.1 – 10.180.36.12610.180.36.127
7410.180.36.128/2510.180.36.129 – 10.180.36.25410.180.36.255
7510.180.37.0/2510.180.37.1 – 10.180.37.12610.180.37.127
7610.180.37.128/2510.180.37.129 – 10.180.37.25410.180.37.255
7710.180.38.0/2510.180.38.1 – 10.180.38.12610.180.38.127
7810.180.38.128/2510.180.38.129 – 10.180.38.25410.180.38.255
7910.180.39.0/2510.180.39.1 – 10.180.39.12610.180.39.127
8010.180.39.128/2510.180.39.129 – 10.180.39.25410.180.39.255
8110.180.40.0/2510.180.40.1 – 10.180.40.12610.180.40.127
8210.180.40.128/2510.180.40.129 – 10.180.40.25410.180.40.255
8310.180.41.0/2510.180.41.1 – 10.180.41.12610.180.41.127
8410.180.41.128/2510.180.41.129 – 10.180.41.25410.180.41.255
8510.180.42.0/2510.180.42.1 – 10.180.42.12610.180.42.127
8610.180.42.128/2510.180.42.129 – 10.180.42.25410.180.42.255
8710.180.43.0/2510.180.43.1 – 10.180.43.12610.180.43.127
8810.180.43.128/2510.180.43.129 – 10.180.43.25410.180.43.255
8910.180.44.0/2510.180.44.1 – 10.180.44.12610.180.44.127
9010.180.44.128/2510.180.44.129 – 10.180.44.25410.180.44.255
9110.180.45.0/2510.180.45.1 – 10.180.45.12610.180.45.127
9210.180.45.128/2510.180.45.129 – 10.180.45.25410.180.45.255
9310.180.46.0/2510.180.46.1 – 10.180.46.12610.180.46.127
9410.180.46.128/2510.180.46.129 – 10.180.46.25410.180.46.255
9510.180.47.0/2510.180.47.1 – 10.180.47.12610.180.47.127
9610.180.47.128/2510.180.47.129 – 10.180.47.25410.180.47.255
9710.180.48.0/2510.180.48.1 – 10.180.48.12610.180.48.127
9810.180.48.128/2510.180.48.129 – 10.180.48.25410.180.48.255
9910.180.49.0/2510.180.49.1 – 10.180.49.12610.180.49.127
10010.180.49.128/2510.180.49.129 – 10.180.49.25410.180.49.255
10110.180.50.0/2510.180.50.1 – 10.180.50.12610.180.50.127
10210.180.50.128/2510.180.50.129 – 10.180.50.25410.180.50.255
10310.180.51.0/2510.180.51.1 – 10.180.51.12610.180.51.127
10410.180.51.128/2510.180.51.129 – 10.180.51.25410.180.51.255
10510.180.52.0/2510.180.52.1 – 10.180.52.12610.180.52.127
10610.180.52.128/2510.180.52.129 – 10.180.52.25410.180.52.255
10710.180.53.0/2510.180.53.1 – 10.180.53.12610.180.53.127
10810.180.53.128/2510.180.53.129 – 10.180.53.25410.180.53.255
10910.180.54.0/2510.180.54.1 – 10.180.54.12610.180.54.127
11010.180.54.128/2510.180.54.129 – 10.180.54.25410.180.54.255
11110.180.55.0/2510.180.55.1 – 10.180.55.12610.180.55.127
11210.180.55.128/2510.180.55.129 – 10.180.55.25410.180.55.255
11310.180.56.0/2510.180.56.1 – 10.180.56.12610.180.56.127
11410.180.56.128/2510.180.56.129 – 10.180.56.25410.180.56.255
11510.180.57.0/2510.180.57.1 – 10.180.57.12610.180.57.127
11610.180.57.128/2510.180.57.129 – 10.180.57.25410.180.57.255
11710.180.58.0/2510.180.58.1 – 10.180.58.12610.180.58.127
11810.180.58.128/2510.180.58.129 – 10.180.58.25410.180.58.255
11910.180.59.0/2510.180.59.1 – 10.180.59.12610.180.59.127
12010.180.59.128/2510.180.59.129 – 10.180.59.25410.180.59.255
12110.180.60.0/2510.180.60.1 – 10.180.60.12610.180.60.127
12210.180.60.128/2510.180.60.129 – 10.180.60.25410.180.60.255
12310.180.61.0/2510.180.61.1 – 10.180.61.12610.180.61.127
