ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
Try:192.168.1.10/2410.0.0.0/8172.16.5.4/20203.0.113.9/29
IPv6 calculator →
private IP (RFC 1918)10.17.128.0/18
network10.17.128.0/18
broadcast10.17.191.255
first host10.17.128.1
last host10.17.191.254
subnet mask255.255.192.0
wildcard0.0.63.255
addresses16,384
usable hosts16,382
classA
ipcalc 10.17.128.0/18
address00001010.00010001.10000000.00000000
subnet mask11111111.11111111.11000000.00000000
network00001010.00010001.10000000.00000000
broadcast00001010.00010001.10111111.11111111
green = network part, grey = host part
hex0x0a118000
decimal168919040
reverse dns0.128.17.10.in-addr.arpa
ipv4-mapped::ffff:a11:8000

/18 split into /24 · 64 subnets

close ×
#networkhost rangebroadcast
110.17.128.0/2410.17.128.1 – 10.17.128.25410.17.128.255
210.17.129.0/2410.17.129.1 – 10.17.129.25410.17.129.255
310.17.130.0/2410.17.130.1 – 10.17.130.25410.17.130.255
410.17.131.0/2410.17.131.1 – 10.17.131.25410.17.131.255
510.17.132.0/2410.17.132.1 – 10.17.132.25410.17.132.255
610.17.133.0/2410.17.133.1 – 10.17.133.25410.17.133.255
710.17.134.0/2410.17.134.1 – 10.17.134.25410.17.134.255
810.17.135.0/2410.17.135.1 – 10.17.135.25410.17.135.255
910.17.136.0/2410.17.136.1 – 10.17.136.25410.17.136.255
1010.17.137.0/2410.17.137.1 – 10.17.137.25410.17.137.255
1110.17.138.0/2410.17.138.1 – 10.17.138.25410.17.138.255
1210.17.139.0/2410.17.139.1 – 10.17.139.25410.17.139.255
1310.17.140.0/2410.17.140.1 – 10.17.140.25410.17.140.255
1410.17.141.0/2410.17.141.1 – 10.17.141.25410.17.141.255
1510.17.142.0/2410.17.142.1 – 10.17.142.25410.17.142.255
1610.17.143.0/2410.17.143.1 – 10.17.143.25410.17.143.255
1710.17.144.0/2410.17.144.1 – 10.17.144.25410.17.144.255
1810.17.145.0/2410.17.145.1 – 10.17.145.25410.17.145.255
1910.17.146.0/2410.17.146.1 – 10.17.146.25410.17.146.255
2010.17.147.0/2410.17.147.1 – 10.17.147.25410.17.147.255
2110.17.148.0/2410.17.148.1 – 10.17.148.25410.17.148.255
2210.17.149.0/2410.17.149.1 – 10.17.149.25410.17.149.255
2310.17.150.0/2410.17.150.1 – 10.17.150.25410.17.150.255
2410.17.151.0/2410.17.151.1 – 10.17.151.25410.17.151.255
2510.17.152.0/2410.17.152.1 – 10.17.152.25410.17.152.255
2610.17.153.0/2410.17.153.1 – 10.17.153.25410.17.153.255
2710.17.154.0/2410.17.154.1 – 10.17.154.25410.17.154.255
2810.17.155.0/2410.17.155.1 – 10.17.155.25410.17.155.255
2910.17.156.0/2410.17.156.1 – 10.17.156.25410.17.156.255
3010.17.157.0/2410.17.157.1 – 10.17.157.25410.17.157.255
3110.17.158.0/2410.17.158.1 – 10.17.158.25410.17.158.255
3210.17.159.0/2410.17.159.1 – 10.17.159.25410.17.159.255
3310.17.160.0/2410.17.160.1 – 10.17.160.25410.17.160.255
3410.17.161.0/2410.17.161.1 – 10.17.161.25410.17.161.255
3510.17.162.0/2410.17.162.1 – 10.17.162.25410.17.162.255
3610.17.163.0/2410.17.163.1 – 10.17.163.25410.17.163.255
3710.17.164.0/2410.17.164.1 – 10.17.164.25410.17.164.255
3810.17.165.0/2410.17.165.1 – 10.17.165.25410.17.165.255
3910.17.166.0/2410.17.166.1 – 10.17.166.25410.17.166.255
4010.17.167.0/2410.17.167.1 – 10.17.167.25410.17.167.255
4110.17.168.0/2410.17.168.1 – 10.17.168.25410.17.168.255
4210.17.169.0/2410.17.169.1 – 10.17.169.25410.17.169.255
4310.17.170.0/2410.17.170.1 – 10.17.170.25410.17.170.255
4410.17.171.0/2410.17.171.1 – 10.17.171.25410.17.171.255
4510.17.172.0/2410.17.172.1 – 10.17.172.25410.17.172.255
4610.17.173.0/2410.17.173.1 – 10.17.173.25410.17.173.255
4710.17.174.0/2410.17.174.1 – 10.17.174.25410.17.174.255
4810.17.175.0/2410.17.175.1 – 10.17.175.25410.17.175.255
4910.17.176.0/2410.17.176.1 – 10.17.176.25410.17.176.255
5010.17.177.0/2410.17.177.1 – 10.17.177.25410.17.177.255
5110.17.178.0/2410.17.178.1 – 10.17.178.25410.17.178.255
5210.17.179.0/2410.17.179.1 – 10.17.179.25410.17.179.255
5310.17.180.0/2410.17.180.1 – 10.17.180.25410.17.180.255
5410.17.181.0/2410.17.181.1 – 10.17.181.25410.17.181.255
5510.17.182.0/2410.17.182.1 – 10.17.182.25410.17.182.255
5610.17.183.0/2410.17.183.1 – 10.17.183.25410.17.183.255
5710.17.184.0/2410.17.184.1 – 10.17.184.25410.17.184.255
5810.17.185.0/2410.17.185.1 – 10.17.185.25410.17.185.255
5910.17.186.0/2410.17.186.1 – 10.17.186.25410.17.186.255
6010.17.187.0/2410.17.187.1 – 10.17.187.25410.17.187.255
6110.17.188.0/2410.17.188.1 – 10.17.188.25410.17.188.255
6210.17.189.0/2410.17.189.1 – 10.17.189.25410.17.189.255
6310.17.190.0/2410.17.190.1 – 10.17.190.25410.17.190.255
6410.17.191.0/2410.17.191.1 – 10.17.191.25410.17.191.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /18
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,3821
/19255.255.224.08,1928,1902 split →
/20255.255.240.04,0964,0944 split →
/21255.255.248.02,0482,0468 split →
/22255.255.252.01,0241,02216 split →
/23255.255.254.051251032 split →
/24255.255.255.025625464 split →
/25255.255.255.128128126128 split →
/26255.255.255.1926462256 split →
/27255.255.255.2243230512 split →
/28255.255.255.24016141,024 split →
/29255.255.255.248862,048 split →
/30255.255.255.252424,096 split →
/31255.255.255.254228,192 split →
/32255.255.255.2551116,384 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →