ip
ipku.in

IPv4 Subnet Calculator

Enter an IP with a CIDR prefix or a subnet mask to see its network, broadcast, host range, and host count. You can also split the network into smaller subnets.

$ ipcalc
private IP (RFC 1918)10.167.98.0/23
network10.167.98.0/23
broadcast10.167.99.255
first host10.167.98.1
last host10.167.99.254
subnet mask255.255.254.0
wildcard0.0.1.255
addresses512
usable hosts510
classA
ipcalc 10.167.98.0/23
address00001010.10100111.01100010.00000000
subnet mask11111111.11111111.11111110.00000000
network00001010.10100111.01100010.00000000
broadcast00001010.10100111.01100011.11111111
green = network part, grey = host part
hex0x0aa76200
decimal178741760
reverse dns0.98.167.10.in-addr.arpa
ipv4-mapped::ffff:aa7:6200

/23 split into /29 · 64 subnets

close ×
#networkhost rangebroadcast
110.167.98.0/2910.167.98.1 – 10.167.98.610.167.98.7
210.167.98.8/2910.167.98.9 – 10.167.98.1410.167.98.15
310.167.98.16/2910.167.98.17 – 10.167.98.2210.167.98.23
410.167.98.24/2910.167.98.25 – 10.167.98.3010.167.98.31
510.167.98.32/2910.167.98.33 – 10.167.98.3810.167.98.39
610.167.98.40/2910.167.98.41 – 10.167.98.4610.167.98.47
710.167.98.48/2910.167.98.49 – 10.167.98.5410.167.98.55
810.167.98.56/2910.167.98.57 – 10.167.98.6210.167.98.63
910.167.98.64/2910.167.98.65 – 10.167.98.7010.167.98.71
1010.167.98.72/2910.167.98.73 – 10.167.98.7810.167.98.79
1110.167.98.80/2910.167.98.81 – 10.167.98.8610.167.98.87
1210.167.98.88/2910.167.98.89 – 10.167.98.9410.167.98.95
1310.167.98.96/2910.167.98.97 – 10.167.98.10210.167.98.103
1410.167.98.104/2910.167.98.105 – 10.167.98.11010.167.98.111
1510.167.98.112/2910.167.98.113 – 10.167.98.11810.167.98.119
1610.167.98.120/2910.167.98.121 – 10.167.98.12610.167.98.127
1710.167.98.128/2910.167.98.129 – 10.167.98.13410.167.98.135
1810.167.98.136/2910.167.98.137 – 10.167.98.14210.167.98.143
1910.167.98.144/2910.167.98.145 – 10.167.98.15010.167.98.151
2010.167.98.152/2910.167.98.153 – 10.167.98.15810.167.98.159
2110.167.98.160/2910.167.98.161 – 10.167.98.16610.167.98.167
2210.167.98.168/2910.167.98.169 – 10.167.98.17410.167.98.175
2310.167.98.176/2910.167.98.177 – 10.167.98.18210.167.98.183
2410.167.98.184/2910.167.98.185 – 10.167.98.19010.167.98.191
2510.167.98.192/2910.167.98.193 – 10.167.98.19810.167.98.199
2610.167.98.200/2910.167.98.201 – 10.167.98.20610.167.98.207
2710.167.98.208/2910.167.98.209 – 10.167.98.21410.167.98.215
2810.167.98.216/2910.167.98.217 – 10.167.98.22210.167.98.223
2910.167.98.224/2910.167.98.225 – 10.167.98.23010.167.98.231
3010.167.98.232/2910.167.98.233 – 10.167.98.23810.167.98.239
3110.167.98.240/2910.167.98.241 – 10.167.98.24610.167.98.247
3210.167.98.248/2910.167.98.249 – 10.167.98.25410.167.98.255
3310.167.99.0/2910.167.99.1 – 10.167.99.610.167.99.7
3410.167.99.8/2910.167.99.9 – 10.167.99.1410.167.99.15
3510.167.99.16/2910.167.99.17 – 10.167.99.2210.167.99.23
3610.167.99.24/2910.167.99.25 – 10.167.99.3010.167.99.31
3710.167.99.32/2910.167.99.33 – 10.167.99.3810.167.99.39
3810.167.99.40/2910.167.99.41 – 10.167.99.4610.167.99.47
3910.167.99.48/2910.167.99.49 – 10.167.99.5410.167.99.55
4010.167.99.56/2910.167.99.57 – 10.167.99.6210.167.99.63
4110.167.99.64/2910.167.99.65 – 10.167.99.7010.167.99.71
4210.167.99.72/2910.167.99.73 – 10.167.99.7810.167.99.79
4310.167.99.80/2910.167.99.81 – 10.167.99.8610.167.99.87
4410.167.99.88/2910.167.99.89 – 10.167.99.9410.167.99.95
4510.167.99.96/2910.167.99.97 – 10.167.99.10210.167.99.103
4610.167.99.104/2910.167.99.105 – 10.167.99.11010.167.99.111
4710.167.99.112/2910.167.99.113 – 10.167.99.11810.167.99.119
4810.167.99.120/2910.167.99.121 – 10.167.99.12610.167.99.127
4910.167.99.128/2910.167.99.129 – 10.167.99.13410.167.99.135
5010.167.99.136/2910.167.99.137 – 10.167.99.14210.167.99.143
5110.167.99.144/2910.167.99.145 – 10.167.99.15010.167.99.151
5210.167.99.152/2910.167.99.153 – 10.167.99.15810.167.99.159
5310.167.99.160/2910.167.99.161 – 10.167.99.16610.167.99.167
5410.167.99.168/2910.167.99.169 – 10.167.99.17410.167.99.175
5510.167.99.176/2910.167.99.177 – 10.167.99.18210.167.99.183
5610.167.99.184/2910.167.99.185 – 10.167.99.19010.167.99.191
5710.167.99.192/2910.167.99.193 – 10.167.99.19810.167.99.199
5810.167.99.200/2910.167.99.201 – 10.167.99.20610.167.99.207
5910.167.99.208/2910.167.99.209 – 10.167.99.21410.167.99.215
6010.167.99.216/2910.167.99.217 – 10.167.99.22210.167.99.223
6110.167.99.224/2910.167.99.225 – 10.167.99.23010.167.99.231
6210.167.99.232/2910.167.99.233 – 10.167.99.23810.167.99.239
6310.167.99.240/2910.167.99.241 – 10.167.99.24610.167.99.247
6410.167.99.248/2910.167.99.249 – 10.167.99.25410.167.99.255
01 / table