12410.180.61.128/2510.180.61.129 – 10.180.61.25410.180.61.255
12510.180.62.0/2510.180.62.1 – 10.180.62.12610.180.62.127
12610.180.62.128/2510.180.62.129 – 10.180.62.25410.180.62.255
12710.180.63.0/2510.180.63.1 – 10.180.63.12610.180.63.127
12810.180.63.128/2510.180.63.129 – 10.180.63.25410.180.63.255
12910.180.64.0/2510.180.64.1 – 10.180.64.12610.180.64.127
13010.180.64.128/2510.180.64.129 – 10.180.64.25410.180.64.255
13110.180.65.0/2510.180.65.1 – 10.180.65.12610.180.65.127
13210.180.65.128/2510.180.65.129 – 10.180.65.25410.180.65.255
13310.180.66.0/2510.180.66.1 – 10.180.66.12610.180.66.127
13410.180.66.128/2510.180.66.129 – 10.180.66.25410.180.66.255
13510.180.67.0/2510.180.67.1 – 10.180.67.12610.180.67.127
13610.180.67.128/2510.180.67.129 – 10.180.67.25410.180.67.255
13710.180.68.0/2510.180.68.1 – 10.180.68.12610.180.68.127
13810.180.68.128/2510.180.68.129 – 10.180.68.25410.180.68.255
13910.180.69.0/2510.180.69.1 – 10.180.69.12610.180.69.127
14010.180.69.128/2510.180.69.129 – 10.180.69.25410.180.69.255
14110.180.70.0/2510.180.70.1 – 10.180.70.12610.180.70.127
14210.180.70.128/2510.180.70.129 – 10.180.70.25410.180.70.255
14310.180.71.0/2510.180.71.1 – 10.180.71.12610.180.71.127
14410.180.71.128/2510.180.71.129 – 10.180.71.25410.180.71.255
14510.180.72.0/2510.180.72.1 – 10.180.72.12610.180.72.127
14610.180.72.128/2510.180.72.129 – 10.180.72.25410.180.72.255
14710.180.73.0/2510.180.73.1 – 10.180.73.12610.180.73.127
14810.180.73.128/2510.180.73.129 – 10.180.73.25410.180.73.255
14910.180.74.0/2510.180.74.1 – 10.180.74.12610.180.74.127
15010.180.74.128/2510.180.74.129 – 10.180.74.25410.180.74.255
15110.180.75.0/2510.180.75.1 – 10.180.75.12610.180.75.127
15210.180.75.128/2510.180.75.129 – 10.180.75.25410.180.75.255
15310.180.76.0/2510.180.76.1 – 10.180.76.12610.180.76.127
15410.180.76.128/2510.180.76.129 – 10.180.76.25410.180.76.255
15510.180.77.0/2510.180.77.1 – 10.180.77.12610.180.77.127
15610.180.77.128/2510.180.77.129 – 10.180.77.25410.180.77.255
15710.180.78.0/2510.180.78.1 – 10.180.78.12610.180.78.127
15810.180.78.128/2510.180.78.129 – 10.180.78.25410.180.78.255
15910.180.79.0/2510.180.79.1 – 10.180.79.12610.180.79.127
16010.180.79.128/2510.180.79.129 – 10.180.79.25410.180.79.255
16110.180.80.0/2510.180.80.1 – 10.180.80.12610.180.80.127
16210.180.80.128/2510.180.80.129 – 10.180.80.25410.180.80.255
16310.180.81.0/2510.180.81.1 – 10.180.81.12610.180.81.127
16410.180.81.128/2510.180.81.129 – 10.180.81.25410.180.81.255
16510.180.82.0/2510.180.82.1 – 10.180.82.12610.180.82.127
16610.180.82.128/2510.180.82.129 – 10.180.82.25410.180.82.255
16710.180.83.0/2510.180.83.1 – 10.180.83.12610.180.83.127
16810.180.83.128/2510.180.83.129 – 10.180.83.25410.180.83.255
16910.180.84.0/2510.180.84.1 – 10.180.84.12610.180.84.127
17010.180.84.128/2510.180.84.129 – 10.180.84.25410.180.84.255
17110.180.85.0/2510.180.85.1 – 10.180.85.12610.180.85.127
17210.180.85.128/2510.180.85.129 – 10.180.85.25410.180.85.255
17310.180.86.0/2510.180.86.1 – 10.180.86.12610.180.86.127
17410.180.86.128/2510.180.86.129 – 10.180.86.25410.180.86.255
17510.180.87.0/2510.180.87.1 – 10.180.87.12610.180.87.127
17610.180.87.128/2510.180.87.129 – 10.180.87.25410.180.87.255
17710.180.88.0/2510.180.88.1 – 10.180.88.12610.180.88.127
17810.180.88.128/2510.180.88.129 – 10.180.88.25410.180.88.255
17910.180.89.0/2510.180.89.1 – 10.180.89.12610.180.89.127
18010.180.89.128/2510.180.89.129 – 10.180.89.25410.180.89.255
18110.180.90.0/2510.180.90.1 – 10.180.90.12610.180.90.127
18210.180.90.128/2510.180.90.129 – 10.180.90.25410.180.90.255
18310.180.91.0/2510.180.91.1 – 10.180.91.12610.180.91.127
18410.180.91.128/2510.180.91.129 – 10.180.91.25410.180.91.255
18510.180.92.0/2510.180.92.1 – 10.180.92.12610.180.92.127
18610.180.92.128/2510.180.92.129 – 10.180.92.25410.180.92.255
18710.180.93.0/2510.180.93.1 – 10.180.93.12610.180.93.127
18810.180.93.128/2510.180.93.129 – 10.180.93.25410.180.93.255
18910.180.94.0/2510.180.94.1 – 10.180.94.12610.180.94.127
19010.180.94.128/2510.180.94.129 – 10.180.94.25410.180.94.255
19110.180.95.0/2510.180.95.1 – 10.180.95.12610.180.95.127
19210.180.95.128/2510.180.95.129 – 10.180.95.25410.180.95.255
19310.180.96.0/2510.180.96.1 – 10.180.96.12610.180.96.127
19410.180.96.128/2510.180.96.129 – 10.180.96.25410.180.96.255
19510.180.97.0/2510.180.97.1 – 10.180.97.12610.180.97.127
19610.180.97.128/2510.180.97.129 – 10.180.97.25410.180.97.255
19710.180.98.0/2510.180.98.1 – 10.180.98.12610.180.98.127
19810.180.98.128/2510.180.98.129 – 10.180.98.25410.180.98.255
19910.180.99.0/2510.180.99.1 – 10.180.99.12610.180.99.127
20010.180.99.128/2510.180.99.129 – 10.180.99.25410.180.99.255
20110.180.100.0/2510.180.100.1 – 10.180.100.12610.180.100.127
20210.180.100.128/2510.180.100.129 – 10.180.100.25410.180.100.255
20310.180.101.0/2510.180.101.1 – 10.180.101.12610.180.101.127
20410.180.101.128/2510.180.101.129 – 10.180.101.25410.180.101.255
20510.180.102.0/2510.180.102.1 – 10.180.102.12610.180.102.127
20610.180.102.128/2510.180.102.129 – 10.180.102.25410.180.102.255
20710.180.103.0/2510.180.103.1 – 10.180.103.12610.180.103.127
20810.180.103.128/2510.180.103.129 – 10.180.103.25410.180.103.255
20910.180.104.0/2510.180.104.1 – 10.180.104.12610.180.104.127
21010.180.104.128/2510.180.104.129 – 10.180.104.25410.180.104.255
21110.180.105.0/2510.180.105.1 – 10.180.105.12610.180.105.127
21210.180.105.128/2510.180.105.129 – 10.180.105.25410.180.105.255
21310.180.106.0/2510.180.106.1 – 10.180.106.12610.180.106.127
21410.180.106.128/2510.180.106.129 – 10.180.106.25410.180.106.255
21510.180.107.0/2510.180.107.1 – 10.180.107.12610.180.107.127
21610.180.107.128/2510.180.107.129 – 10.180.107.25410.180.107.255
21710.180.108.0/2510.180.108.1 – 10.180.108.12610.180.108.127
21810.180.108.128/2510.180.108.129 – 10.180.108.25410.180.108.255
21910.180.109.0/2510.180.109.1 – 10.180.109.12610.180.109.127
22010.180.109.128/2510.180.109.129 – 10.180.109.25410.180.109.255
22110.180.110.0/2510.180.110.1 – 10.180.110.12610.180.110.127
22210.180.110.128/2510.180.110.129 – 10.180.110.25410.180.110.255