IPv4 CIDR prefix table.

Click a prefix longer than your network to split it into subnets.

prefixsubnet maskaddresseshostsin your /23
/00.0.0.04,294,967,2964,294,967,294-
/1128.0.0.02,147,483,6482,147,483,646-
/2192.0.0.01,073,741,8241,073,741,822-
/3224.0.0.0536,870,912536,870,910-
/4240.0.0.0268,435,456268,435,454-
/5248.0.0.0134,217,728134,217,726-
/6252.0.0.067,108,86467,108,862-
/7254.0.0.033,554,43233,554,430-
/8255.0.0.016,777,21616,777,214-
/9255.128.0.08,388,6088,388,606-
/10255.192.0.04,194,3044,194,302-
/11255.224.0.02,097,1522,097,150-
/12255.240.0.01,048,5761,048,574-
/13255.248.0.0524,288524,286-
/14255.252.0.0262,144262,142-
/15255.254.0.0131,072131,070-
/16255.255.0.065,53665,534-
/17255.255.128.032,76832,766-
/18255.255.192.016,38416,382-
/19255.255.224.08,1928,190-
/20255.255.240.04,0964,094-
/21255.255.248.02,0482,046-
/22255.255.252.01,0241,022-
/23255.255.254.05125101
/24255.255.255.02562542 split →
/25255.255.255.1281281264 split →
/26255.255.255.19264628 split →
/27255.255.255.224323016 split →
/28255.255.255.240161432 split →
/29255.255.255.2488664 split →
/30255.255.255.25242128 split →
/31255.255.255.25422256 split →
/32255.255.255.25511512 split →
02 / faq

About this calculator.

How do I use this subnet calculator?

▼

Type an IP address followed by a prefix, like 192.168.1.10/24, or by a subnet mask, like 192.168.1.10 255.255.255.0. Without a prefix it uses /24. Click a row in the table to split the network into smaller subnets.

Why are usable hosts always 2 fewer?

▼

The first address in a subnet is the network address and the last is the broadcast address, so neither can go to a device. The exceptions are /31 (point-to-point links, RFC 3021) and /32 (a single address), which use every address.

Can I use it from a terminal?

▼

Yes. curl 'ipku.in/en/tools/ipv4-subnet-calculator?q=192.168.1.10/24' returns the result as plain text.

Learn how to work it out →