22310.180.111.0/2510.180.111.1 – 10.180.111.12610.180.111.127
22410.180.111.128/2510.180.111.129 – 10.180.111.25410.180.111.255
22510.180.112.0/2510.180.112.1 – 10.180.112.12610.180.112.127
22610.180.112.128/2510.180.112.129 – 10.180.112.25410.180.112.255
22710.180.113.0/2510.180.113.1 – 10.180.113.12610.180.113.127
22810.180.113.128/2510.180.113.129 – 10.180.113.25410.180.113.255
22910.180.114.0/2510.180.114.1 – 10.180.114.12610.180.114.127
23010.180.114.128/2510.180.114.129 – 10.180.114.25410.180.114.255
23110.180.115.0/2510.180.115.1 – 10.180.115.12610.180.115.127
23210.180.115.128/2510.180.115.129 – 10.180.115.25410.180.115.255
23310.180.116.0/2510.180.116.1 – 10.180.116.12610.180.116.127
23410.180.116.128/2510.180.116.129 – 10.180.116.25410.180.116.255
23510.180.117.0/2510.180.117.1 – 10.180.117.12610.180.117.127
23610.180.117.128/2510.180.117.129 – 10.180.117.25410.180.117.255
23710.180.118.0/2510.180.118.1 – 10.180.118.12610.180.118.127
23810.180.118.128/2510.180.118.129 – 10.180.118.25410.180.118.255
23910.180.119.0/2510.180.119.1 – 10.180.119.12610.180.119.127
24010.180.119.128/2510.180.119.129 – 10.180.119.25410.180.119.255
24110.180.120.0/2510.180.120.1 – 10.180.120.12610.180.120.127
24210.180.120.128/2510.180.120.129 – 10.180.120.25410.180.120.255
24310.180.121.0/2510.180.121.1 – 10.180.121.12610.180.121.127
24410.180.121.128/2510.180.121.129 – 10.180.121.25410.180.121.255
24510.180.122.0/2510.180.122.1 – 10.180.122.12610.180.122.127
24610.180.122.128/2510.180.122.129 – 10.180.122.25410.180.122.255
24710.180.123.0/2510.180.123.1 – 10.180.123.12610.180.123.127
24810.180.123.128/2510.180.123.129 – 10.180.123.25410.180.123.255
24910.180.124.0/2510.180.124.1 – 10.180.124.12610.180.124.127
25010.180.124.128/2510.180.124.129 – 10.180.124.25410.180.124.255
25110.180.125.0/2510.180.125.1 – 10.180.125.12610.180.125.127
25210.180.125.128/2510.180.125.129 – 10.180.125.25410.180.125.255
25310.180.126.0/2510.180.126.1 – 10.180.126.12610.180.126.127
25410.180.126.128/2510.180.126.129 – 10.180.126.25410.180.126.255
25510.180.127.0/2510.180.127.1 – 10.180.127.12610.180.127.127
25610.180.127.128/2510.180.127.129 – 10.180.127.25410.180.127.255

showing 256 of 1,024

01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /15
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,0701
/16255.255.0.065,53665,5342 split →
/17255.255.128.032,76832,7664 split →
/18255.255.192.016,38416,3828 split →
/19255.255.224.08,1928,19016 split →
/20255.255.240.04,0964,09432 split →
/21255.255.248.02,0482,04664 split →
/22255.255.252.01,0241,022128 split →
/23255.255.254.0512510256 split →
/24255.255.255.0256254512 split →
/25255.255.255.1281281261,024 split →
/26255.255.255.19264622,048 split →
/27255.255.255.22432304,096 split →
/28255.255.255.24016148,192 split →
/29255.255.255.2488616,384 split →
/30255.255.255.2524232,768 split →
/31255.255.255.2542265,536 split →
/32255.255.255.25511131,072 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →